That's just an issue from worn out valve cover gasket, specifically the spark plug tube o rings which are part of the valve cover gasket set. Always remove the oil from the tube BEFORE removing the spark plug so that you don't get oil drip down to the top of the piston. As far as the spark plug goes, the ones the put in their are the upgraded version, same heat range, but that was the laser cut version, costs more than the regular iridium but the laser cut version is slightly more efficient. No catastrophic issue here. Valve cover gasket set runs about $15 bucks, and 1 hour install time max. Probably change the PCV valve at the same time or at least check and clean it.
@@wesfields9322 if everything goes perfectly it can be 20 minutes but for someome that has never done it before it can and many times does take longer than that. Especially if they run in to some issues during the process.
@@23soccerFTW14 Yup worn out spark plug tube o-rings. First get all of the oil out of the spark plug tube. You can use a turkey baster for that or an automotive fuel/oil extractor. Once all of the oil is removed you are then good to take out the spark plugs, remove the entire valve cover and install a new valve cover gasket kit.
Bad valve cover gasket causes this issue the gasket is aligned around the spark plugs when the gasket is damaged it seeps oil into the spark plug chamber easy fix and inexpensive clean out oil from spark plug chambers replace gasket tighten down valve cover bolts in sequence and torque to spec replace correct spark plugs and good to go
@@Viper-sn5cx yep eaither valve cover gasket and or valve cover o ring. Your can look and see if the o ring is flush with the spark plug tube. To clean the oil out use a rag and skinny extension and blot it out till it's dry..
I agree with couple of people probably just spark plugs gaskets leaking. Blow out the oil and replace spark plug gasket. It happened on my car. You just remove the valve cover and replace spark plug gasket.
I would hardly call a leaking valve cover gasket catastrophic, no big deal at all. Same thing with wrong sparkplugs, Japanese engines are very robust and as long as it runs well no issue at all.
@michael konstantinovich bordwell I work on motorcycles and when the Honda CBR 1000R first came out the factory spark plugs were dual electrode NGK (sorry forget the exact part#) that cost $67 EACH from the dealer. Guess who bought them? Nobody... As long as they are in the same heat range and have the correct reach they will work just peachy. You might be replacing them a lot more often and coils as well but the engine will run just fine with them. This gentleman who made the video makes it appear a leaking valve cover gasket wrecked the motor.
What if I got some oil down a spark plug? I thought I got all of it out but some went down the spark plug so now it still runs like poop.. smoked for a little but seen that is normal … stopped smoking the light blue mush but still runs bad…?!
Cool video...just got a question. Is it better to clean the oil out of the spark plug well before removing the spark plug so the oil doesn't drain into the opening?
how did you clean the oil under the spark plug? I took out my spark plug and it seems like the oil is burned there and how should I clean it? any suggestion
I have a question to ask you. I have a 2008 Audi A4 quattro convertible 2.0. I for some stupid reason put to much oil because on the engine dipstick said it needed or stupid me didn't see well the oil reading on the dipstick anyways I had an overfilling of oil and didn't know till I see alot of white smoke coming out of my tailpipes. I took it to the mechanic and he told me it was overfilled with oil and that was the reason why white smoke was coming out. Just like you found oil on the coils and spark plugs I decided to check one of my coils and I found some oil on the bottom. I didn't remove the spark plug to see. The oil found can it be because of the previous over flow of oil? I want to change my spark plugs and coils. I have everything to do it but the little oil found on the bottom of the coil kinda stop me from putting new spark plugs and coils. Can I try to remove the remaining oil left with a rag? Can I still install the spark plugs and coils? I really wanted to do this tune up.
What if I got some oil down a spark plug? I thought I got all of it out but some went down the spark plug so now it still runs like poop.. smoked for a little but seen that is normal … stopped smoking the light blue mush but still runs bad…?!
Hello and good day. It sounds like your stressing the point how important spark plugs are. If they are not properly gapped can they cause engine vibration and surging?
Awesome will u be my mechanic I totally trust u that's soo hard to find nobody cares anymore thank you you good man what state u live or work my car needs help same problem
If you just pull the plug, oil will drain into the cylinder. Be sure to cover the plug holes to prevent oil splatter, spin the engine over a few times before installing the plugs or you'll break a piston or rod.
Any chance you can elaborate? I have a jeep that had the same problem. it was too late before realizing the oil had dripped down after removing he plug. What happens?
@@charr4689 before I took out the plugs, I soaked it down with brake cleaner n took a piece of cost hunger and tried to pull out oil BEFORE taking plugs out. I never heard of breaking stuff but if it filled a piston full enough if might thrash something...
