Proverbs 26:4-5 - Answer not a fool according to his folly, lest you be like him yourself. Answer a fool according to his folly, lest he be wise in his own eyes. The self-confident fool thinks too highly of himself and his opinions, and he shares them freely. How should a wise person deal with him?
Yup a 48mm done right is a sleeper. Small transfers and all. :) Your beginning to get the "Colonel Miles Quaritch" ( Avatar reference ) look as you address your inner most feeling to some of these on line characters , hey.... a hint, not worth the energy. You have some fun & interesting stuff , Just do what u do when running and building your saw toys. :)
Sometimes I just gotta blow off a little steam, that's all. Everything would have been kosher had the fella not talked about all his experience and how this is what he does daily. I appreciate your support.
Controversy gets views it seems I don't care much for it but it has invaded our saw community I am starting to see it all over lately. I would be happy to see it go away but I think it's just getting started is my guess.
@treebender261 You are absolutely right Treebender. I have probably close to 800 videos. Maybe 20 of them are like this. So clearly, I don't like to do it or I would have much more of it. The ones I do have are often among my fastest growing videos. If a person were to make nothing but trash like this...their channel would skyrocket.
@@novicelumberjack Sad but true I'm afraid. :( I rather just be positive but I do have to admit once in a while a little attitude slips thru. Then I try to make the next few just positive stuff.
I got very lucky and traded for a 2165 with a custom popup and a solid port job with the lovely 48mm bore cylinder and I was a little shocked… it’s hard to find a difference between a 50 version and it… I have been holding onto two more 48’s because I am done looking for more power… I just want a balanced engine with the best fuel mileage and just enough power to pull the bar and chain combo nicely… I’m not in a race and I’d really prefer not to be waisting fuel… and 65cc is plenty for a 24-25 and the 28” with skipper is possible if it’s a hyper active 65! 😂😂😂
Not going to be able to watch this one Boedy. Sorry. I have a zero tolerance policy towards idiots, and he certainly checks that box. Ya'll have a wonderful day!
I love this shit. I get it ALL THE TIME. I just had a guy who I'm sure can't change his own spark plugs commenting that his 440 rancher is running 250 psi... no it ain't buddy... no it ain't... I believe you explained once the difference between ignorance and stupidity- the problem is we have WAY too many people anymore with both. Rock on Boedy.
Talking about measuring the cylinder squash , there are a few ways to measuring and adjusting. When you "ways" are off or worn on a lathe , you measure , then "scratch" them in.
I tend to just hide my channel from people who leave stupid coments, because I can be a real asshole towards stupid ignorant people and I don't want a community strike. 🤣
The OEM 51.4MM cylinders started off as a cutoff saw jug, then Husky developed a 51.4 chainsaw jug, produced both for a while, then eventually discontinued the cutoff saw jug and put the chainsaw jug on everything. They have smaller transfers like a 365 Special jug. The 52MM aftermarket jugs are based on a 50mm 372 jug.
Boedy the 261/262 Husqvarna cylinder doesn’t have skirts/ears either! You don’t need to justify your knowledge there will always be a person that knows everything and sometimes you just have to leave it at that and walk away!
I agree the 48mm runs better than any big bore. I wouldn’t swap a 50mm in its place me personally!! The 365 special is one of my all time favorite saws
You have a good channel. Just do your thing and don't worry about other comments. Remember that you get information from others on youtube for your channel. Dont't forget them when you pass your information on to others. Thanks
Haha, funny video Boedy! I get a kick out of the drama! I can't stand when people ramble on their sentences and dont make any sense like that with no commas or periods. I love the channel man, keep up the good work. Don't let the idiots get to ya.
