3D Printed Swimbait Fishing Lure - Will It Work?

Поділитися
Вставка
  • Опубліковано 24 гру 2024

КОМЕНТАРІ • 338

  • @RcLifeOn
    @RcLifeOn  6 років тому +139

    "Där satt den" = GOT ONE
    For you non-Swedish speaking viewers. 👍

    • @Boltyoutube
      @Boltyoutube 6 років тому +2

      Nice dude 😁

    • @gemcityfabyard2849
      @gemcityfabyard2849 6 років тому +1

      RCLifeOn hey I know you said not to comment but the only thing you were doing wrong is on the pike you did not set your hook

    • @leemilica
      @leemilica 6 років тому +5

      Thought you were saying "There's somethin" 😂

    • @intevetjag1158
      @intevetjag1158 6 років тому +1

      Vad tror du om guld tuben?

    • @joetke
      @joetke 6 років тому

      I thought it was a 4-letter word...

  • @Domi1988
    @Domi1988 6 років тому +152

    OH MY GOD! You made a video about my swimbait! Thats so awesome!

    • @RevampedOutdoors
      @RevampedOutdoors 6 років тому +7

      It's a great design, nicely done!

    • @Domi1988
      @Domi1988 6 років тому +5

      Thanks alot!

    • @Binaryfarto
      @Binaryfarto 5 років тому +3

      Nice work dude! Just might be what pushes me over the edge to finally getting myself a 3d printer!

    • @pjanoo6973
      @pjanoo6973 5 років тому +2

      @@Binaryfarto You can order a 3d printed part from companies rather than buying a printer unless you fish often and lose a lot of lures.

    • @espenwangsalbu8610
      @espenwangsalbu8610 5 років тому +2

      @@pjanoo6973 Where?? SHOW MEEEEE need more jerkbaits

  • @maazshariff9309
    @maazshariff9309 6 років тому +65

    2 momths ago I was surfing on UA-cam and came across your channel. Since then u have never disappointed me with any of your projects. "By the way I'm from India". U inspired me to learn more about 3d printing. My dad met an accident on 8 June. I lost my dad on 14 June 18. I had totally lost my track. . I've started learning programs Fusion 360, SketchUp, Maya 3d animation n so on. I just want to thank u for giving me a new direction to learn new things. Keep up with your work 🤗 🤗

  • @spikekent
    @spikekent 6 років тому +8

    Dude, your drone footage of your stunning country always has the wow factor. Spectacular!

  • @Andysfishing
    @Andysfishing 6 років тому +11

    I will be trying my own 3D printed lure soon. I was surprised to see you like Fishing. I found your channel a while back for my 3D print projects. When you feel the strike, maybe set the hook more, that will drive it in and hold better.

    • @Aaron-zn8mg
      @Aaron-zn8mg 5 років тому

      Hey andy didnt know id see u on here haha. Thinking about printing some as well

  • @zandersmith9390
    @zandersmith9390 5 років тому +23

    When the fish bites you need to pull back on the rod and “set the hook” I think that would help you land more fish 🎣

    • @OfficialZurg
      @OfficialZurg 3 роки тому

      That and also id recommend keeping the rod tip down to avoid any jumping

    • @imgmakr
      @imgmakr 3 роки тому

      @@OfficialZurg Actually loosen up a little when they jump. Too much line pressure pops the hook.

  • @DonGoddardAllAboutPaint
    @DonGoddardAllAboutPaint 6 років тому

    I'm going to mirror another comment on here and say how impressed I am with all of your videos. I truly enjoy watching everything you produce.
    Welcome to the world of fishing. It's 90% frustration just waiting on that 10% of pure joy!

  • @elbeau1
    @elbeau1 3 роки тому

    The scenery reminds me so much of where I grew up, in western Washington state in the US. My grandpa Einer was from Norway and I can see why he liked it here so much. Nice Helly Hanson life jacket too! Thanks for the video.

  • @Binaryfarto
    @Binaryfarto 5 років тому +1

    Dude! That is so f'n cool! I'm so impressed!
    Well done to you and to the designer of that swimbait!

  • @hed420
    @hed420 6 років тому +31

    I wanna know more about this boat that you've made . Looks interesting .

    • @万杰-w9s
      @万杰-w9s 6 років тому +2

      ME TOO

    • @renatoduarte2210
      @renatoduarte2210 6 років тому +2

      ME TOOO

    • @niilo_ylilehto22
      @niilo_ylilehto22 6 років тому +2

      ME TOO

    • @Helveteshit
      @Helveteshit 6 років тому

      Looks like Construction Foam for insulating concrete floors. Basically 300mm thick stacked twice with a wooden frame around.
      EDIT; On another angle, I suspect there might be more than that.

    • @edstar83
      @edstar83 6 років тому +3

      It's a Viking Secret.

  • @joetke
    @joetke 6 років тому

    Swedish Nature loving is not a myth. Congrats to both fishes who played their roles so well.

