he went from 5200 subs to 116.000 subs in less then a year of me watching, he is popular lol, hes like the american kid version of garage54 in USSR lol
You almost started a fire. I seen an 18 wheeler catch on fire because the driver pumped way too much grease in the wheel bearings and the friction from the brakes burned the wheel off.
The brakes convert kinetic energy to heat, if you start breaking at the same speed, they MUST get up to the same temperature no matter what you do as long as you dont lock up.
Contaminated pads are the way to go.. The break in time is longer and the sound is terrible.. But they grab harder and stop faster.. On the track we soak our pads in oil for this reason.. It actually works! But you will have to change them sooner.. I can only imagine grease is similar 🤷♂️
fill the tires with water! then fill the forks with water. Make the bike belt drive. Put cooking oil in it for engine oil. Put the wrong spark plug in it. Put the forks on upside down and take the back fender off, Ride it upside down
I mean, I like the channel so far. Im just bummed we haven't seen any ramps. Not even a long jump competition. Let's see some x games back yard edition.
I have seen break lines boil fluid when being ridden hard enough on a track. I bet it started to boil and introduced gas into the break line, which would explain why his breaks came back when it started to cool.
You need to use a better brake fluid, that one is boiling, that's why the brake lever is softer, a DOT 4 should work fine for that bike, has like 500° boiling point when new.
The brake fluid was so hot that the molecules were far apart, so when they pressed the brake it was as if there was little fluid, as it was not very dense.
The reason you started getting brakes back is because it was hot enough your brake fluid started to boil I race dirt modified it happens because it takes brakes to go fast
Everyone saying the brake fluid is boiling is very wrong.. If that was the case the lever would get harder.. The pad is contaminated and now compromised.. But it’s actually still a decent brake.. Water and air can’t be pressurized the same as a gas.. Brake fluid is not boiling off into water or air.. it may become a gas for a while. But as said before, that will increase brake pressure.. Brake fade is caused by that and you will get absolutely no braking if you get there.. But good luck trying 😂
The fluid gets hot, starts to boil until the pressure reaches the point it can't boil anymore because its in a closed loop. Now you have brake fluid and vaporized brake fluid in the system. When pressing the lever you compress all the vaporized brake fluid first and then the liquid starts moving to advance the pistons. The bite point moves based on the temp of it all. If he got it hotter the brakes would be fully gone for some time. Also its bad for the fluid to do this a lot.
My front hydraulic brake on my mtb always gets greasy somehow, it is squeaky and it stops very badly and you gotta push it fully if you want it to do anything, you can feel that your finger slides easily when dragging it on the rotor, but when I go drop down a hill just using the front brake and then it starts throwing me over the bars, it gets even too good. One time I was riding thru the crosswalk one handed and I pressed on the brake veeery lightly and I was like 60° in the air... I've degreased the pads and resurfaced the rotors many times, but they still get back to this condition sadly, idk what it is.
I think a seal is leaking in your caliper. Happens a lot. Depending on what brakes you have get a new caliper or whole brake set. If there expensive, you can buy seal kit for the calipers form you're local bike shop or aliexpress. Recommend having an air compressor to help with removing the pistons. Don't forget bleeding afterwards. It's probably mineral oil. Maybe DOT.
One of my collegues once tried to tell me that you oil brakes. I tod him that hed kill himself if hed ever try that because the brewk pads will suck that oil up like a sponge and he WILL crash. He got angry and tried to tell me that i dont know anything about cars and he knows hes right. (he tends to have an attitude because he thinks hes the smartest) I guess you cant fix stupid.
Today i was casuallydrving my dirtbike top speed like usual and hit a rock thought no big deal that happens all the time kept riding prob like 50mph then i started drifting i was saying damnit and stopped well my 12 year old tire gave up and the tube popped further inspection discovered severe dry rot on the tire
@@melomelo420 let's say a 6ft guy wanted to go on a Honda QR50, it would die, the bike wouldn't be able to move with all the weight, and a TTR50 is just the same except it has an extra 6 inches or so of seat height.
Don't fall off lil bro, do whatever it takes. I wanna see you popular in atleast a year.
he went from 5200 subs to 116.000 subs in less then a year of me watching,
he is popular lol, hes like the american kid version of garage54 in USSR lol
@@BeamerTheFoxyooo another person who watches garage 54!