Boedy is the kind of guy that I have no clue if we would be best buddies or absolutely hate each other. We are somewhat similar in admitting when wrong and constantly improving. The difference being you are handsome and a lil cocky and I am equally handsome but taller and unintentionally condescending when I talk to people. Its so hard for me (an all knowing superior being) to explain something to a person that is older than me. Either they cant accept that someone younger knows something they dont or maybe I am just an asshole. Who knows🤷🏼♀️
I inter jack now at 16 minutes. You're a humble man without prejudice. Thé reason I "signed" up for this channel at first. Great to see you keep doing your thing.👍🏻 Greetings from the Netherlands
Thank you for the great information and your correct everyone can learn something from this! Even I learned something that I'd forgotten about and is worthwhile to go reread is the MacDizzy The Enthusiast Article...there's plenty of learning there!
Hey Boedy Love this video there’s always going to be someone out there that’s going to challenge you even if they talk shit I just look at them and laugh 😂 I remember my father telling me you never stop learning even from the stupid people and don’t make their mistakes.
Wells for won, it is called push not squished or quenched. For too, alls cylinder has drop down piston wall extenders…. Alright I tried to be an idiot, just ended up pissing my self off. On a real note, if you deck down the bottom of a cylinder with sand paper and a flat surface it tends to help stay even to use a figure 8 motion. I learnt that from back in nam
Some do some don't and all boedy has been going through lately with his dad he just had enough and had to blow off some steam and I can say that I'm glad he did because holding things in just adds to the boiler getting ready to blow up this loss of steam will help him sleep better tonight hopefully!!
You fucking rock Boedy don't let the naysayers get to ya too much! Oh by the way I'm rebuilding my 026 and guess what no cylinder skirts!! I love your shit man because you can take a joke with the best of them!!
Like your style Boedy. Unfortunately there are alot of different people out there and occasionally there's a few who just don't know any better and there's nothing wrong with that.Just try to know what your talking about before you comment. One told me he hated to see a brand name cylinder ( NEW OUT OF THE BOX STIHL OEM 660 TO END) get butchered like that. Said the ports were to wide and plating will peal. Saw will not run but if it did will make no power. He knows because he's messed up a lot of his own saws. I was pleasant and explained a few things and wished him good luck in his future builds signed "THE BUTCHER". Keep up the great work!
No idea what your talking about, so it must not have been an argument with me. Nothing wrong with telling me when I'm wrong, but when I'm not wrong and a person acts superior...that obviously gets to me.
@@novicelumberjack Amen to that and yes we did I told you to put a sharp chain on your saw because you were shooting sawdust instead of chips and you told me it was sharp an so on.......
Ill give ya a few more cylinders without the skirt. Stihl! My domar 9000 also didnt have one either. Some of these people are just trolls. What made me appreciate your channel was that wild thing. You spanked on guys with a whole lot more resources than you have. Not to mention you blind ported it!!!! Anyways let um know! “ Your an idiot!” Price less!
Dam boedy I've never heard it called CLINCH, every chainsaw builder i know of calls it squish hell even your nemesis IH calls it squish! Lmfao 🤣 🤣 🤣 🤣 🤣 this dude must be a basement dweller hollering for mom to bring him a hotpocket because he's arguing with boedy again!! Lmfao 🤣 🤣 🤣 🤣 🤣
If you can turn a wrench and make simple repairs then i wouldnt be afraid of them. They are not OEM quality but they seem to hold up fine for the majority of folks. Just dont be surprised if you get one that has a few issues to straighten out.
*** Thanks *** you taught this old man something not chainsaw related. I never use, and therefor never considered, Talk to Text problems. I just thought some folk really were total idiots, or attempting to use English as a second language. For your new found Troll, Piston SQUISH right from Wiki: en.wikipedia.org/wiki/Squish_(piston_engine)
Love the ending! I was once told, Never argue with an idiot because they will bring you down to their level and beat you with their experience! Haha
Proverbs 26:4-5 -
Answer not a fool according to his folly, lest you be like him yourself. Answer a fool according to his folly, lest he be wise in his own eyes. The self-confident fool thinks too highly of himself and his opinions, and he shares them freely. How should a wise person deal with him?
I have to admit I was very good at math in school and struggled with English. A little punctuation goes a long way getting your point across.
