I got an 2 yr mechatronics degree and then got an computer engineering degree about 2 yrs ago. I've been in the field maybe 13 yrs now with my background being HVAC controls. I now work for a top 5 company and they mainly use vendors for the plc install/configuration. But im responsible for the network/switch configurations , workstation/server setup, programming changes when the warranty runs out as I understand what the controls need to function and communicate.There are many avenues you can go in this field with different backgrounds.
Thanks very much for sharing some valuable insights. I hope you enjoyed watching our videos and we hope that you will continue posting comments on our content that would greatly help in our advocacy aimed at improving the automation and robotics industry.
@@Angel-je3bh Computer Science can get you a job in controls. You'll have a deeper understanding of the software side of things and pick it up more quickly. The mechanical aspects or electrical can be learned as you go. A lot of jobs now for controls especially for data centers and integrators when you read the degree qualifications has a computer science degree listed as applicable.
Hey I am trying to finish my degree but put it on hold temporarily. I am an HVAC technician working with chillers and commercial applications and what not. I go to school online, I was taking IT but switched to a business degree but now thinking I regret this decision as if I went with the IT degree it could help me out in my HVAC career more down the road as one day I would like to end up in controls for HVAC. Should I stick it out with business degree or switch to IT? I liked the IT degree courses more because they are technical problems and this carries over to HVAC too if you think about it. Both are about troubleshooting and require some of mechanical/computer knowledge. I was once passed over a job for Industrial controls for hvac because the other guy had an IT degree and HVAC certificate and his EPA ofcourse. I had my trade certificate and EPA certification but that evidently was not enough.
There are pros and cons to both the masters vs the associates and bachelors. I'm a 23 year old manufacturing engineering technician-automation apprentice in Canada. Higher skilled trades up here usually require a few years in an apprenticeship before one can become certified, on top of that is the schooling needed which is usually a couple years. That's about 6 years to become certified in a trade. Also, the bachelors would take about 4 years and it would be a lot more challenging than the associates schooling. This would take 10 years to achieve and in my opinion one would make the other obsolete. You'll either be on the floor getting covered in grease or behind a desk doing CAD The masters degree would take about 6 years, the same amount of time one would become certified. One would have plenty of real world experience as well as money saved up and no debt. The masters may have more opportunities and can easily clear $100,000 a year but it may be hard for the average Joe to get a masters, also tradesmen up here in some big companies make more a year than engineers (as long as they're working overtime) All in all I think getting an associates and being a jack of all trades (industrial mechanic) is your best bet, this will help you get in the door in small/big manufacturing plants which companies need (this generation is scared to get dirty). There are plenty of online courses you can do to learn how to program PLC's and different simulators for robotic/ automation systems but you can never work on machines from home. Get associates, then pursue higher education, you'll also have a plan B if you drop out of university.
Thank you for your valuable input. I think this is super useful insight. In the US it is not near as strict and the only certifications we get are from schools, or companies that provide certs. Someone's area and where they may desire to work may play a big roll in the proper direction as well.
My college University of Houston Downtown has a Controls and Instrumentation Engineering degree. Also there is a PE license for Control Systems Engineers.
A local factory was willing to take me and train me with just an HVAC course and having taken afew IT classes for an apprenticeship. In a way I wish I took it and still thinking of taking an Electrical mechnical course... It was a factory I use to work for too. Currently I work with chillers and cooling towers. I am an industrial hvac mechanic but would like to jump into controls or go the automation route one day. I took electrical mechnaical in high school and was pretty good at it. I remember enjoying it for some reason. I do like how in HVAC and Electrical mechanical that wiring diagrams look similar, at least when it comes to motors and sensors... I think if you could learn one of them then you can learn the other trade as they have similarities to them. There is alot of automation in both.
Got a 2 year Controls degree at at tech college. Graduated with honors and was hired at an engineering firm right out of school. Been there almost 16 years now with a senior position in the company.
