Very nice work . 32 clean peak watts on a Bird 43 “ain’t no slouch” . That’s plenty for local talking on a base antenna or to hit a 2 pill and bring it to life . Clean going in , clean going out . Keep up the good work 👍
Man my 66v was stolen from me run it with a 5k Wilson 636 was the mic I was running nice work Raido Grange you just got me as a new Subscriber keep up the great work and thank you for been on UA-cam waven from Southern California 713 Mr.Silk and I'm off the key...
Another nice radio revived. Sounds great. Someone sending you new toys before Christmas? Play away! Bench work slowed down here. Time to go back through my radios. Stay warm. Smilin', I'm off the key. 😑🦗
I have a dx66v with a rx75 on the back but it only does 40 Watts can you possibly squeeze 75 to 80 peak Watts out of it clean signal with a half a watt dead key if so 🤔 please give me a contact information
I got this same radio and needs fixed I crossed wires on it and it blew that protection thing inside ok so then I tried to bypass that protection diode thing and hook it direct and I seen some little thing inside get real hot and start to smoke don't know what I did but it still turns on if I hook it up direct again but again same thing smoke on some thing on the board glows hot and smokes so I just shut it down and was so upset don't know what this is gonna cost but like it fixed again because this radio is bad to the bone! If to much to fix ill just get a Stryker 995 or something thats bad to the bone I need quote whare do I send it .
I have a question. I have a new 2022 International big truck. Galaxy DX55V . Can I hook up a Polamar 250 to the truck with out any problems? Guy at work said no it would screw up my electronics in the truck. True or not true Thanks for your help
It will…I have a 2021 International LT. The electronics in these trucks are trash, have been for 30 years. Have Matt peak and tune it as he did my Galaxy 66 and you are golden!😎😎
@@5194553739 I run a Browning br79 antenna on my slide bar behind the bunk. I also use Times Microwave LMR 400 coax with a Tram hd stud and mount. I don’t have a hi rise sleeper, just the walk in stand up. My set up works great.
Got questions I run a Stryker 447 hooked up to a k 40 antenna I had the antenna set at 1.0 but it keeps jumping around now up to 1.7 it seems when the weather is crapy it goes down when its nice it goes up the other thing is when I plug my phone into the charger I get a bunch of static can you give me advice what to do tired of buying antennas
Very nice work . 32 clean peak watts on a Bird 43 “ain’t no slouch” . That’s plenty for local talking on a base antenna or to hit a 2 pill and bring it to life . Clean going in , clean going out . Keep up the good work 👍
That's right let the box behind the rig do the heavy lifting 👊🇺🇲
Man my 66v was stolen from me run it with a 5k Wilson 636 was the mic I was running nice work Raido Grange you just got me as a new Subscriber keep up the great work and thank you for been on UA-cam waven from Southern California 713 Mr.Silk and I'm off the key...
Another nice radio revived. Sounds great. Someone sending you new toys before Christmas? Play away!
Bench work slowed down here. Time to go back through my radios. Stay warm. Smilin', I'm off the key. 😑🦗
Yep, got a few goodies to review. They are geared towards folks wanting higher quality accessories, antennas, etc. Have a nice weekend, 73
Astec mic worked good on the 99v
Great video.
Always wanted a 99!
Nice radio, Keep up the good work Matt.
I have a dx66v with a rx75 on the back but it only does 40 Watts can you possibly squeeze 75 to 80 peak Watts out of it clean signal with a half a watt dead key if so 🤔 please give me a contact information
Have a nice weekend Matt.....
Thx..u 2..73
Sweet job Matt! 👍🏼
Thank you sir!
Nice job
Hello I have a General lee that needs work. What area are you in sir?
I'm in Pennsylvania. Watch for updates as to when mail-ins will start up again.
👍🏻
I got this same radio and needs fixed I crossed wires on it and it blew that protection thing inside ok so then I tried to bypass that protection diode thing and hook it direct and I seen some little thing inside get real hot and start to smoke don't know what I did but it still turns on if I hook it up direct again but again same thing smoke on some thing on the board glows hot and smokes so I just shut it down and was so upset don't know what this is gonna cost but like it fixed again because this radio is bad to the bone! If to much to fix ill just get a Stryker 995 or something thats bad to the bone I need quote whare do I send it .
I have a question. I have a new 2022 International big truck. Galaxy DX55V . Can I hook up a Polamar 250 to the truck with out any problems? Guy at work said no it would screw up my electronics in the truck. True or not true Thanks for your help
It will…I have a 2021 International LT. The electronics in these trucks are trash, have been for 30 years. Have Matt peak and tune it as he did my Galaxy 66 and you are golden!😎😎
@@christopherbell3768 Would a Francis be a good antenna for the stock mount. What do you use
@@5194553739 I run a Browning br79 antenna on my slide bar behind the bunk. I also use Times Microwave LMR 400 coax with a Tram hd stud and mount. I don’t have a hi rise sleeper, just the walk in stand up. My set up works great.
Got questions I run a Stryker 447 hooked up to a k 40 antenna I had the antenna set at 1.0 but it keeps jumping around now up to 1.7 it seems when the weather is crapy it goes down when its nice it goes up the other thing is when I plug my phone into the charger I get a bunch of static can you give me advice what to do tired of buying antennas
That’s weird…what kind of truck are you running?
@@christopherbell3768 2015 kw
@@bradleywilkerson8497 What model?
@@christopherbell3768 not sure it's not the 680
I was trying to figure out a way to send you a picture
Average power I didn't see
Josh he did not show average watts I don't know why