Great video and content. I have been a fan since you first moved into your shop. I think you would love my 1997 Toyota 4Runner with 268000 miles, everything original. I would be honored to have you work on my car. You could use it for your videos. I'm also in California (Long Beach). Please let me know what city your shop is located. You can message me personally if you like...
If oil is leaking from the top of the valve cover, where the coil seal is, why isn't there oil stains down the inside wall of the coil tubes? Is it possible oil is coming from the bottom of the coil tube, where it's attached to the head? Pull all the plugs, then spin the engine over to ensure pistons blow all oil out of the cylinders. Oil is not compressible so if the plug is pulled without removing the oil, and the oil runs into the cylinder, one could be in for a surprise when trying to start the engine.
I brought a 20 years old Toyota Corolla that has 30K original miles original tire as a back up car. I put the car in storage and did not use it much until last year, I found oil leak from valve cover gasket to engine manifold. I don't have $500.00 for this job ($299.00 for replacing spark plug and $300.00 for valve cover gasket job. I pull a spark plug off and it flood with oil on 3 spark plugs and struck PVC valve. I pull a valve cover off and put a new valve cover gasket and new PVC valve and new Denso spark plug. and $12.00 cleaning solution and put everything back. It took me 4 hours as an old man working on the sun at 100 degree temperature. I clean everything. There is no leak. I also replaced a power window regulator two years ago because I don't have 6 weeks waiting time with can not window open and I save $700.00 and risk to have window open for two months,
Hi i replaced the valvecover gasket on my bmw e36 cause i found oil in the plug chambers.i removed the oil from the plug chambers but did not removed the plug .now my car do not wanna start
Today when i driving i start feel that my engine is stutter in full throttle with no power at all and it was scary in up hill when i tried to pass slow truck, of course the check engine light has on . so i drive cautiously in half throttle use to the dealer service and the mechanic say i need new valve cover gasket, also the oil leak damaged the spark plugs, spark plugs coils and spark wire that swapped too.
I had that problem of lack of power up a gentle incline... Fuel injectors MAY be the problem and got new rebuilt ones that are warranted.... about $130 shipped... and I found my symptoms were from an old (and now replaced) intake manifold gasket (leaked air after the MAFS already had measured the air going by it...). An old car will have gaskets fail eventually.... see?
Doug H. in VA That’s the problem with old cars, when something happens with engine you start replace parts until fixing the issue or until you decide take the car to junkyard... I pay for my fix a 300 (US) dollars for issue started in 2017. Car itself worth 1,500 dollars... Last week is the second time it happened to me.
Not all models of spark plugs are referenced on the manual, NGK show the standard spark plug compatible and on their website (PARTS FINDER), they have a recommandation for Iridium Spark plug (for better performances), for my Corolla 2000 4ZZ-FE, on the manual, they do not recommend NGK spark plugs at all, in fact they recommend DENSO K16R-U11 and BOSCH FR8KCU, but when you go on the NGK Parts finder, what do i find? www.ngkntk.com/benelux/part-finder/produktfinder/PKW/ZK_BENZINER/TOYOTA/COROLLA/BKR5EYA-11/14141/ Standard Spark plug : BKR5EYA-11 and "or as an upgrade for even better driving performance : BKR5EIX-11" I am surprised that for these 2 engines references for that car (the car on your video), no iridium spark plugs are recommended.
Great contents...👍 in this case what are you suppose to do in order to stop the oil from flooding inside the spark plug Chamber? At the end of your video l was expecting you to tells us the fix of this particular the problem except from the fact that you mentioned OEM spark plugs at end of your Video!!
Real mechanics look and listen to learn. Never repeat stuff you don’t know is fact. Always DOUBLE CHECK NUMBERS THAT WILL BLOW YOUR MOTOR. OR FRY YOUR ELECTRICAL SYSTEMS .
More than likely the seller wether private or dealer didn't care having sold for a low price, and figured new owner can eat it. Still very shady not to disclose the issue regardless, especially if a dealer.
Yeah mine either. Just stuffed a paper towel in between the spark plug and deep socket until the tension was right and it wiggled free perfectly after I hand tightened it 🤙🏻
Doesn't seem like you do any complex Jobs in your garage only simple fixed from what I have seen on your channel so far. That's not to say you don't provide good advice i.e follow cars manual for specs, carry out maintenance as per manufacturers schedule etc.