I have been doing this for almost ten years myself, I came from an IT background for ten years before that. Starting out a degree can be helpful but as said in the video work ethic is most important and also willing to put in long hours. To be real you are taking 80+ hour weeks sometimes months on end. That is the work ethic being talked about. As far as working for the automakers in the USA having 2-5 years experience is the same as having a degree just more hoops to go through. Then when inside the company it’s much much harder to move up the ladder with out a degree. All not impossible but very hard.
I'm currently pursuing an Electrical Power and Controls associate degree. Definitely thinking about seeing how my credits can transfer to a university so I can get my bachelor's in mechatronics or something similar.
Thanks for your video, I am going to Finland to study automation engineering at Seinäjoki University of Applied Sciences, looking forward to a new journey!📖😎
A bit late but just finished my mechanical engineering degree and about to start my masters in controls and automation engineering. I think most controls specific degrees tends to just be at a masters level from what i've seen.
The school I’m actually doing my mechanical engineering degree offers a degree called Automated production engineering. It’s a good mix of programming, electrical and mechanical skills applied to automated manufacturing. The school is École de Technologie Supérieur (ÉTS) in Montréal, Canada.
Would you recommend the mechatronics program at Ivy Tech? Wondering what salary one can expect after graduation and what the work life balance is? You mentioned it in one of your previous videos. I'm currently an HVAC tech so I already have a understanding of mechanical and electrical, but looking for different avenues that are easier on the body, also a career that gets me off roofs, sweating in the summer and freezing in the winter.
Mechatronics is a good one. It's one of my degrees. I can't say you'll be out of the heat or cold though. Alot of customers don't have good climate control. But at least you'd be sitting mainly, if you are a programmer. Or for robot up some while doing some of the programming. Could also do electrical things but the money is really in the programming.
As someone young (21) who has worked in the automation field going on 3 years now, I'm trying to find a way to make the jump to controls. I went through amazon's mechatronics and robotics apprenticeship giving me several certificates, through a community college and the department of learning, in automation (including a certificate for PLC's). I'm currently a senior field service technician traveling around the U.S. upgrading UPS systems. I wonder if I should go for my associates, or just try and learn a bit more on my own time before trying to make the switch to controls. Although I haven't done a whole lot on PLC's themselves, I know the basics and have worked around/with them the last few years. Is there any advice you can give me?
I would directly aim for a position in controls. No need to waste time when you can strat gaining on the job experience. Only thing against that statement is an associate will open more doors to more employers. And it's manly the associate degree milestone more than anything. Some companies will immediately disqualify if you don't have an associates degree.
Great content. I'd like to know what you think of the Bachelor in instrumentation engineering program of Oklahoma State University Institute of Technology.
Instrumentation is definitely a great route to go. May not be the 100% best for automation by itself. And I can’t really speak on their program I’d have to go check it out in person to really know for sure.
I might have a very good idea for your idea of wanting to start your own school or college on the subject . I think it would also make you company grow exponentially over the course of you implementing this idea 💡
I guess there is an Australian college provides a specialised degree in Industrial Automation Engineering, called "Engineering Institute of Technology"!
I completed a CNC Apprenticeship program through my employer, and was told by the training center I could transfer those credits to a advanced manufacturing associates degree. The community college won't accept the credits because there less credit hours than the full courses. I think 3 hours instead of 6. So, a automation apprenticeship program was recommended to by HR at my work. Maybe both CNC machining and the automation program will help me stand out?
They will always help. And yes you always have to check if credits will be accepted by the school. Even college to college credits are not accepted in a lot of cases.