Fr
Ssssssssssssssssssssssimp bot
@@CJTJBI1aye I like garage 54 I think zoomin should watch them if he hasn’t
ABS on a budget 😤😤
Anti-braking system
the brake lever going soft is from the fluid boiling and turning into vapour
Yeah they ran those brakes so hot that it definitely passed the boiling point
Nah dem boi's could put another tree fiddy on that stopper before it stops stoppin! /s@ONEMoneyONE
I believe it's water/moisture that has absorbed into the break fluid which boils rather than the break fluid itself
@@sandwich.entity3810 nah the water simply lowers the boiling point, so the fluid does indeed boil
“Lemme touch it. OHHHH YEAHHH 😫” - camera man 2024
The brake fluid probably boiled
Ur brakefluid is boiling,this cause squishy levers
You almost started a fire. I seen an 18 wheeler catch on fire because the driver pumped way too much grease in the wheel bearings and the friction from the brakes burned the wheel off.
😂
Throwback to the legendary atv brake test
Prolly boiled the brake fluid when it totally lost brakes and came back slowly
The brakes convert kinetic energy to heat, if you start breaking at the same speed, they MUST get up to the same temperature no matter what you do as long as you dont lock up.
that is soo cool. i never really thought about in when grease is applied, but yeah only the stopping distance will be longer. (idealy)
Contaminated pads are the way to go..
The break in time is longer and the sound is terrible..
But they grab harder and stop faster..
On the track we soak our pads in oil for this reason..
It actually works!
But you will have to change them sooner..
I can only imagine grease is similar 🤷♂️
Dumb
foot slaps from camera man are crazyyyyyy LMAO!
Bro is going to be the next Winston diesel
I always clean my brakes with SC1 before i ride :))))
Please hit my line for safety consultations😂😂this was definitely dangerous but entertaining as ever
put a 3d printed superbike front piece on your dirt bikes see if it makes them faster because it would be aerodynamic
It wont make a difference. Dirt bikes are too slow. Aerodynamics doesn't really affect motorcycles too much below 90 mph.
bro is like whistlindiesel of dirtbikes
took warming up your brakes to another level
Next time I buy a used dirt bike, I’m checking if they have a gold helmet. Not taking any chances.
bro cameraman i can hear your heavy ass breathing dawg
Camera man getting exited!
face rev when
@@cdesign131Gesicht Umdrehung Wann?
Nevveerrrr, it's like master chief, the mystery is part of the character 👌
Bot
@@Nck40haha
Fr
Top ten best channels
w vid like always makes my day
Put grease in the gas tank 😂
it would probably run and smoke like hell , the fuel would dissolve the grease until the fuel becomes too thick. good idea tho :)
this is the most cientific shit ive ever seen
That was called brake fade when you heat up the pads to the point they're almost useless..
5:20 Sounds exactly like crane, that long legged bird.
GREASY BRAKES
Day 6 of asking Zoomin to big bore kit the red Moped
fill the tires with water! then fill the forks with water.
Make the bike belt drive.
Put cooking oil in it for engine oil.
Put the wrong spark plug in it.
Put the forks on upside down and take the back fender off, Ride it upside down
Those street gutters are always like test points for ur experiments
Remember brake fluid gets warm too so that can affect how much pressure you can use on the brake system
put ethanol in the gas tank
he already did lol
You got balls to go fast like that then just grab a hand full of front brake… props 🎉
I mean, I like the channel so far. Im just bummed we haven't seen any ramps. Not even a long jump competition. Let's see some x games back yard edition.
You should make a rotor with no vent holes and see how it cools down
they make them everyday
Glad to see I’m not the only one to have done this, except I used WD40 lol!
I have seen break lines boil fluid when being ridden hard enough on a track. I bet it started to boil and introduced gas into the break line, which would explain why his breaks came back when it started to cool.
Ahh yes all we needed was oiled up brakes
Boiled the fluid
bro´s gonna be sooo popular, i can feel it
Oh no. OH NO HE GOT A SCOOTER!!!
This channel is basically Garage 54 but with bikes
love ur vids never stop making them
Zoomin all ways baddass all ways
Love the videos man keep em up
Whistlindiesel without the psycho ADHD, you have my sub
imagine the rotor warped and locked up his front wheel dude would be regretting it
my man still got the speed sprocket
bro's actually the first to try this
You need to use a better brake fluid, that one is boiling, that's why the brake lever is softer, a DOT 4 should work fine for that bike, has like 500° boiling point when new.
12:07 y’all boiled the fluid lol
Bro when I saw the title I knew the vid was gonna go crazy. Keep up the stupid ideas 💀
The brake fluid was so hot that the molecules were far apart, so when they pressed the brake it was as if there was little fluid, as it was not very dense.
