Nice to see you at BRS, Thomas. Your way of talk which keep adding layers of comments is very different than Ryan/Randy which always informative, direct and thorough. Thus it brings flavor to BRSTV. Good job Thomas, good job BRSTv.
I seriously wish I'd seen these videos before I set up my tank with a hang on back overflow. This product and that skimmer that you guys used on the 40 breeder along with a hang on fuge seems like the prefect setup for people without drilled tanks.
Good to see & hear you again Thomas. I have saltwater supplies out the wazoo but never did anything with it. Maybe one day. BRStv is smart to hire you. ❤
I would have loved to have seen this on a rimmed tank to see how well wires and stuff go around the lip and how high you can put it underneath the lip. I cant buy the product if it looks like I have to run the water an inch lower than normal to give room for the cords and such around the lip and I don't want to trim the lip to make it fit.
I have a standard Duetto on my sumpless 20 gallon rimmed tank. Only problem was snails would crawl on sensor. Wrapped a rubber band around the circumference of sensor. Got a small plastic pill bottle and drilled some small holes in it and placed the bottle over sensor as a snail guard. Worked great for the half year it's been on. Don't see a need for this more expensive solution as I use a Tidal hang on filter which surface skims.
Hey Thomas, nice review as usual. Got a question tho... Will it work well on a 35 Galon tank? The surface skimming capability will help not to buy a dedicated surf. skimmer. No sump here, just a canister Fluval 207 and a HOB Buggle magnus QQ3 . Thanks!
Is the reversible flexi pump supposed to run all the time? I just bought this a week ago…the skimmer pump worked for 3 days and now hadn’t come on since. 🤔
Yes, but if you don't want the box, just go with the stand alone Duetto ATO. It's actually on sale right now too! www.bulkreefsupply.com/duetto-dual-sensor-complete-aquarium-ato-system-xp-aqua.html
This auto top off system already has a built-in pump, so no need for any additional equipment. If you're dosing two part, you can use a dosing pump without issue. While they're both commonly used in the hobby, they function independently.
Bulk Reef Supply lol I know that I’m asking is there a way to run the 2part tubes thru this system. Like attach the tubes somewhere? Trying to figure out how to dose without a sump. Thanks
Sorry ppl...but side note : the yellow tang is underrated tremendously in a display tank nothing will give u the bright splash of yellow like the yellow tang I'm new to the hobby and wish i put at minimum 3 yellow tangs in
Anyone who has a sumpless tank already has a filter with a media box, likely a HOB. Consequently, the extra "overflow box" serves no purpose that I can determine. Just get the regular ATO , mount it in your tank along with the supply hose to your reservoir, and you've saved yourself $30.
Without the other part how will the sensor sense water level in high turnover rate that has a lot of surface agitation? From what you’re saying a high surface agitation will keep pumping water every few secs when the water dips
Nice to see you at BRS, Thomas. Your way of talk which keep adding layers of comments is very different than Ryan/Randy which always informative, direct and thorough. Thus it brings flavor to BRSTV. Good job Thomas, good job BRSTv.
Woooooot I was expecting to see Bryan or Randy but then I got freaked seeing Thomas, that’s was weird but cool, nice addition to the crew
I seriously wish I'd seen these videos before I set up my tank with a hang on back overflow. This product and that skimmer that you guys used on the 40 breeder along with a hang on fuge seems like the prefect setup for people without drilled tanks.
Great job Thomas awesome to see you back in your element in your new home yayyyyyyyyyy SOOOO EXCITE FOR WHATS TO COME FROM YOU AND BRSTV
Good to see & hear you again Thomas.
I have saltwater supplies out the wazoo but never did anything with it.
Maybe one day.
BRStv is smart to hire you. ❤
My dude, I have a sump and a duetto ato but you make me want to use this. Glad to see you with BRS.
