Street find: Indesit condenser tumble dryer: cleaning and fault finding

Поділитися
Вставка
  • Опубліковано 1 жов 2024
  • if your condenser dryer is not drying properly or just taking ages to dry check out this simple fix.
    Indesit Hotpoint Beko Condesner Tumble Dryer IDCE8450 B H
    Join this channel to get access to perks:
    / @bootsowen
    Donate: paypal.me/bootsowen
    Support: / bootsowen
    www.amazon.co....
    You can buy tools and parts, or things you were going to buy anyway from Amazon through the affiliate program and I may receive a commission for the sale. This has no effect on the price for you. The links used are affiliate links. As an Amazon Associate I earn from qualifying purchases.

КОМЕНТАРІ • 19

  • @CarwashMairhuber
    @CarwashMairhuber 3 місяці тому +3

    The pump on this dryers is- as far as i know- running during the whole cycle

  • @balfie18
    @balfie18 3 місяці тому +4

    Nice little find. 2017 model, it's when they used the older serial numbers so the first number of the serial number gives the year, in this case 7, would either mean 2007 or 2017, too new to be 2007 so 2017. Opening the door during the cycle is terrible for the machine, will end up popping the one shot stat and it will stop heating. As I said on your other video, pump runs all the time on this, float switch will stop the heat from coming when full of water, belts are easy enough to change, around 15 mins or so and ya done, making sure it's on the pulley wheel the right way, that filter tho defo needs to be replaced, all the lint will end up inside the machine and be a nightmare. First thing I generally check is drum turn, if ya spin it by hand, no resistance, belt gone. No heat, one shot gone, no water, pump gone, other than that they are pretty simple.

    • @bootsowen
      @bootsowen  3 місяці тому +1

      You'll have a good cringe in the upcoming repair video. 45 mins or thereabouts!

    • @theoddjobcentre6686
      @theoddjobcentre6686 2 місяці тому

      ​@@bootsowenYou set it to timed dry when you pressed the button down to 1 hour

  • @TheInfoworks
    @TheInfoworks 3 місяці тому +3

    Bit of a shock, there's actually a fault, cheers

  • @diamant1081
    @diamant1081 3 місяці тому +4

    Does people stopped cleaning their washers and dryers? Logically that you dump the dryer when it is so dirty that it can't do a proper job anymore. So much money is wasted with a much higher electricity bill and eventually dumping these machinery.

    • @danandlaundry
      @danandlaundry 3 місяці тому +1

      My tumble dryer is fairly clean as I get the vacuum cleaner in there frequently

  • @mariieett010
    @mariieett010 2 місяці тому +2

    how do you find so many washing machines?!

  • @plodno9867
    @plodno9867 3 місяці тому +2

    I love you're video's man

  • @danandlaundry
    @danandlaundry 3 місяці тому +1

    Just needs a new belt and new filter and it should be good to go

  • @danandlaundry
    @danandlaundry 2 місяці тому +1

    My hotpoint dryer has the same filter as this indesit only it doesn't have a hole in it

  • @theoddjobcentre6686
    @theoddjobcentre6686 2 місяці тому +1

    Pump on my old Hotpoint used to run all the time

  • @Volvotech740
    @Volvotech740 3 місяці тому +1

    i don´t like condenser or Heatpump dryers because they don´t dry so well or so quickly

    • @danandlaundry
      @danandlaundry 3 місяці тому

      Also I can't have a vented dryer as there is no vent in my house or shed for a vented dryer

  • @indesitlghotpointwashingma8305
    @indesitlghotpointwashingma8305 2 місяці тому +1

    When's part 2

  • @NeathVideos
    @NeathVideos 3 місяці тому +2

    Don’t turn off a dryer when it’s hot,as the residual heat coming of the heater elements,is enough to trip the one shot thermostats sometimes,always give it a few
    Minutes on cool air to allow the heater to cool
    Off