I really enjoy your videos and have learned a lot to help with my Corolla. Keep the videos coming!
That's just an issue from worn out valve cover gasket, specifically the spark plug tube o rings which are part of the valve cover gasket set. Always remove the oil from the tube BEFORE removing the spark plug so that you don't get oil drip down to the top of the piston. As far as the spark plug goes, the ones the put in their are the upgraded version, same heat range, but that was the laser cut version, costs more than the regular iridium but the laser cut version is slightly more efficient. No catastrophic issue here. Valve cover gasket set runs about $15 bucks, and 1 hour install time max. Probably change the PCV valve at the same time or at least check and clean it.
Valve gasket covers should take like 20 min
@@wesfields9322 if everything goes perfectly it can be 20 minutes but for someome that has never done it before it can and many times does take longer than that. Especially if they run in to some issues during the process.
What if the spark plug is completely submerged in oil? Like.. more than an oz, couldn’t even see the spark plug full
@@23soccerFTW14 Yup worn out spark plug tube o-rings. First get all of the oil out of the spark plug tube. You can use a turkey baster for that or an automotive fuel/oil extractor. Once all of the oil is removed you are then good to take out the spark plugs, remove the entire valve cover and install a new valve cover gasket kit.
@@JA-rn5qv Do the sparkplugs that got wet need to be taken out and cleaned after the oil is removed from the tubes?
Bad valve cover gasket causes this issue the gasket is aligned around the spark plugs when the gasket is damaged it seeps oil into the spark plug chamber easy fix and inexpensive clean out oil from spark plug chambers replace gasket tighten down valve cover bolts in sequence and torque to spec replace correct spark plugs and good to go
How do you clean out the oil? Can i just remove the valve cover?
@@Viper-sn5cx yep eaither valve cover gasket and or valve cover o ring. Your can look and see if the o ring is flush with the spark plug tube. To clean the oil out use a rag and skinny extension and blot it out till it's dry..
Removing the valve cover won't give you access to inside the spark plug tube. But u can replace the gasket and o rings then it won't leak anymore
Sir brandew gasket but still theres a leak in one of the spark plug..no 2 on the left..
@@alrodriguez6413 u replaced the o ring in the valve cover?
I agree with couple of people probably just spark plugs gaskets leaking. Blow out the oil and replace spark plug gasket. It happened on my car. You just remove the valve cover and replace spark plug gasket.
This car is a gold mine for your videos. Lol!
Nice catch.
Those are just special oil cooled spark plugs.
LOL
I would hardly call a leaking valve cover gasket catastrophic, no big deal at all. Same thing with wrong sparkplugs, Japanese engines are very robust and as long as it runs well no issue at all.
@michael konstantinovich bordwell I work on motorcycles and when the Honda CBR 1000R first came out the factory spark plugs were dual electrode NGK (sorry forget the exact part#) that cost $67 EACH from the dealer. Guess who bought them? Nobody...
As long as they are in the same heat range and have the correct reach they will work just peachy. You might be replacing them a lot more often and coils as well but the engine will run just fine with them.
This gentleman who made the video makes it appear a leaking valve cover gasket wrecked the motor.
What if I got some oil down a spark plug? I thought I got all of it out but some went down the spark plug so now it still runs like poop.. smoked for a little but seen that is normal … stopped smoking the light blue mush but still runs bad…?!
Cool video...just got a question. Is it better to clean the oil out of the spark plug well before removing the spark plug so the oil doesn't drain into the opening?
DO. YOU. SEE. THIS NIGHTMARE?
how did you clean the oil under the spark plug? I took out my spark plug and it seems like the oil is burned there and how should I clean it? any suggestion
I have a question to ask you. I have a 2008 Audi A4 quattro convertible 2.0. I for some stupid reason put to much oil because on the engine dipstick said it needed or stupid me didn't see well the oil reading on the dipstick anyways I had an overfilling of oil and didn't know till I see alot of white smoke coming out of my tailpipes. I took it to the mechanic and he told me it was overfilled with oil and that was the reason why white smoke was coming out. Just like you found oil on the coils and spark plugs I decided to check one of my coils and I found some oil on the bottom. I didn't remove the spark plug to see. The oil found can it be because of the previous over flow of oil? I want to change my spark plugs and coils. I have everything to do it but the little oil found on the bottom of the coil kinda stop me from putting new spark plugs and coils. Can I try to remove the remaining oil left with a rag? Can I still install the spark plugs and coils? I really wanted to do this tune up.