It's the difference between helping your uncle jack off an elephant and helping your uncle Jack, off an elephant.
Me grammar sucks too
Blame pubic schools
"Art of squishing things until they make power "
Yup a 48mm done right is a sleeper. Small transfers and all. :) Your beginning to get the "Colonel Miles Quaritch" ( Avatar reference ) look as you address your inner most feeling to some of these on line characters , hey.... a hint, not worth the energy. You have some fun & interesting stuff , Just do what u do when running and building your saw toys. :)
Sometimes I just gotta blow off a little steam, that's all. Everything would have been kosher had the fella not talked about all his experience and how this is what he does daily. I appreciate your support.
Controversy gets views it seems I don't care much for it but it has invaded our saw community I am starting to see it all over lately. I would be happy to see it go away but I think it's just getting started is my guess.
@treebender261 You are absolutely right Treebender. I have probably close to 800 videos. Maybe 20 of them are like this. So clearly, I don't like to do it or I would have much more of it. The ones I do have are often among my fastest growing videos. If a person were to make nothing but trash like this...their channel would skyrocket.
@@novicelumberjack Sad but true I'm afraid. :( I rather just be positive but I do have to admit once in a while a little attitude slips thru. Then I try to make the next few just positive stuff.
I got very lucky and traded for a 2165 with a custom popup and a solid port job with the lovely 48mm bore cylinder and I was a little shocked… it’s hard to find a difference between a 50 version and it… I have been holding onto two more 48’s because I am done looking for more power… I just want a balanced engine with the best fuel mileage and just enough power to pull the bar and chain combo nicely… I’m not in a race and I’d really prefer not to be waisting fuel… and 65cc is plenty for a 24-25 and the 28” with skipper is possible if it’s a hyper active 65! 😂😂😂
I agree.... stay away from the big bore kits...
Aarons didn’t work out well what happened??
Not going to be able to watch this one Boedy. Sorry. I have a zero tolerance policy towards idiots, and he certainly checks that box.
Ya'll have a wonderful day!
I love this shit. I get it ALL THE TIME. I just had a guy who I'm sure can't change his own spark plugs commenting that his 440 rancher is running 250 psi... no it ain't buddy... no it ain't... I believe you explained once the difference between ignorance and stupidity- the problem is we have WAY too many people anymore with both. Rock on Boedy.
i wish i had a 250 psi chainsaw. i'd put diesel in it LOL!
Who's pulling the rope for him his grandma LMFAO the damn recoil wouldn't last much over 170psi on a good day
@@schlomoshekelstein908 I have a 55 with an 028 Super piston that makes 260. I don't think it would run on diesel 😂
He must of tipped oil into the cylinder before he tested it!
It's hard to be humble when you know you are great.
👍👍. LOL. Loved the mic drop at the end…..Ladies and gentlemen, Elvis has left the arena!
Talking about measuring the cylinder squash , there are a few ways to measuring and adjusting.
When you "ways" are off or worn on a lathe , you measure , then "scratch" them in.
I tend to just hide my channel from people who leave stupid coments, because I can be a real asshole towards stupid ignorant people and I don't want a community strike. 🤣
Me 2 man !!
You know I love you man but I think you’re wasting your time trying to educate people like this
HARVEY has his nephew trolling you! LONG LIVE THE IRON_DONKEY!
Well this guy was a dick to Harvey when he was in the hospital. His nephew giving him shit is retaliation.
I'd venture to say skirtless cylinders are more common than skirted.
Hahahaha... Someone just rubbed him the wrong way, worse then I did...😂
You tell him! Hopefully he gets it and continues to stick around. With a little humble pie.
Exactly.!
From my understanding, the big bore kits are modeled after a concrete saw cylinder that only runs at about 8000 rpm.
The OEM 51.4MM cylinders started off as a cutoff saw jug, then Husky developed a 51.4 chainsaw jug, produced both for a while, then eventually discontinued the cutoff saw jug and put the chainsaw jug on everything. They have smaller transfers like a 365 Special jug. The 52MM aftermarket jugs are based on a 50mm 372 jug.