I would not go the automotive route. Top out is not near as good. Maybe aviation but I think manufacturing is the best career choice. You can work pretty much any where in the country and make really good money. Most areas start out at 27+/hr
Hi, to enhance your career in control engineering after completing a Level 3 City and Guilds Electrical and Electronics Engineering, consider obtaining the following certifications: 1. Certified Control Systems Engineer (CCSE) 2. Certified Automation Professional (CAP) 3. Professional Engineer (PE) 4. Certified Industrial Technologist (CIT) 5. Vendor-Specific Certifications
I have a 4 year computer science degree specialised in robotics and i will be getting a 2 year masters engineering degree in robotics…will i have a chance at the automation industry? And what are some of the certifications I could take as a complete beginner in automation that could potentially open my career path in automation?
hi bro, yes, with a 4-year computer science degree specializing in robotics and a 2-year master's degree in engineering in robotics, you have a strong foundation for a career in the automation industry. Your expertise in robotics and engineering will be highly valuable in this field. Here are some certifications that could enhance your career prospects in automation: Certified Automation Professional (CAP) Certified Industrial Automation Systems (CIAS) Robotics-Specific Certifications: Certified Robotics Engineer (CRE) Certified Robotics Technician (CRT) Programming and Software Certifications: Certified Automation Programmer (CAP) Certified Industrial Ethernet Specialist (CIES) Additional Certifications: Certified Safety Professional (CSP) Certified Quality Engineer (CQE)
Should I choose mechatronics or electrical engineer for my bachelor since the mechatronics' courses have the PLC program and the electrical engineer's courses don't have it. The special thing is that in the electrical engineer programs they have the speciality in automatic control systems but they don't have the PLC program :
I would go with mechatronics probably but I would also see if you can use electives of one degree towards the other specific courses. You may only need a couple semesters extra to have both degrees
So I'm going to back to community college but I want to know if general studies degree with a mechatronic certificate worth it? Or Should I go to just a mechatronic certificate for a year and get a job?
I would always try to get a relative job while in study if possible. It's part of the reason I have came so far so fast. I got 4yrs of schooling and 4 yrs on the job experience simultaneously. The degree will open up more opportunities because some corporate companies require some degree.
Yes, there are many Master's programs in automation that would be a great fit for someone with a background in computer science and machining. Your combination of skills would make you a strong candidate for many of these programs. Here are some specific areas of automation that might interest you, and some potential Master's programs to consider: 1. Robotics and Automation: Focus: Designing, programming, and implementing robotic systems for various applications, including manufacturing, healthcare, and logistics. Potential Programs: Robotics Engineering Mechatronics Engineering Automation and Control Systems Engineering 2. Industrial Automation: Focus: Automating industrial processes, such as manufacturing, assembly, and packaging. Potential Programs: Industrial Automation Engineering Manufacturing Engineering Systems Engineering 3. Computer-Aided Design and Manufacturing (CAD/CAM): Focus: Using computer software to design and manufacture products. Potential Programs: Mechanical Engineering with a CAD/CAM specialization Computer-Aided Design and Manufacturing
is a master's in automation and PLC programming worth it? I'm not sure about this degree since it is so specific degree an a field that doesn't have much theory in it so I don't know if this one is that valuable or a master in electrical or electronics would be more valuable as a master's degree
You would really have to look at what the exact courses have within them because that will be the actual difference between the degrees. Some degrees can have separate titles but be almost the exact same degree and some degrees may have the exact same name but have quite a different curriculum structure.
@@EliteAutomation there are many plc programming courses like general automation, advance plc programming, security, networking, supervision and maintenance (with plc ). some industrial power electronics, controls and sensors I just feel it's too much plc programming (more then enough) and not enough theory for engineering program thank you for the answer
My local college has a program for manufacturing automation with areas in electrical and motor theory, mechanical systems, logic controllers and other such subjects would you recommend this type of program to enter the automation industry as an automation engineer.
Yes that sounds like the perfect type of degree to get into automation. The one thing to keep in mind is if it's not an actual engineering degree than there will be some limitations.
That's definitely a really good option. It's one of the best, quickest degrees to get with the highest pay. Not quite engineering rate unless it's actually an engineering degree.
I definitely agree. You may be limited to the places that will employee you but if there are a lot of manufacturers in the area you can find a place that doesn't care about the degree.
@EliteAutomation I will say that it shouldn't be just something that is pursued without a degree if you don't already have the foundation of years in the field. In my case, it became the only thing I couldn't control in my facility, and it was the logical next step.