  • @3dworkshop933
    @3dworkshop933 6 років тому

    Your videos got me into 3D printing and it is really inspiring that you push the boundaries of 3D printing

  • @sharpnesstherapy502
    @sharpnesstherapy502 6 років тому +48

    3D print a Rod holder Please!!!

    • @tufedw19
      @tufedw19 6 років тому +2

      That was my thought to make a pole holder.

    • @choschiba
      @choschiba 6 років тому +1

      That’s the same I thought. Maybe one that has a small bell attached to it.

  • @leesuschrist
    @leesuschrist 3 роки тому

    These things swim really nice, super realisitic! Added to my list.

  • @adamandharrys
    @adamandharrys 6 років тому

    3D printing and fishing! 10/10 absolutely brilliant!

  • @monkeycigs4762
    @monkeycigs4762 3 роки тому

    Dude, you’re a master of b-footage. Beautiful videos and it’s clear you understand the true nature of fishing. Positive attitude, relaxation and admiration of a clean catch. Well done all around!

  • @Mister_Stork
    @Mister_Stork 3 роки тому

    4:06 „We have o-fish-ially started“ 😂

  • @avejst
    @avejst 6 років тому

    Nice tour👍😀
    Thanks for sharing👍😀

  • @vy10mac9
    @vy10mac9 Рік тому

    I like these lures. They look like real fish swimming under water.

  • @TheGbow0704
    @TheGbow0704 6 років тому

    I really enjoy your channel , I love that you take us outside the shop when you try out your creations, you're a very inspiring young man

  • @ericwessel6511
    @ericwessel6511 6 років тому +6

    Love the video!!! I think you would have a lot more luck if you were "setting the hook" so when you initially get a fish on most of the time it is just the lure going in to the fishes mouth or the initial bite, but to get the hook to set into their mouth you need to give the rod a good pull upwards. So when you feel the rod move, say it moves to the right, then grab the rod and pull it hard to the left (opposite direction) and this will set the hook into the fishes mouth. I think you will have better luck with actually getting the fish on. Much love man!

    • @patrickm5790
      @patrickm5790 6 років тому +2

      For a pike you have to give him some time, because they grab the fish by the back and then they go down in the deep to swallow them. So you have to give them some time.

  • @MarionMakarewicz
    @MarionMakarewicz 6 років тому

    You bring such joy in the world by your activities. Thank you so much for sharing it!

  • @patprop74
    @patprop74 6 років тому +5

    Next on the printing list ! fishing rod holders lol

  • @mikehensley78
    @mikehensley78 3 роки тому

    man! I never thought about 3D printing fishing tackle! that is AWESOME! pike are hard to get a good hook set on either way. i have watched a lot of your RC car videos somehow i never saw this one until today. very cool!

  • @marcus4335
    @marcus4335 6 років тому

    Good to have you back

  • @andypodmore6721
    @andypodmore6721 6 років тому

    My misses family live on the French/Swiss border and I think that is a beautiful part of the world. Where you live is just breathtaking. Another excellent video and some beautiful looking Perch and Pike you caught there. Well done

  • @the_golden_ingot
    @the_golden_ingot 6 років тому +1

    I always look forward to watch your Videos!
    This is Quality Content!

  • @Dimitri2014
    @Dimitri2014 6 років тому +3

    Well done Buddy, would love to see more stuff like this, maybe print some rod holders.
    Please please make yourself a waterproof case for that DSLR.
    Or even a fixed mounting place for your tripod so it don't accidentally take a plunge.

  • @l3d-3dmaker58
    @l3d-3dmaker58 6 років тому

    everything is bait! love this idea!!!, and oh man, those dual color prints!!!!!

  • @Hawk1966
    @Hawk1966 6 років тому

    Nice. Surprising durability of those printed lures. Great job!

  • @zetekfr
    @zetekfr 6 років тому

    Beautiful land. Good job Simon.

  • @RevampedOutdoors
    @RevampedOutdoors 6 років тому

    Nicely done sir! This is right up my alley!

  • @Brrraaapp
    @Brrraaapp 6 років тому +3

    subbed; I have been watching your videos, but id love to see a part two of this one!

  • @HawxAnimator
    @HawxAnimator 6 років тому

    The inspiring content keeps rolling, absolutely brilliant, keep it up

  • @ferdikriel
    @ferdikriel 6 років тому

    Hi, Great channel & love your work... Just a tip the reason why you are loosing fish is because you do not set the hook properly. When you get a bite you have to strike hard on the rod to set the hook. Strike = hard yank backwards on rod. Hope this helps. Good luck and keep up the good work.

  • @Ashhlleeeeyyy
    @Ashhlleeeeyyy 6 років тому +5

    Please make more videos cuz i love ur vids .

  • @suburbanfishing6441
    @suburbanfishing6441 6 років тому +1

    Please keep doing these

  • @mariuszzawierucha1310
    @mariuszzawierucha1310 6 років тому +1

    Hi Simon. And now I'm interested about that dual extruder :) Could you show us in future how it works, some details etc , please? What about Pallete + which you have bought some time ago? Any success or rather avalanche of failures?