Boedy the 261/262 Husqvarna cylinder doesn’t have skirts/ears either! You don’t need to justify your knowledge there will always be a person that knows everything and sometimes you just have to leave it at that and walk away!
Man I love this shit😂😂😂
Are they also called ears when the skirt goes all the way around, or should we bring in even more terms and call it a collar
How about calling them wingtips? Lmfao 🤣 🤣 🤣 🤣
I agree the 48mm runs better than any big bore. I wouldn’t swap a 50mm in its place me personally!! The 365 special is one of my all time favorite saws
You have a good channel. Just do your thing and don't worry about other comments. Remember that you get information from others on youtube for your channel. Dont't forget them when you pass your information on to others. Thanks
This video was a long time coming, well done.
Huh…. I think this is my favorite of all of your videos. Pretty sage advice! 👍🏻
I love these videos lol. Most youtubers avoid the trolls which is fine, but I enjoy watching you rattle them back.
Welcome to the entitled generation of young know it alls!
I call em dumbasses.
Haha, funny video Boedy! I get a kick out of the drama! I can't stand when people ramble on their sentences and dont make any sense like that with no commas or periods. I love the channel man, keep up the good work. Don't let the idiots get to ya.
Boedy is the kind of guy that I have no clue if we would be best buddies or absolutely hate each other. We are somewhat similar in admitting when wrong and constantly improving. The difference being you are handsome and a lil cocky and I am equally handsome but taller and unintentionally condescending when I talk to people. Its so hard for me (an all knowing superior being) to explain something to a person that is older than me. Either they cant accept that someone younger knows something they dont or maybe I am just an asshole. Who knows🤷🏼♀️
Sounds like the latter
@@qdogbenson3112 referring to me being an asshole or not being buddies with Boedy
I inter jack now at 16 minutes. You're a humble man without prejudice. Thé reason I "signed" up for this channel at first. Great to see you keep doing your thing.👍🏻 Greetings from the Netherlands
Should I ad... Nah... The message came across.
A last comment. Do being you👍🏻
Stihl 036 and 026 have no skirts either.
Thank you for the great information and your correct everyone can learn something from this! Even I learned something that I'd forgotten about and is worthwhile to go reread is the MacDizzy The Enthusiast Article...there's plenty of learning there!
I like USA product because it's really great it is.
You've got the patience of a saint..
That guy was coherent as fuck.
Tamato tomato....Can you show us how to cut a tree down?
NO No No they're not steps or stairs, they're treads lol. I feel your pain Boedy.
DAYUM!!! Well done friend.
Hey Boedy
Love this video there’s always going to be someone out there that’s going to challenge you even if they talk shit I just look at them and laugh 😂
I remember my father telling me you never stop learning even from the stupid people and don’t make their mistakes.
I guess the previous owners for my 024, 026 and both 660s all cut the damn skirts off.
Wells for won, it is called push not squished or quenched. For too, alls cylinder has drop down piston wall extenders…. Alright I tried to be an idiot, just ended up pissing my self off. On a real note, if you deck down the bottom of a cylinder with sand paper and a flat surface it tends to help stay even to use a figure 8 motion. I learnt that from back in nam
Also i just got a poulan 4000 cylinder in the mail today and some bastard sanded my ears off… i’ve been had.
I can't think of a single Stihl professional saw that has the ears. Everyone I have seen is flat bottom.
Hey buddy i enjoy your videos and thanks for taking time to compare saws that everyone can afford that alot of other creators cant be bothered with.
Good class thanks for the update
Love the rants.
Methinks ol boy done got to the "squench" area of his bottle before he posted those comments 😂
Wow, that was so dam good. Nice one. 🤣🤣🤣💥💯💥
I don't see Homey Blonde Dirty Skive in the comments section .
Why would you care about youtube comments?