I got an 2 yr mechatronics degree and then got an computer engineering degree about 2 yrs ago. I've been in the field maybe 13 yrs now with my background being HVAC controls. I now work for a top 5 company and they mainly use vendors for the plc install/configuration. But im responsible for the network/switch configurations , workstation/server setup, programming changes when the warranty runs out as I understand what the controls need to function and communicate.There are many avenues you can go in this field with different backgrounds.
Thanks very much for sharing some valuable insights. I hope you enjoyed watching our videos and we hope that you will continue posting comments on our content that would greatly help in our advocacy aimed at improving the automation and robotics industry.
@@EliteAutomation It's all about spreading knowledge through the Automation Controls community. Your videos are top notch and spot on.
I wonder if pursuing a computer science degree and supplementing the learning with other resources would also qualify someone to get into controls.
@@Angel-je3bh Computer Science can get you a job in controls. You'll have a deeper understanding of the software side of things and pick it up more quickly. The mechanical aspects or electrical can be learned as you go. A lot of jobs now for controls especially for data centers and integrators when you read the degree qualifications has a computer science degree listed as applicable.
Hey I am trying to finish my degree but put it on hold temporarily. I am an HVAC technician working with chillers and commercial applications and what not. I go to school online, I was taking IT but switched to a business degree but now thinking I regret this decision as if I went with the IT degree it could help me out in my HVAC career more down the road as one day I would like to end up in controls for HVAC. Should I stick it out with business degree or switch to IT? I liked the IT degree courses more because they are technical problems and this carries over to HVAC too if you think about it. Both are about troubleshooting and require some of mechanical/computer knowledge. I was once passed over a job for Industrial controls for hvac because the other guy had an IT degree and HVAC certificate and his EPA ofcourse. I had my trade certificate and EPA certification but that evidently was not enough.
There are pros and cons to both the masters vs the associates and bachelors. I'm a 23 year old manufacturing engineering technician-automation apprentice in Canada. Higher skilled trades up here usually require a few years in an apprenticeship before one can become certified, on top of that is the schooling needed which is usually a couple years. That's about 6 years to become certified in a trade. Also, the bachelors would take about 4 years and it would be a lot more challenging than the associates schooling. This would take 10 years to achieve and in my opinion one would make the other obsolete. You'll either be on the floor getting covered in grease or behind a desk doing CAD
The masters degree would take about 6 years, the same amount of time one would become certified. One would have plenty of real world experience as well as money saved up and no debt. The masters may have more opportunities and can easily clear $100,000 a year but it may be hard for the average Joe to get a masters, also tradesmen up here in some big companies make more a year than engineers (as long as they're working overtime)
All in all I think getting an associates and being a jack of all trades (industrial mechanic) is your best bet, this will help you get in the door in small/big manufacturing plants which companies need (this generation is scared to get dirty). There are plenty of online courses you can do to learn how to program PLC's and different simulators for robotic/ automation systems but you can never work on machines from home. Get associates, then pursue higher education, you'll also have a plan B if you drop out of university.
Thank you for your valuable input. I think this is super useful insight. In the US it is not near as strict and the only certifications we get are from schools, or companies that provide certs. Someone's area and where they may desire to work may play a big roll in the proper direction as well.
Bro what is that novel of a job title 😭
Manufacturing engineering technician automation apprentice holy 🐮!
My college University of Houston Downtown has a Controls and Instrumentation Engineering degree. Also there is a PE license for Control Systems Engineers.
Awesome! Thank you for sharing this. There are definitely starting to become more colleges that offer an automation related engineering degree.
A local factory was willing to take me and train me with just an HVAC course and having taken afew IT classes for an apprenticeship. In a way I wish I took it and still thinking of taking an Electrical mechnical course... It was a factory I use to work for too. Currently I work with chillers and cooling towers. I am an industrial hvac mechanic but would like to jump into controls or go the automation route one day. I took electrical mechnaical in high school and was pretty good at it. I remember enjoying it for some reason. I do like how in HVAC and Electrical mechanical that wiring diagrams look similar, at least when it comes to motors and sensors... I think if you could learn one of them then you can learn the other trade as they have similarities to them. There is alot of automation in both.
