Hi guys in this one we make a shroud for the BSA R12, in our next video we will make the matching moderator for the rifle. MY Ebay store: www.ebay.co.uk...
When i see what you can achieve with your budget and then see what the big boy's do daystate ,FX ,BSA ,etc do(don't do) it makes me think they don't care that much about there customers once they got their money i am always impressed when i see you workmanship with excellent skills 👍👍👍👍👍
we have done so much experimenting with shrouds / mods over the years and have come to the conclusion that it's not a one size fits all deal, each gun get's different results with different setups whats supper quiet on one gun can be not so good on another 😀
Love the lathe work! We can't have your custom accessory where I live, but the same techniques can be used to make an air gun, or a plain shroud without noise dampening function. Great work! Looks terrific.
Always enjoy your videos, you I'm sure give lots of people food for thought. Wish there was someone near me with similar skills or I had the facilities to get a small lathe. I have a few mods I'd like to do with my old brocock Concepts.
Hi again Jake! Always fascinating watching what you come up with..! Do you ever do work on Steyrs or Anschutz rifles etc? I looked through your video library on this channel, but of course that just displays what you have uploaded so I can't figure out if you think these guns aren't of need of much fettling or whether you've done it without filming them.. 👍
Do you use any kind mechanical carriage stop when you hit your marks (like at 3:10) or do you disengage manually. The playback speed of the videos makes it look like you are lightning fast. It would be cool to see your hands while you work the carriage and slide. You certainly know your stuff and it very educational to watch it happen.. Cheers !!
Hi I would like to ask you an advice regarding a aselkon mx 10. it's my first pcp airgun and after 2 months the needle valve is leaking. I would like to have a new one but no parts available and i don't want to make just a new one but a better one that last more than 2 months. Any advice on the shapes that works. Maybe a mail address to send you pictures of what i've got would make things a lot easier to explain.Thanks.
When i see what you can achieve with your budget and then see what the big boy's do daystate ,FX ,BSA ,etc do(don't do) it makes me think they don't care that much about there customers once they got their money i am always impressed when i see you workmanship with excellent skills 👍👍👍👍👍
thank you very much 😀
Tell ya what better than any tv show! When it ended I was like fk sake 😆👍
😀 thanks mate
I would love to be able to use a lathe. Very skilled and enjoyable to watch 👌👍
i am very lucky to have one it's great to be able to make bits when you want to 👍
Just super brilliant and it's a absolute treat to watch you work ,great work on all the daystate videos ,thanks so much 👍
Thanks, very are very proud of the Daystate vids thanks for watching 😀
is it me, or is this week dragging? I'm waiting to see the mod :-)
😂 thanks for watching
Great vid again. Clever design. Can't wait for next one!
Thank you! Cheers!
Hanging out to see the finished job. 🙂
thanks for watching 😁
Stunning work as ever Jake ,fascinating to watch.
Thanks Martin 😀
Another outstanding job my friend 👍
Thank you! Cheers😀
I am in awe of your skills as usual. Can’t wait for the next instalment. 👍👍
thanks you 😀
Great machine work as usual Jake, looking forward to seeing end result with the mod 👍
thanks Dave 👍
Interesting to see you playing with the designs. Excellent machining as always. look forward to seeing the completion.
we have done so much experimenting with shrouds / mods over the years and have come to the conclusion that it's not a one size fits all deal, each gun get's different results with different setups whats supper quiet on one gun can be not so good on another 😀
That will look great and be better than the standard shroud etc Jeff, more great work Cheers 👌👌👌👌👍👍👍👍👍👍👍
thank you 😀
Love the lathe work! We can't have your custom accessory where I live, but the same techniques can be used to make an air gun, or a plain shroud without noise dampening function. Great work! Looks terrific.
thank you and thanks for watching
Another excellent and unique build (unique for now, until someone pinches your design again 😊) .... Looking forward to part 2 👍
Thanks Lee 😀
Top job as always ideas coming to life excellent skills
Thank you glad you liked it 😀
nice one mate . can’t wait to see the fished product certainly going to make that gun one of a kind 👍
yes i hope it's going to look good 😀
Great video guys, looking forward to see them on the rifle👍🏼
Thanks 👍
Good skills once again
thank you 😀
Lovely work Jake
Thanks mate 👍
Always enjoy your videos, you I'm sure give lots of people food for thought.
Wish there was someone near me with similar skills or I had the facilities to get a small lathe.
I have a few mods I'd like to do with my old brocock Concepts.
thanks for watching and i am glad you like them 😀
Absolutely brilliant jake , can't wait for round two. .
thanks phil 😀
Hi again Jake! Always fascinating watching what you come up with..!
Do you ever do work on Steyrs or Anschutz rifles etc? I looked through your video library on this channel, but of course that just displays what you have uploaded so I can't figure out if you think these guns aren't of need of much fettling or whether you've done it without filming them.. 👍
we have done a couple of vids on the ansuchutz and one on a steyr i think but we do hope to do a set of vids on a steyr in the new year 😀
Amazing work..... As always! 😀
Thank you so much 😀
Blimey 17.3 subscribers 👍
Well done 👍
Thanks, yes the subscribers is fantastic😀
😀 nice to be popular 👍 keep up the good work.👍
Do you use any kind mechanical carriage stop when you hit your marks (like at 3:10) or do you disengage manually. The playback speed of the videos makes it look like you are lightning fast. It would be cool to see your hands while you work the carriage and slide. You certainly know your stuff and it very educational to watch it happen.. Cheers !!
No mechanical stop 👍 i will try to show them in the next bit, thanks for watching
Perfect
thanks for watching 😁
Very nice machining! 👍 Where do you get your lathe tools? I can't seem to find any tools as narrow as the one at 2:57.
We get most of our tooling from cut well they are really good 😁
2airgunners Well I know where I'm getting my lathe tools from now on! 😊
Hi
I would like to ask you an advice regarding a aselkon mx 10. it's my first pcp airgun and after 2 months the needle valve is leaking. I would like to have a new one but no parts available and i don't want to make just a new one but a better one that last more than 2 months. Any advice on the shapes that works. Maybe a mail address to send you pictures of what i've got would make things a lot easier to explain.Thanks.
I guess that is a warco lathe ,what model is it
Yes warco gh1230 they are a good machine for the money😁
🕉
thanks for watching 😁
Can you do ke a shroudnfor my air gun?😢
Talk about leaving us hanging.. Worse then being pulled off Helena Bonham Carter ( yes I'm an old guy)
🤣🤣 thanks for watching
Thật tuyệt vời