Some do some don't and all boedy has been going through lately with his dad he just had enough and had to blow off some steam and I can say that I'm glad he did because holding things in just adds to the boiler getting ready to blow up this loss of steam will help him sleep better tonight hopefully!!
Sorry you have to deal with this. I like to think I'm smart enough to know that I don't know.🤔
You fucking rock Boedy don't let the naysayers get to ya too much! Oh by the way I'm rebuilding my 026 and guess what no cylinder skirts!! I love your shit man because you can take a joke with the best of them!!
Don't feed the trolls
on a side note, is $500 for a husky 2100CD that runs a good deal?
Yes
Haha holy shieeet i thought it was about me 😂 stirring ya up boady
I on the other hand have never heard about quench but okay
Sounds like a good troll.
You tell em Boedy
Like your style Boedy. Unfortunately there are alot of different people out there and occasionally there's a few who just don't know any better and there's nothing wrong with that.Just try to know what your talking about before you comment. One told me he hated to see a brand name cylinder ( NEW OUT OF THE BOX STIHL OEM 660 TO END) get butchered like that. Said the ports were to wide and plating will peal. Saw will not run but if it did will make no power. He knows because he's messed up a lot of his own saws. I was pleasant and explained a few things and wished him good luck in his future builds signed "THE BUTCHER". Keep up the great work!
Mana yang paling besar piston nya bos?
I do talk to text and the phone hates me
Mine2
Hey, I argued with you about a chain but I understand what you were saying some people don't
No idea what your talking about, so it must not have been an argument with me. Nothing wrong with telling me when I'm wrong, but when I'm not wrong and a person acts superior...that obviously gets to me.
@@novicelumberjack Amen to that and yes we did I told you to put a sharp chain on your saw because you were shooting sawdust instead of chips and you told me it was sharp an so on.......
No biggie I still enjoy your channel
MacDizzy is a huge wealth of 2 stroke knowledge. I have had it book marked for years and years.
I mean hell John from jcs Interchange quench and squish
What ever happened to him been silent almost a yr
@@justinweaver8107 nobody really know we’ve heard of he may be having health issues
Anyone that spells cause cuz…. Well
You are certainly not a novice when it comes to 2 cycle knowledge
LOVE it! 😆
It's obvious to me that you somehow traveled back in time and changed these designs to support your side of the story on this one. lol
Clearly.
i once thought i made a mistake, but i was mistaken!
Ya got me with that one! Right out loud laughing! Thanks Barney!
Ill give ya a few more cylinders without the skirt. Stihl! My domar 9000 also didnt have one either. Some of these people are just trolls. What made me appreciate your channel was that wild thing. You spanked on guys with a whole lot more resources than you have. Not to mention you blind ported it!!!! Anyways let um know! “ Your an idiot!” Price less!
The guy is probably 50 years old 😆
I love it
👍🆙BigGuy
😁
👍
Dam boedy I've never heard it called CLINCH, every chainsaw builder i know of calls it squish hell even your nemesis IH calls it squish! Lmfao 🤣 🤣 🤣 🤣 🤣 this dude must be a basement dweller hollering for mom to bring him a hotpocket because he's arguing with boedy again!! Lmfao 🤣 🤣 🤣 🤣 🤣
Waste of time.
🏓
Hahaha
I wish you would quit holding back and tell some of these people exactly what you think of them. 😉
is farmtech 395 any good?? hello from greece @novice lumberjack
I have one.... It is one of Farmertechs best saws I think.
If you can turn a wrench and make simple repairs then i wouldnt be afraid of them. They are not OEM quality but they seem to hold up fine for the majority of folks. Just dont be surprised if you get one that has a few issues to straighten out.
If I knew trolling Boedy was all it took to make a great video I would of started long ago. Lol
*** Thanks *** you taught this old man something not chainsaw related. I never use, and therefor never considered, Talk to Text problems. I just thought some folk really were total idiots, or attempting to use English as a second language.
For your new found Troll, Piston SQUISH right from Wiki:
en.wikipedia.org/wiki/Squish_(piston_engine)