Yes, you're right.
Got a 2 year Controls degree at at tech college. Graduated with honors and was hired at an engineering firm right out of school. Been there almost 16 years now with a senior position in the company.
Congratulations Sir! That's an awesome testimonial. I really appreciate you sharing this. Maybe it'll inspire the next guy!
My community college (Bakersfield) has a specific automation program. Works directly with local employers to tailor to their needs.
Wow, that's awesome!
Hey, was wondering which college, interested in this. Thank you.
I have been doing this for almost ten years myself, I came from an IT background for ten years before that. Starting out a degree can be helpful but as said in the video work ethic is most important and also willing to put in long hours. To be real you are taking 80+ hour weeks sometimes months on end. That is the work ethic being talked about. As far as working for the automakers in the USA having 2-5 years experience is the same as having a degree just more hoops to go through. Then when inside the company it’s much much harder to move up the ladder with out a degree. All not impossible but very hard.
Hard work definitely is the number factor however like you said no having the degree definitely closes some doors.
I'm currently pursuing an Electrical Power and Controls associate degree. Definitely thinking about seeing how my credits can transfer to a university so I can get my bachelor's in mechatronics or something similar.
Very smart. Look into it sooner than latter! Every semester is one more to work towards that future.
Thanks for your video, I am going to Finland to study automation engineering at Seinäjoki University of Applied Sciences, looking forward to a new journey!📖😎
Congratulations man! I hope you enjoy it and learn a ton. I appreciate your support!
A bit late but just finished my mechanical engineering degree and about to start my masters in controls and automation engineering. I think most controls specific degrees tends to just be at a masters level from what i've seen.
thanks for sharing your insights. more power to your career!
The school I’m actually doing my mechanical engineering degree offers a degree called Automated production engineering. It’s a good mix of programming, electrical and mechanical skills applied to automated manufacturing. The school is École de Technologie Supérieur (ÉTS) in Montréal, Canada.
That sounds like a great program! Where is it located?
It’s located in Montreal, Canada. École de technologie supérieure is the school’s name.
Would you recommend the mechatronics program at Ivy Tech? Wondering what salary one can expect after graduation and what the work life balance is? You mentioned it in one of your previous videos. I'm currently an HVAC tech so I already have a understanding of mechanical and electrical, but looking for different avenues that are easier on the body, also a career that gets me off roofs, sweating in the summer and freezing in the winter.
Mechatronics is a good one. It's one of my degrees. I can't say you'll be out of the heat or cold though. Alot of customers don't have good climate control. But at least you'd be sitting mainly, if you are a programmer. Or for robot up some while doing some of the programming. Could also do electrical things but the money is really in the programming.
Lanier tech in GA has a BAS program but, I have yet to enroll into classes for myself.
that's nice to hear. the automation industry needs people like you!
As someone young (21) who has worked in the automation field going on 3 years now, I'm trying to find a way to make the jump to controls. I went through amazon's mechatronics and robotics apprenticeship giving me several certificates, through a community college and the department of learning, in automation (including a certificate for PLC's). I'm currently a senior field service technician traveling around the U.S. upgrading UPS systems. I wonder if I should go for my associates, or just try and learn a bit more on my own time before trying to make the switch to controls. Although I haven't done a whole lot on PLC's themselves, I know the basics and have worked around/with them the last few years. Is there any advice you can give me?
I would directly aim for a position in controls. No need to waste time when you can strat gaining on the job experience. Only thing against that statement is an associate will open more doors to more employers. And it's manly the associate degree milestone more than anything. Some companies will immediately disqualify if you don't have an associates degree.
Can taking Mechatronics major in Robotics help me become an Automation Engineer?
Yes absolutely! One of the best ways.
Great content. I'd like to know what you think of the Bachelor in instrumentation engineering program of Oklahoma State University Institute of Technology.
