The $20 Original Xbox Internal HDMI Mod: ElectronAnalog

Поділитися
Вставка
  • Опубліковано 20 гру 2024

КОМЕНТАРІ • 50

  • @jamesdavies686
    @jamesdavies686 3 місяці тому +5

    a 10uf 16v tantalum would be a better choice to replace that radial SMD cap. Shouldn't use ceramic caps to replace a polarized cap.

    • @newrez
      @newrez 3 місяці тому +3

      Can I ask - why not?

  • @TheCod3r
    @TheCod3r 3 місяці тому +8

    EvoX dash is butt cheeks lol

  • @pogman15
    @pogman15 3 місяці тому +2

    as its just an internal version of the adaptors idk why someone would go this route over stellar or hd+ with cerbios, considering the work involved the external adaptor seems the best way to get analogue out a hdmi at a low cost and effort. its only benefit being no dongle at the cost of doing more work than installing one of the more expensive better options.

  • @BorderlineOCD
    @BorderlineOCD 3 місяці тому

    Very nice work and some fine soldering skills 👌🏻

  • @Andr0-Zero
    @Andr0-Zero 3 місяці тому +2

    Wooo! OG Xbox Action! Maybe I should send you the HDMI solution I got from N64freak years ago.

  • @Mareka6969
    @Mareka6969 3 місяці тому +8

    is it just me or does Wii2HDMI look best?

    • @SeanPennII
      @SeanPennII 3 місяці тому +1

      It looks so good. I have three xbox adapter thingies. Theyre def worth owning

    • @ichigo3223
      @ichigo3223 3 місяці тому +1

      The color looks too saturated compared to the Stellar and Electron. Might look ok in the video, I bet it looks horrible in person when compared side by side.

  • @aceconsolerepairs
    @aceconsolerepairs 3 місяці тому +3

    Nice work ShawnACE 😊

  • @fatalisticend
    @fatalisticend 3 місяці тому +1

    So this is basically just a slightly polished version of what existed 5yrs ago 😂

  • @topvint8787
    @topvint8787 Місяць тому

    I did this with wiring and not the QSB. The output isn't good, with jailbars quite noticeable in black screen. I wonder if this is noise introduced by the wiring. I used 30AWG for the signals and 24 for ground and power. I tried to keep the wires short but they do cross around. Any thoughts?

  • @Punisher1_1995
    @Punisher1_1995 3 місяці тому +1

    How would I mount this in a Phat PS2?

    • @Techbabblers
      @Techbabblers  3 місяці тому

      That i am not sure, I haven't done one in a PS2 yet.

    • @Punisher1_1995
      @Punisher1_1995 3 місяці тому

      @@Techbabblers oh ok, ill sub and hope you make one.

  • @ryutenmen
    @ryutenmen 3 місяці тому

    Wii2HDMI is the best, it literally cost 2 bucks. As for the soldering skills, you need them for all three mods.

  • @NitNek_
    @NitNek_ 3 місяці тому

    EvoX was my fav dash!

  • @ViSSrox
    @ViSSrox 2 місяці тому

    with one is the best? Electron Shepherd, Wii2Hdmi or XboxHD+ ?

    • @Techbabblers
      @Techbabblers  Місяць тому

      HD+ has wayyy more features

    • @ViSSrox
      @ViSSrox Місяць тому

      @@Techbabblers like what?

  • @95Comics
    @95Comics 3 місяці тому +1

    What is the mod chip with the most features to install?

    • @mikehumphrey7868
      @mikehumphrey7868 3 місяці тому +1

      Cerbios

    • @SomeAngryGuy1997
      @SomeAngryGuy1997 3 місяці тому

      ​​@@mikehumphrey7868 That's a BIOS, not a modchip. You can flash it to any modchip.
      As for the question, I would have liked to say "Stellar", but half the features aren't even implemented, and the rest don't work right

    • @L0tsen
      @L0tsen 3 місяці тому

      @@mikehumphrey7868 thats a BIOS not a modchip

    • @L0tsen
      @L0tsen 3 місяці тому +3

      Openxenium with prometheos. It is the most modern modchip with the most features. You could also do a tsop flash if you have a 1.0-1.5. I would go with the tsop since it's free if you have a soldering iron

    • @tony85885
      @tony85885 3 місяці тому +1

      Easy mod chip to install is raspberry pi with modxo

  • @anthonyaviles8665
    @anthonyaviles8665 3 місяці тому

    How did you buy the pcb from him

    • @Techbabblers
      @Techbabblers  3 місяці тому

      You can try emailing him but otherwise, doesn't seem to be any other way

  • @liamcooper-d1f
    @liamcooper-d1f 3 місяці тому +1

    How did you get the QSB? Seems your link is a german version of craigslist / gumtree. How can i get the QSB if UK based?

    • @Techbabblers
      @Techbabblers  3 місяці тому

      Would have to reach out to the seller in the listing unfortunately. I can't seem to find any US/UK listing

  • @dazamad
    @dazamad 3 місяці тому

    Which hdmi mod was easiest to install? My old eyes cant tell the difference. Thanks

    • @Techbabblers
      @Techbabblers  3 місяці тому

      Wii2HDMI felt the easiest since it was soldering the QSB and soldering the HDMI on-top of the QSB with minial wires needed.

  • @harrysacket
    @harrysacket 3 місяці тому

    It's hard to say but it looks to me like wii2hdmi has the best output. Am I wrong?

    • @Techbabblers
      @Techbabblers  3 місяці тому

      Wii2HDMI seems to have a higher brightness on the output is what I noticed

  • @jelkobg5944
    @jelkobg5944 3 місяці тому

    Is there a place from where I can get it in EU, shipping cost is insane

    • @Techbabblers
      @Techbabblers  3 місяці тому

      Would have to reach out to the seller in the listing unfortunately. I can't seem to find any US/UK/EU listing

  • @marktoo9454
    @marktoo9454 3 місяці тому

    Shawn... Its really u.. 🤣😂