What if I got some oil down a spark plug? I thought I got all of it out but some went down the spark plug so now it still runs like poop.. smoked for a little but seen that is normal … stopped smoking the light blue mush but still runs bad…?!
Ford motor same problem but only has about 96000 miles and has a misfire can it be oil rings or just valve gasket
Thanks for sharing your interesting video.
Those plugs are an acceptable replacement. You don't have to use NGK or Denso's.
My piston on top is really black , maybe burnt oil bc of a leak, is there a way to clean this ?
How much would you charge some one for this process ..my mechanic is charging me 250 ..does that sound right ?
Hello and good day. It sounds like your stressing the point how important spark plugs are. If they are not properly gapped can they cause engine vibration and surging?
This car suffered from a lousy mechanic.
Probably the neighbors 8 year old was working on it:)
Respect
How do you fix that oil problem
How much will it cost?
Awesome will u be my mechanic I totally trust u that's soo hard to find nobody cares anymore thank you you good man what state u live or work my car needs help same problem
!!ohh no!! a TOYOTA....I just wonder if Scott Kilmer pull off the plug out of his computer after this video. LOL
REVVV UP YOUR ENGINES!!
do you get any symptoms for having oil
in your spark plugs ???
Cylinder misfire is one
Probably never changed the oil or air filter until before they sold it.
I know this video is not recent but I have this issue on my Toyota tundra and have a misfire on one cylinder. Could they be related?
Yes could not be a complete spark because of oil on the tip. Rough running engine. Change spark plug
tube seals.
Would this cause smoke to come from the engine?
Yes
True words or open the hood and check things
If you just pull the plug, oil will drain into the cylinder. Be sure to cover the plug holes to prevent oil splatter, spin the engine over a few times before installing the plugs or you'll break a piston or rod.
Any chance you can elaborate? I have a jeep that had the same problem. it was too late before realizing the oil had dripped down after removing he plug. What happens?
@@charr4689 before I took out the plugs, I soaked it down with brake cleaner n took a piece of cost hunger and tried to pull out oil BEFORE taking plugs out. I never heard of breaking stuff but if it filled a piston full enough if might thrash something...
Don't judge too quickly, maybe it wasn't leak before intalling the new ones.
This guy sounds like Vincenzo from Vincenzo's plate
Great video and content. I have been a fan since you first moved into your shop. I think you would love my 1997 Toyota 4Runner with 268000 miles, everything original. I would be honored to have you work on my car. You could use it for your videos. I'm also in California (Long Beach). Please let me know what city your shop is located. You can message me personally if you like...
@Frankie A - Arcata, CA
If oil is leaking from the top of the valve cover, where the coil seal is, why isn't there oil stains down the inside wall of the coil tubes? Is it possible oil is coming from the bottom of the coil tube, where it's attached to the head?
Pull all the plugs, then spin the engine over to ensure pistons blow all oil out of the cylinders. Oil is not compressible so if the plug is pulled without removing the oil, and the oil runs into the cylinder, one could be in for a surprise when trying to start the engine.
I brought a 20 years old Toyota Corolla that has 30K original miles original tire as a back up car. I put the car in storage and did not use it much until last year, I found oil leak from valve cover gasket to engine manifold. I don't have $500.00 for this job ($299.00 for replacing spark plug and $300.00 for valve cover gasket job. I pull a spark plug off and it flood with oil on 3 spark plugs and struck PVC valve. I pull a valve cover off and put a new valve cover gasket and new PVC valve and new Denso spark plug. and $12.00 cleaning solution and put everything back. It took me 4 hours as an old man working on the sun at 100 degree temperature. I clean everything. There is no leak. I also replaced a power window regulator two years ago because I don't have 6 weeks waiting time with can not window open and I save $700.00 and risk to have window open for two months,
That would definitely fork something up. Didn't think about it till I actually thought about it. My corrosion needs done...
Hi i replaced the valvecover gasket on my bmw e36 cause i found oil in the plug chambers.i removed the oil from the plug chambers but did not removed the plug .now my car do not wanna start
Phillip Zibula you need to check and make sure you have the firing order correct
Now there's oil on the top of the piston rings and it probably wouldn't start up when u put new spark plugs
See you later my friend
I change my value cover gasket but I'm still having a lil less oil in my spark plugs anybody now wat else it could be?????
did you just take the plug out without blowing out the oil in the spark plug tube? all that oil just fell into cylinder...
I used rag and air compressor before undoing the spark plug
@@akav75 i was about to say lol The magic of video editing
So what, a few drops of oil on top of piston. It will immediately burn off when started.