Instrumentation is definitely a great route to go. May not be the 100% best for automation by itself. And I can’t really speak on their program I’d have to go check it out in person to really know for sure.
Dunwoody college and technology has a controls and automation has a 2 & 4 year program
Oh nice. Thank you for sharing that with us and everyone.
I might have a very good idea for your idea of wanting to start your own school or college on the subject . I think it would also make you company grow exponentially over the course of you implementing this idea 💡
Seems interesting. Not sure as of now though.
I guess there is an Australian college provides a specialised degree in Industrial Automation Engineering, called "Engineering Institute of Technology"!
There are definitely more colleges starting to adapt to this.
Which direction should someone go if they want to get into Automation in Construction
This is a somewhat new sector for automation. There are some things beginning deployed but it hasn't fully taken off just yet.
I completed a CNC Apprenticeship program through my employer, and was told by the training center I could transfer those credits to a advanced manufacturing associates degree. The community college won't accept the credits because there less credit hours than the full courses. I think 3 hours instead of 6. So, a automation apprenticeship program was recommended to by HR at my work. Maybe both CNC machining and the automation program will help me stand out?
They will always help. And yes you always have to check if credits will be accepted by the school. Even college to college credits are not accepted in a lot of cases.
I just enrolled in my community college and looking to go into industrial and manufacturing or automotive maybe even aviation
I would not go the automotive route. Top out is not near as good. Maybe aviation but I think manufacturing is the best career choice. You can work pretty much any where in the country and make really good money. Most areas start out at 27+/hr
@@EliteAutomation I think you maybe right! Manufacturing and industrial are just booming industry I'm just trying to go where the opportunities are
@@AimlifestyleX Manufacturing is 101% the place to go. Programming is in the most demand, has the most opertunity and pay
@@EliteAutomation Thanks I'm definitely excited to come into the field and make my mark 🤙
ISA certified control engineering and technicians. experience or school is accepted CAP certification is the goal for those engineers.
Thank you for sharing!
I enrolled for a level 3 City and Guilds Electrical and Electronics Engineering. What certification is best for me to get into control eng
Hi, to enhance your career in control engineering after completing a Level 3 City and Guilds Electrical and Electronics Engineering, consider obtaining the following certifications:
1. Certified Control Systems Engineer (CCSE)
2. Certified Automation Professional (CAP)
3. Professional Engineer (PE)
4. Certified Industrial Technologist (CIT)
5. Vendor-Specific Certifications
So cs(robotics major) can work at automation
Ya they can!
I have a 4 year computer science degree specialised in robotics and i will be getting a 2 year masters engineering degree in robotics…will i have a chance at the automation industry? And what are some of the certifications I could take as a complete beginner in automation that could potentially open my career path in automation?
hi bro, yes, with a 4-year computer science degree specializing in robotics and a 2-year master's degree in engineering in robotics, you have a strong foundation for a career in the automation industry. Your expertise in robotics and engineering will be highly valuable in this field.
Here are some certifications that could enhance your career prospects in automation:
Certified Automation Professional (CAP)
Certified Industrial Automation Systems (CIAS)
Robotics-Specific Certifications:
Certified Robotics Engineer (CRE)
Certified Robotics Technician (CRT)
Programming and Software Certifications:
Certified Automation Programmer (CAP)
Certified Industrial Ethernet Specialist (CIES)
Additional Certifications:
Certified Safety Professional (CSP)
Certified Quality Engineer (CQE)
What do you think of a masters degree in Manufacturing Systems Engineering in general and also for the industrial automation industry?
It sounds like a good degree but it's really hard to say without seeing what's in it.
Should I choose mechatronics or electrical engineer for my bachelor since the mechatronics' courses have the PLC program and the electrical engineer's courses don't have it. The special thing is that in the electrical engineer programs they have the speciality in automatic control systems but they don't have the PLC program :
I would go with mechatronics probably but I would also see if you can use electives of one degree towards the other specific courses. You may only need a couple semesters extra to have both degrees
So I'm going to back to community college but I want to know if general studies degree with a mechatronic certificate worth it? Or Should I go to just a mechatronic certificate for a year and get a job?
