It was a DIY project that spent a lot of time on various issues from the start. And that's how it ended up. The parts used were supported by Flipsky.- flipsky.net/ Please check the description box below for parts information and other information. 시작부터 여러가지 문제들로 정말 많은 시간이 소비된 DIY프로젝트였습니다. 그리고 결국 이렇게 완성되었습니다. 사용된 부품들은 플립스카이로부터 지원받았습니다. flipsky.net/ 제품정보 및 기타정보는 더보기란을 확인해주세요.
what are the issues you've encountered with this build? After watching your videos , i decided to make my own diy build , but it failed because of the poor vesc controller and one of the motors i bought from flipsky.
I don't think you give yourself enough credit. I love the look of it. You should add clear grip spray to the top of the deck. I love the look of this more then most boards out there. I have the BoundFlash board thanks to your video, but I prefer wood decks myself. Looks classy :D. Great work. Keep it up. Looking forward to the ride.
⚡ *Bro, those trucks!* 🤩⚡ First one minute my jaw dropped and stayed dropped, I'm a trucks & bushings geek 😂 fascinatin! I've seen a similar design truck but first time this wide and this much detail and information 👌🏼🤙🏼 Sammy 40T is my favourite esk8 cell 👀 Good value,reliable. Your craftsmanship is insane! I can't even cut a piece of paper straight 😂😭 Dude, you are a master of arts. I'm lookin forward to hearin/seein how the board feels like to ride with those trucks!
I am also curious about the performance of the truck. I'm planning to try riding tomorrow. This build was really difficult because the plan was modified several times and unexpected problems occurred. But looking at your compliment, I think it ended well HaHa :) Thank you, Bro as always~
I've always wondered about those additional bushings. I bet they'd help more for one side. The side pressure goes on more than the other side. I like this. Also, it looks like it'll absorb bumps more if mounted the other way. Perhaps it steers more responsive? The metal extensions past the deck look awesome! They contrast the wood well
Kami I desperately need your help! Can you tell me the dimensions (in mm) of the square shaft where the motor mounts connect to the trucks? I need to know for my DIY i'm building. I've tried contacting Flipsky but they do not respond. Thank you so much!
sure their trucks look cool but frankly I hate the 10 mm bearings with a passion and would rather use trampas 14 fifties for some good quality long rkp trucks
@@KAMiJUINs I emailed them and asked. Will see what they say. Could also use a 10* or 15* angled wedge riser on the rear as long as it doesn't add much height to the board. If the trucks were tilted back 10* do you think the motors would be too low?
It was a DIY project that spent a lot of time on various issues from the start. And that's how it ended up. The parts used were supported by Flipsky.- flipsky.net/
Please check the description box below for parts information and other information.
시작부터 여러가지 문제들로 정말 많은 시간이 소비된 DIY프로젝트였습니다. 그리고 결국 이렇게 완성되었습니다. 사용된 부품들은 플립스카이로부터 지원받았습니다. flipsky.net/ 제품정보 및 기타정보는 더보기란을 확인해주세요.
what are the issues you've encountered with this build? After watching your videos , i decided to make my own diy build , but it failed because of the poor vesc controller and one of the motors i bought from flipsky.
I planned to make it with materials and structures that I used for the first time. And I don't have a lot of knowledge about this... That's why
Definitely worth the wait!…. Yr craftsmanship is getting better n better!! Awesome
I also think I'm getting better as I do more and more~ lol :)
Thank you for watching
oh wow, what a work of art !!!
Thank you for watching~ :)
I don't think you give yourself enough credit. I love the look of it. You should add clear grip spray to the top of the deck. I love the look of this more then most boards out there. I have the BoundFlash board thanks to your video, but I prefer wood decks myself. Looks classy :D. Great work. Keep it up. Looking forward to the ride.
Thank you for watching and for your comment :)
Everything is so perfect, thank you for all your efforts. I'm glad to have this opportunity to cooperate, JUNK, you gave us a 120-point answer sheet
Thank you for saying that and coming :)
you are my favorite Esk8 builder. bravissimo
Grazie per avermi visto e detto che ~ :)
⚡ *Bro, those trucks!* 🤩⚡
First one minute my jaw dropped and stayed dropped, I'm a trucks & bushings geek 😂 fascinatin!
I've seen a similar design truck but first time this wide and this much detail and information 👌🏼🤙🏼
Sammy 40T is my favourite esk8 cell 👀 Good value,reliable.
Your craftsmanship is insane! I can't even cut a piece of paper straight 😂😭
Dude, you are a master of arts.