I would have loved to have seen this on a rimmed tank to see how well wires and stuff go around the lip and how high you can put it underneath the lip. I cant buy the product if it looks like I have to run the water an inch lower than normal to give room for the cords and such around the lip and I don't want to trim the lip to make it fit.
Jump on the #askbrstv facebook group and I'll put a short vid of it running on a standard 10 gallon for you!
Was gonna say the same. Thanks Thomas, I'll go look
I have a standard Duetto on my sumpless 20 gallon rimmed tank. Only problem was snails would crawl on sensor. Wrapped a rubber band around the circumference of sensor. Got a small plastic pill bottle and drilled some small holes in it and placed the bottle over sensor as a snail guard. Worked great for the half year it's been on. Don't see a need for this more expensive solution as I use a Tidal hang on filter which surface skims.
What does the rubber hand do? Was the pill bottle small enough where it just goes over and grips the ato?
Is this overflow constantly pulling water throughout the entire box ?
This will be awesome for people who use 10g and 20g aquariums for QT systems.
Can this be used on 30 gallon tank?
keep on tanking?
Hey Thomas, nice review as usual. Got a question tho...
Will it work well on a 35 Galon tank? The surface skimming capability will help not to buy a dedicated surf. skimmer. No sump here, just a canister Fluval 207 and a HOB Buggle magnus QQ3 . Thanks!
this would be really nice if you could put the suction line on the aquaclear in the over flow box, the fact it has media is kinda dumb...
Is the reversible flexi pump supposed to run all the time? I just bought this a week ago…the skimmer pump worked for 3 days and now hadn’t come on since. 🤔
Thomas from big als to brs??
Move'n on up!
So did BRS poach you from Big Al's? :D
BRS took advantage of Big Al's terrible decision :) ua-cam.com/video/ULaGRTKU82M/v-deo.html
Can this be used without the box ?
Yes, but if you don't want the box, just go with the stand alone Duetto ATO. It's actually on sale right now too!
www.bulkreefsupply.com/duetto-dual-sensor-complete-aquarium-ato-system-xp-aqua.html
@@BRStv thanks I appreciate it..
My ATO fills too late (I am also sumpless). Do you think this would put an end to my salt fluctuating? My acros wanna know lol
Merci pour ta vidéo !!! 👍👍👍
I'd like to get your take on the new Red Sea Reefwave gyre powerhead,looks good to me.
Hopefully we get our hands on some soon! :)
Can i use an aquaclear 70 on the box? The intake into the box? Is there space? With the ato inside
There would not be enough room unfortunately
Question please: can I use a 2 part Dosing pump on this. Or how would that work with no sump??
This auto top off system already has a built-in pump, so no need for any additional equipment. If you're dosing two part, you can use a dosing pump without issue. While they're both commonly used in the hobby, they function independently.
Bulk Reef Supply lol I know that I’m asking is there a way to run the 2part tubes thru this system. Like attach the tubes somewhere? Trying to figure out how to dose without a sump. Thanks
Sorry ppl...but side note : the yellow tang is underrated tremendously in a display tank nothing will give u the bright splash of yellow like the yellow tang I'm new to the hobby and wish i put at minimum 3 yellow tangs in
How big is your tank? The tang police are waiting to hang you.
Anyone who has a sumpless tank already has a filter with a media box, likely a HOB. Consequently, the extra "overflow box" serves no purpose that I can determine. Just get the regular ATO , mount it in your tank along with the supply hose to your reservoir, and you've saved yourself $30.
Without the other part how will the sensor sense water level in high turnover rate that has a lot of surface agitation? From what you’re saying a high surface agitation will keep pumping water every few secs when the water dips
@@MrDon967 Sensor placement matters unless you have a tsunami tank.
Yay Thomas !!!
That’s sleek
Xp aqua sucks my tank over filled and their customer service is horrible its cheap junk!
Pure junk don’t BUY customer service sucks if anything does happen which it probably will
s