Yamaha Grizzly front wheel bearing replacement
Вставка
- Опубліковано 20 бер 2017
- Following on from the flood damage appraisal on the Yamaha Grizzly 450 I completed the service on the bike. The one last job to get done was to replace the front wheel bearings...
All the 'servicing' videos have all been uploaded previously, however, replacing the front hub bearings is another common task on ATVs so I felt I'd put the work to camera as it may be helpful to one or two of you.
This video covers the disassembly & removal of the knuckle joint, the removal of the seals & bearings, an inspection of the casting, instillation of the new bearings and seals & then the refitting to the bike.
The video includes a few helpful hints and tips, a torque setting or two & even the part numbers for the bearings.
If you have any questions then please add them to the comments section below & I'll do my best to get back to you soon...
Andy Mechanic - Авто та транспорт
Great vid to watch on a lazy Sunday afternoon. Thanks Andy!
great work Andy, love your videos, well spoken and is alot more professional than most of the other mechanical videos, I really enjoy hearing you speak.
+Chukie400 Thanks :-) I started a new job recently so am having to focus on that for a bit whilst I settle in and get to know what's what. I'll be posting new videos in a few weeks.
Pleased you like the videos. Cheers for now Andy
congrats and good luck. 🍀
Brilliant 👌 So easy to follow .
brilliant video
Amigo a mí cuatrimoto Yamaha grizzly 350 le cambié los baleros delanteros pero las llantas se mueven del centro hacia los lados aunque también cambie las rotulas ¿A qué se deberá esto y cuál puede ser la solución? Te agradecería un consejo, saludos desde Chiapas México 😅
Обойму старого подшипника нужно было использовать, да и лучше было использовать пресс
You could put the axle nut back on and bang on that while you take the cv axle out. It help to not damage it. Seen it on ETCG
My 2002 grizzly started over heating had coolant in the resaver at the full level started blowing steam out the over flow line shut it off the next day was looking at it and now there was no coolant in the resovour no fuel in the oil what is the problem
How to determine if it wheel bearings or cv joints on my Yamaha and big bear 350 thank for your vidio verry instructive 👍👍👍👍
I’m from Ottawa Ontario Canada
Great video instruction. Curious, what kind of grease do you prefer? Al from Alaska!
A really good video as always!
Assume the bike is not flooded.... In your opinion.... When do you know when it is time to replace wheel bearings ?
Symptoms, handling, what to listen for... etc...
/Jonas - Sweden
Torque Spec 46:48 Thanks !
Cant figure out why so few views??? Let see what I can do about this. Ill spread the word some Andy I think there very informative and comical.
+NotHarry1000 Thanks, yes any help would be much appreciated, I don't have the time to try promote the videos but saying that the channel is growing pretty well. Thanks again for the feedback and pleased you enjoy the videos...lots more to come :-)
Followed all steps but damn axle is seized up in knuckle. noy sure how to remove
Andy i like your style but seals and gaskets always need replacing. They are short money easy to find items someone should be able to source for you especially wheel bearing seals. I agree with some (Correction) most) stuff but not all of your methods.
+H I agree. I would normally replace all gaskets and seals but at the time if doing the repair some were not available as on backorder.
Thanks for the feedback. Cheers Andy
I have tried to save time and money this way is all thinking sealed bearing would work instead of true seals. Shockingly ALWAYS comes back to haunt me with reduced service on the equipment. What ever happened with Your sons transmission on his bike new engine or did you split the case? Not sure how to search.
I think the bearing failed because all of the archers fell out of the caste nut turrets which was upside down.
Lol
Nice explaination video but little too long for a busy man to finish the whole video and you need power tool to work faster next time amen
You need some ratchet wrenches 🔧my friend
Yep. Have them.now. Cheers Andy
I figured you would by now 🙂