How-to: cleaning deep fryer

Поділитися
Вставка
  • Опубліковано 5 вер 2024
  • Deep fried foods can be delicious. On the other hand, not a lot of household appliances are so difficult to clean as a deep fryer. Do you want to know the easiest way to clean your deep fryer? With Feem Active Cleaner of course!

КОМЕНТАРІ • 17

  • @Spoordr
    @Spoordr 5 років тому +14

    Holy Smokes! A video that doesn’t have a 5 min talking intro that shows exactly what the description says... 🤯

  • @stevehendricks4982
    @stevehendricks4982 4 роки тому +34

    maybe a better idea is to actually clean a dirty fryer

    • @donhughes8465
      @donhughes8465 2 роки тому +1

      Yeah one thats made fries ten or fifteen times in between cleans. Then we'll see how good it is! I'd want the oil to be at least amber coloured...

  • @DavidTheNickjrFan2003
    @DavidTheNickjrFan2003 2 роки тому

    What do you do with the water and feem mixture when done

  • @ThyBountyHunter
    @ThyBountyHunter 3 роки тому +1

    With oil that clean....the "dirt" is questionable. On my do not buy list.

  • @jonneilsmyth9107
    @jonneilsmyth9107 4 роки тому +1

    dude how do you do the outer if its plastic its really crappy anyone any ideas apart from bin it ??

  • @pollymars3776
    @pollymars3776 3 роки тому

    Help!
    I have an ultimate T-Fal deep fryer. I've been using it this entire week and I just found some leftover crumbs that got into the filter and I have no way of cleaning the leftover particles out because the filter is sealed. Is there a way I can remove the crud inside my filter?

  • @boredweegie553
    @boredweegie553 3 роки тому

    I just need to know how to dispose of the oil

  • @justinh8167
    @justinh8167 3 роки тому +3

    How to: Clean a BRAND NEW deep fryer....

  • @pablodalisay8811
    @pablodalisay8811 3 роки тому +1

    Make a video in cleaning a 1.2L deep fryer, I think it can't be disassembled.

    • @JA238979
      @JA238979 3 роки тому

      I adapted this technique to a 1.1L deep fryer that cannot be disassembled, and it worked well. You just want to avoid any power input, be very careful with permeable spots (like control areas and places where metal meets plastic, and keep the bottom facing the floor while cleaning it). That worked for me with method all-purpose naturally derived surface cleaner, disposable paper towels, and a sponge that has a green side for scraping and a softer side for light duty. Use a more expensive non-sticking blue sponge instead of the type that I used. You have to put some strength into the scrubbing while also being careful not to screw anything up too much. I got some water into parts where it should not be, so I put it in front of a fan. It is worth it after you see it clean and that it ready to use, give away, or sell after it dries.

  • @thelmanih9301
    @thelmanih9301 5 років тому

    Don't u clean d top part?

    • @beedee9534
      @beedee9534 4 роки тому

      Yeah my is gunk up with thick grease chunks and hard clumps any methods

  • @ricefields9121
    @ricefields9121 3 роки тому

    This is acceptable

  • @wraithsrath7310
    @wraithsrath7310 3 роки тому +1

    Clean a clean fryer how hard is that really 🤔.