I'm lookin forward to hearin/seein how the board feels like to ride with those trucks!
I am also curious about the performance of the truck. I'm planning to try riding tomorrow.
This build was really difficult because the plan was modified several times and unexpected problems occurred.
But looking at your compliment, I think it ended well HaHa :)
Thank you, Bro as always~
@@KAMiJUINs your determination to try again and stayin positive is inspirin 🤙🏼
Bravo 🎉🍾 what a nice job 👍
Thank you for watching my videos for a long time ~ :)
VESC cooling, thats we like to see, and respect for having a win7 pc
VESCtool is one of the reasons I can't throw away my Windows PC, lol
Thanks :)
I've always wondered about those additional bushings. I bet they'd help more for one side. The side pressure goes on more than the other side. I like this. Also, it looks like it'll absorb bumps more if mounted the other way. Perhaps it steers more responsive?
The metal extensions past the deck look awesome! They contrast the wood well
Still killing it KAMi ❤🎉 another one bites the dust! Great build
Thank you for watching for a long time~ :)
Always so good dude.
Thank you for watching as always~ :)
Very impressive Outcome Brotha. Can't wait to see the ride.
Thank you, bro!!! as always~ :)
Great work !!
Awesome DIY Kami! Looking forward to all future vidz.
Thank you so much~ :)
You are the best !!!!😮😮
Thank you for watching as always :)
soo relaxing! and informative!! I really enjoy watching your videos!
Thank you for watching :)
I have been waiting for this one, love your videos!!
Thank you so much for waiting~ :)
excellent build as always bruv ! you've given me some great ideas as i'm currently building my own to zip around NYC.
That's awesome~ :) and thank you for watching!
Amazing Design! Well done like always bro.
Ciao~ Brother :)
Thank you so much as always!
Nice work 👏 👌
Thanks Bro~ :)
Nice build man. I have something similar in the works but it's smaller bar stock twin backbone leaf suspension
I'm curious about yours, I want to see it if I have a chance.
Thank you for watching :)
@@KAMiJUINs I will snap a picture once I'm home. It's naked before the aramid carbon apoxy goes on but the pic will show the core of the board
What do you think about the Traveler Board?
Well, I don't know because I haven't experienced it, but I think it's a good option for riders who need portability
Awesome build! Curious about the weight and looking to build my own where did you find the battery pack?
The battery pack uses the old one and the board weighs 18 kilograms
really beautiful build, maybe you best.
I'm Not the best HaHa :) But Thank you so much~
Good job bro 😊👍
Thank you for watching as always~ bro :)
Oh oh I think those wheels are mounted backwards. The true threads path should promote the water channeling from the inside outwards and away.
Okay ~ Thanks!!!
OMG those trucks look amazing! I must have them!!! Do they give a discount of I use your affiliate link!?! Thanks and great job btw!
Thank you for watching :)
you can use this link or code
flipsky.net/?ref=1YlhIf8gYqCQ
code : KAMI
Kami I desperately need your help! Can you tell me the dimensions (in mm) of the square shaft where the motor mounts connect to the trucks? I need to know for my DIY i'm building. I've tried contacting Flipsky but they do not respond. Thank you so much!
Beautiful.
Thank you for watching :)
How do you charge your battery? with DC or balancer?
two DC charger ( Two 10s3p battery packs, each equipped with a BMS, are connected in parallel.)
주행리뷰도 빨리 보고싶네요~~
빠르면 내일정도 될것같아요~
Does the deck is shaped like a coffin because of Halloween?
If not, take care - board looks evil to me! 😈
HaHa ~ In fact, I had a similar thought to you after completion.
Thanks :)
트럭이 길어지면 단점이 뭔가요?
아무래도 중심축으로부터 바퀴까지의 거리가 멀어지기때문에 트럭의 조향 반응 속도가 떨어집니다.
아하감사합니다
sure their trucks look cool but frankly I hate the 10 mm bearings with a passion and would rather use trampas 14 fifties for some good quality long rkp trucks
Top🔝
Thank you for watching :)
If they make 35* rear truck ill buy them
Who knows? Let's waiting for ~ !!!
@@KAMiJUINs I emailed them and asked. Will see what they say. Could also use a 10* or 15* angled wedge riser on the rear as long as it doesn't add much height to the board. If the trucks were tilted back 10* do you think the motors would be too low?
오 장인의 손길이 !
방구석 장인입니다 ㅋ
항상 시청 감사해요 준희님 :)
👍🏽👍🏽👍🏽
Thank you~ :)
PЯӨMӨƧM