I would always try to get a relative job while in study if possible. It's part of the reason I have came so far so fast. I got 4yrs of schooling and 4 yrs on the job experience simultaneously. The degree will open up more opportunities because some corporate companies require some degree.
Amazing content, I took a control systems course in Bangalore, Indian. Sensors and control systems engineering, Ramaiah university
Congratulations.. I'll actually be in Bangalore next month
Can you site me the universitys who study automation in usa ?
Site you? There are a ton of associate programs. Engineering, there are not many at all.
I have a bachelor in computer science, and a background in machining. Are there any masters in automation ?
Yes, there are many Master's programs in automation that would be a great fit for someone with a background in computer science and machining. Your combination of skills would make you a strong candidate for many of these programs.
Here are some specific areas of automation that might interest you, and some potential Master's programs to consider:
1. Robotics and Automation:
Focus: Designing, programming, and implementing robotic systems for various applications, including manufacturing, healthcare, and logistics.
Potential Programs:
Robotics Engineering
Mechatronics Engineering
Automation and Control Systems Engineering
2. Industrial Automation:
Focus: Automating industrial processes, such as manufacturing, assembly, and packaging.
Potential Programs:
Industrial Automation Engineering
Manufacturing Engineering
Systems Engineering
3. Computer-Aided Design and Manufacturing (CAD/CAM):
Focus: Using computer software to design and manufacture products.
Potential Programs:
Mechanical Engineering with a CAD/CAM specialization
Computer-Aided Design and Manufacturing
@ thank you so much 🙏🏽
is a master's in automation and PLC programming worth it?
I'm not sure about this degree since it is so specific degree an a field that doesn't have much theory in it so I don't know if this one is that valuable or a master in electrical or electronics would be more valuable as a master's degree
Yes I think it's worth it. Automation has one of the most broad career paths. You can go so many different directions with an automation degree.
You would really have to look at what the exact courses have within them because that will be the actual difference between the degrees. Some degrees can have separate titles but be almost the exact same degree and some degrees may have the exact same name but have quite a different curriculum structure.
@@EliteAutomation there are many plc programming courses like general automation, advance plc programming, security, networking, supervision and maintenance (with plc ). some industrial power electronics, controls and sensors
I just feel it's too much plc programming (more then enough) and not enough theory for engineering program
thank you for the answer
Istanbul Techicanl University has Controls and automation engineering degree and alumnis are very looked after colleagues in the job market!
Those are hard degrees to come by and you are right the industry is hungry for those types of positions.
My local college has a program for manufacturing automation with areas in electrical and motor theory, mechanical systems, logic controllers and other such subjects would you recommend this type of program to enter the automation industry as an automation engineer.
Yes that sounds like the perfect type of degree to get into automation. The one thing to keep in mind is if it's not an actual engineering degree than there will be some limitations.
Make sure to focus on the direction you want to go.
I'm a new graduater from control engineering
Congratulations!
Hey what about a Mechatronics engineering degree
That's definitely a really good option. It's one of the best, quickest degrees to get with the highest pay. Not quite engineering rate unless it's actually an engineering degree.
Robotics industry Automation.
That's a good one.
What are my chances with a Computer Science degree?
I don't think it's the best unless it has alot of programming background in it.
You don't need a degree if you have electromechanical experience before you begin learning controls engineering.
I definitely agree. You may be limited to the places that will employee you but if there are a lot of manufacturers in the area you can find a place that doesn't care about the degree.
@EliteAutomation I will say that it shouldn't be just something that is pursued without a degree if you don't already have the foundation of years in the field. In my case, it became the only thing I couldn't control in my facility, and it was the logical next step.
Many companies require a degree. I can understand why they wouldn't want to hire people who take shortcuts for an engineering job.
I also emailed you at the email of your website .
We seem to have missed it. Can you please resend it to marketing@eliteautomationusa.com