U should put two stroke fuel in that bike 😂😂
The reason you started getting brakes back is because it was hot enough your brake fluid started to boil I race dirt modified it happens because it takes brakes to go fast
RIP your brake fluid
"i lost my brake, what the heck?"
that tiny rear gear
No different to having a leaking fork seal haha
_bearings and caliper seals have left the chat_
You should take the muffler off on cameraman scooter
I love your content
No…. Bad….. NEVER GREASE OR LUBE YOUR BRAKES PEOPLE!!!!!
keep up the work bro
Ive been waiting 🙏
One bit of grease gets on that tyre bro it’s gonna be like Hitting ice and not the fun type
Venus temp disk brakes.
when did you get 100k subs!??!?! last i checked you had 3k lmao
i been here since 21 k😎
Everyone saying the brake fluid is boiling is very wrong..
If that was the case the lever would get harder..
The pad is contaminated and now compromised..
But it’s actually still a decent brake..
Water and air can’t be pressurized the same as a gas..
Brake fluid is not boiling off into water or air.. it may become a gas for a while.
But as said before, that will increase brake pressure..
Brake fade is caused by that and you will get absolutely no braking if you get there..
But good luck trying 😂
The fluid gets hot, starts to boil until the pressure reaches the point it can't boil anymore because its in a closed loop.
Now you have brake fluid and vaporized brake fluid in the system. When pressing the lever you compress all the vaporized brake fluid first and then the liquid starts moving to advance the pistons. The bite point moves based on the temp of it all. If he got it hotter the brakes would be fully gone for some time. Also its bad for the fluid to do this a lot.
mod that scooter and ill sub
we need wd40 on the brake next
Beware of the cow.
I was wondering how to get ABS on my bike...that front brake is waaaaay too touchy.
Whistlinpetrol
My front hydraulic brake on my mtb always gets greasy somehow, it is squeaky and it stops very badly and you gotta push it fully if you want it to do anything, you can feel that your finger slides easily when dragging it on the rotor, but when I go drop down a hill just using the front brake and then it starts throwing me over the bars, it gets even too good. One time I was riding thru the crosswalk one handed and I pressed on the brake veeery lightly and I was like 60° in the air... I've degreased the pads and resurfaced the rotors many times, but they still get back to this condition sadly, idk what it is.
I think a seal is leaking in your caliper. Happens a lot. Depending on what brakes you have get a new caliper or whole brake set. If there expensive, you can buy seal kit for the calipers form you're local bike shop or aliexpress. Recommend having an air compressor to help with removing the pistons. Don't forget bleeding afterwards. It's probably mineral oil. Maybe DOT.
you guys should try break fluid or shock oil
are you the guy who used to paint the scooter tires on tiktok?
One of my collegues once tried to tell me that you oil brakes.
I tod him that hed kill himself if hed ever try that because the brewk pads will suck that oil up like a sponge and he WILL crash.
He got angry and tried to tell me that i dont know anything about cars and he knows hes right.
(he tends to have an attitude because he thinks hes the smartest)
I guess you cant fix stupid.
Forgot pads existed
Today i was casuallydrving my dirtbike top speed like usual and hit a rock thought no big deal that happens all the time kept riding prob like 50mph then i started drifting i was saying damnit and stopped well my 12 year old tire gave up and the tube popped further inspection discovered severe dry rot on the tire
due for a nice greasing frfr
try this with silicon spray next, i bet you'll see an immediate change
11:59 i think that happened because your brake fluid is boiling
Crazy I just got a TTR 50
Either you're a child and you got it as a gift or... you bought it for a child and you are an adult, which one?
Might be adult wanting fun and small bikes = fun @@sethFW
@@melomelo420 let's say a 6ft guy wanted to go on a Honda QR50, it would die, the bike wouldn't be able to move with all the weight, and a TTR50 is just the same except it has an extra 6 inches or so of seat height.
@@sethFW yep
What was the brand of the small sprocket that you did the video of
I wanna be like you when I get older
Next video put 2 stroke mix oil in your 4 stroke gas tank and go for a ride please.
Mhm so appetizing
if you overweighed it with a bunch of weight i bet you could make it to 1000 º
Built a gokart and modifie the shit out of it
get like a xr400
smokerrr
Bro I love your content don't give up❤
Brake fluid is boiled 11:40
go top gear and then shift it to first and see what happens
Do it with the small sprocket
Get a Chinese bike and test it😂