So many options out there...definitely pic what works best for you. I've cut up a bunch of wood to make my own but it takes time to get around to it. Thanks for sharing your solution👊🏼
I use the Biznike. They're the cheapest ones on Ebay. They haven't let me down. I don't over tighten them. I screw them in somewhat loose so that they can slightly rotate, enabling the weight of deck to hang straight.
Good strategy to not tighten them all the way...I've been doing the same so I can easily level them off. I'll have to check out the Biznike...thanks for the heads up👊🏼
Thanks Andrew👊🏼 After a while of using the different mounting systems...I would recommend staying away from the eBay ones I found...they can be a real bugger getting the decks on and off because of a miss alignment.
Hey Jason, I'm thinking to design a new board hanger. Wanted to reach out to see if I could connect with you to hear your thoughts. Is there a way to connect? Thanks!
I definitely hear your concerns but all the wall mounts in this video are pretty solid. There's a skater in one of the FB groups I'm in that makes a solid wall mount...I would say it's my favourite.
The eBay find ones can fit pretty tight...I was just to get one deck off the wall and because they one side slides...it can create a weird angle and pinch...making it hard to get the deck off. I'm looking a buying smaller bolts for them.
@@rifsundergroundgrowmie2603 The only thing I would say about keeping them in shrink is that there is a lot of conversation around shrink burn. Most would say it's a good idea to get them out of shrink and let them breath unless you're looking at reselling soon.
@@80slove but im really want to keep these new natas i got OG... Im really torn the teal metallic foil is going for around 400 right now I'm not going to resell ever but I just want to keep them as original as possible
@@80slove yup he has everything it's the best shop ever ! Super great selection Will the kid who works there is a solid shredder! If you look up Stoke in the dictionary his picture is right there ! My bro that owns it Bob Losito his son skates for Streetplant ! Seriously the nicest people you will ever meet !
Just get 1 inche x 3 inches piece of wood of acrylic and get the hardware for mear fractions of the cost.
So many options out there...definitely pic what works best for you. I've cut up a bunch of wood to make my own but it takes time to get around to it. Thanks for sharing your solution👊🏼
I use 3M Claw hangers and some fishing line. Cheapest solution I've found and no big holes in the drywall.
Good idea...I have many holes in my walls lol.
I use the Biznike. They're the cheapest ones on Ebay. They haven't let me down. I don't over tighten them. I screw them in somewhat loose so that they can slightly rotate, enabling the weight of deck to hang straight.
Good strategy to not tighten them all the way...I've been doing the same so I can easily level them off. I'll have to check out the Biznike...thanks for the heads up👊🏼
Next summer when my wall mount comes out I guarantee you will like it
Stoked to see them!
That "bullet" looking nut is called an acorn nut, commonly found on car valve covers
Some good info there👊🏼
great video man :)
Thanks Andrew👊🏼 After a while of using the different mounting systems...I would recommend staying away from the eBay ones I found...they can be a real bugger getting the decks on and off because of a miss alignment.
Hanging it on a string seems cheaper and less stress on the boards
Some worry about the string cutting into the graphic but many do use it.
Hey Jason, I'm thinking to design a new board hanger. Wanted to reach out to see if I could connect with you to hear your thoughts. Is there a way to connect? Thanks!
Hi Tom...you can find me on Facebook under Jason Rusnak or on Instagram @rusnakjay I look forward to hearing from you.
Not sure I’d want a 500$ deck to hang on a drywall screw or even with a plug . What about those butterfly that open up behind the drywall board
I definitely hear your concerns but all the wall mounts in this video are pretty solid. There's a skater in one of the FB groups I'm in that makes a solid wall mount...I would say it's my favourite.
Me and my wife were just talking about that I was just going to ask you how you do it.
The eBay find ones can fit pretty tight...I was just to get one deck off the wall and because they one side slides...it can create a weird angle and pinch...making it hard to get the deck off. I'm looking a buying smaller bolts for them.
@@80slove I think I'm going to try to make a couple for my Natas board's because I want to keep them in the cellophane without popping holes in it
@@rifsundergroundgrowmie2603 The only thing I would say about keeping them in shrink is that there is a lot of conversation around shrink burn. Most would say it's a good idea to get them out of shrink and let them breath unless you're looking at reselling soon.
@@80slove will do thank you the hell with that cellophane😠
@@80slove but im really want to keep these new natas i got OG... Im really torn the teal metallic foil is going for around 400 right now I'm not going to resell ever but I just want to keep them as original as possible
My bro sells those at his shop they are the dope stuff !
The Sk8ology?
@@80slove yup he has everything it's the best shop ever ! Super great selection Will the kid who works there is a solid shredder! If you look up Stoke in the dictionary his picture is right there ! My bro that owns it Bob Losito his son skates for Streetplant ! Seriously the nicest people you will ever meet !
@@toddpisano352 That's amazing...love the local shops!! Sounds like a great team.