@@heavysnow8616 more than a few drops and can and will foul out his brand new plug
You just let all that oil fall into.the combustion chamber. Should have cleaned the oil before removing the spark plug.
The spark plug gaskets were probably reused when the valve cover gasket was replaced.
Spark plug O rings are built into the valve cover gasket on these engines
I'm looking to do it myself not be shown what I already see xD
Today when i driving i start feel that my engine is stutter in full throttle with no power at all and it was scary in up hill when i tried to pass slow truck, of course the check engine light has on . so i drive cautiously in half throttle use to the dealer service and the mechanic say i need new valve cover gasket, also the oil leak damaged the spark plugs, spark plugs coils and spark wire that swapped too.
I had that problem of lack of power up a gentle incline... Fuel injectors MAY be the problem and got new rebuilt ones that are warranted.... about $130 shipped... and I found my symptoms were from an old (and now replaced) intake manifold gasket (leaked air after the MAFS already had measured the air going by it...). An old car will have gaskets fail eventually.... see?
Doug H. in VA
That’s the problem with old cars, when something happens with engine you start replace parts until fixing the issue or until you decide take the car to junkyard... I pay for my fix a 300 (US) dollars for issue started in 2017. Car itself worth 1,500 dollars... Last week is the second time it happened to me.
Not all models of spark plugs are referenced on the manual, NGK show the standard spark plug compatible and on their website (PARTS FINDER), they have a recommandation for Iridium Spark plug (for better performances), for my Corolla 2000 4ZZ-FE, on the manual, they do not recommend NGK spark plugs at all, in fact they recommend DENSO K16R-U11 and BOSCH FR8KCU, but when you go on the NGK Parts finder, what do i find? www.ngkntk.com/benelux/part-finder/produktfinder/PKW/ZK_BENZINER/TOYOTA/COROLLA/BKR5EYA-11/14141/ Standard Spark plug : BKR5EYA-11 and "or as an upgrade for even better driving performance : BKR5EIX-11" I am surprised that for these 2 engines references for that car (the car on your video), no iridium spark plugs are recommended.
Great contents...👍 in this case what are you suppose to do in order to stop the oil from flooding inside the spark plug Chamber?
At the end of your video l was expecting you to tells us the fix of this particular the problem except from the fact that you mentioned OEM spark plugs at end of your Video!!
Change the gasket and o rings
@@tracy6888 , Thanks for the feedback 👍
@@MrLogic1971 , Thanks for your feedback, l really appreciated 👍
@@MrLogic1971 , Thanks again.. Enjoy your Holidays 🎅
@@MrLogic1971 $400 for oil+tube gaskets replacement!! Bah, I better do it myself being sure of getting the job properly done!
You should not remove the spark plug when is full of oil, the the piston is full of oil
Real mechanics look and listen to learn. Never repeat stuff you don’t know is fact.
Always DOUBLE CHECK NUMBERS THAT WILL BLOW YOUR MOTOR.
OR FRY YOUR ELECTRICAL SYSTEMS .
Where is your shop located, I'm looking for a good toyota mechanic.
If youre in NJ im very good!
He's somewhere in Northern California.
@KGB Reviews - Arcata, CA
And plugs
My Toyota corolla doing misfire, due to this flooded oil in plug area....
easy fix... Just replace the valve cover gasket.... You should've clean the hole of oil ,,,before you took the plug
"Oh my gawd!!!"
Guy at parts store probably gave him wrong plugs.
Wow, what kind of "IDIOT" would put the WRONG plugs into an auto! Good Job Mr. Toyota Maintenance!
Me. Just being honest. That's why I'm watching the video in the first place.
More than likely the seller wether private or dealer didn't care having sold for a low price, and figured new owner can eat it. Still very shady not to disclose the issue regardless, especially if a dealer.
Tube threads need sealer
AutoZone has magnetic spark plug sockets. I'm never going back.
Since when? Cause my local store sure didn't have any. I'd love some.
Yeah mine either. Just stuffed a paper towel in between the spark plug and deep socket until the tension was right and it wiggled free perfectly after I hand tightened it 🤙🏻
Doesn't seem like you do any complex Jobs in your garage only simple fixed from what I have seen on your channel so far. That's not to say you don't provide good advice i.e follow cars manual for specs, carry out maintenance as per manufacturers schedule etc.
people don't care (ya ,ya it runs great) then you have to do all kinds of repair work sad!!!!!!!!!!! just give me the $$$$$
Looks like another POS seller was covering up defects before a private sale.