  • @MrTerott
    @MrTerott 6 років тому

    Very well swimming lure.

  • @rustycrustytriesstuff
    @rustycrustytriesstuff 5 років тому

    Very nice! Just a tip, most hooks aren’t very sharp from the factory. If you give them a little attention on a hone, you could increase your hookups. Got to try these baits on my printer. 👍🏻

  • @backpocket718
    @backpocket718 6 років тому +3

    Would be cool to design a mold where you could inject a rubbery plastic. Would also be cool because you could add your hooks before injecting and have them linked through the bait with fishing line. This way if a fish really got after it, it couldn't rip out a hook. I've been dreaming on molding my own baits but i want to make something biodegradable. I hate the thought of tossing more plastic in the water that'll never go away.

    • @Tessa_ract
      @Tessa_ract 5 років тому

      There are companies that make biodegradable soft plastics. You can also switch out your lead weights with tungsten, or even make your own out of stones.

  • @CodeLeeCarter
    @CodeLeeCarter 6 років тому +36

    You would land more if you had printed it a wee smaller.

  • @braydencooper7482
    @braydencooper7482 6 років тому

    Right when you get a bite pull the line really quick with a jolt to set the hook in its mouth then reel

  • @wididewanaaditya3208
    @wididewanaaditya3208 6 років тому

    Oh Man, what a lovely place, no wonder you always have a great idea for your content

  • @somnathbanerjee1673
    @somnathbanerjee1673 6 років тому

    Paradise on Earth 😍😍😍

  • @wmc9317
    @wmc9317 6 років тому

    Great Video i would love to see more videos like this well done!!

  • @boniklic964
    @boniklic964 6 років тому

    Amazing brother

  • @paulbehrens5842
    @paulbehrens5842 6 років тому +1

    Do you have a recommendation for infill versus depth for the lures? I fish at a dam that is full of weeds at 2 meters.

    • @Domi1988
      @Domi1988 6 років тому

      Allways print this lure in 100% infill! otherwise it will not be waterproof. there is a head for this lure without lip that only dives about 1m.

    • @paulbehrens5842
      @paulbehrens5842 6 років тому

      Okay, cheers.

  • @puyarus99
    @puyarus99 6 років тому

    Keep up the good work, you are doing an amazing job.

  • @mtlh05
    @mtlh05 6 років тому

    I'm happy I found your channel

  • @MCsCreations
    @MCsCreations 6 років тому

    Great work, dude! 😃

  • @ShenRC
    @ShenRC 6 років тому

    🐟Nice!! I make my own lures some times also...make that same swim bait with a chartreuse yellowish green day glow tail and one with a white tail and try em out! I would also do a day glow orange tail and also make the whole lure in chartreuse color and in day glow orange and try those out also! I bet the pikes would hammer em then!

  • @JosiahVaughan
    @JosiahVaughan 6 років тому

    Dude I love your videos. They are so creative and inspire me to makes stuff. Also the humor is incredible. But here’s a tip: buy an ND filter.

  • @Jimunu
    @Jimunu 6 років тому

    Tack för att du släppte tillbaka dem. Då kan du fånga en till gång senare och andra orsaker.

  • @jamescullins2709
    @jamescullins2709 5 років тому

    awesome, I will give it a go. Thanks

  • @crezer926
    @crezer926 6 років тому

    very beautiful place !!!

  • @barrettbryan8905
    @barrettbryan8905 10 місяців тому

    You most definitely need better/sharper hooks I think.
    Hooks and the sharpness of them are a very under rated part of lures and fishing.
    Pike have hard mouths so they need the hook set good and sticky sharp hooks. Just a suggestion, they could have just not bitten the lure in the best way, but it looked to me like the hooks could be part of the issue.

  • @MrMarius2000
    @MrMarius2000 4 роки тому

    If your making a part two, I think it would be helpful to make the lures more shiny and reflective, maybe some metallic paint would work, you have to catch the attention of the fish 👍

  • @vit.budina
    @vit.budina 6 років тому

    I saw JGAurora A5 behind you. What are your settings? Will you make a review, please?

  • @ivansabolek1373
    @ivansabolek1373 6 років тому +9

    Make a RC submarine!

  • @waffle628
    @waffle628 6 років тому

    yes a new video

  • @gnarly3dkustoms
    @gnarly3dkustoms 6 років тому

    You're losing the fish because you have to set the hook. Once you feel the fish on, grab your rod and yank it back above and to left or right of your head depending on which way you're comfortable doing it and you should be able to reel it in with no problems, unless your line brakes that is. Another GREAT video!! 👍👍

  • @Sky-hb7bl
    @Sky-hb7bl 6 років тому +1

    oh my gosh! you are my favorite UA-camr. I'm Sam . and come from Taiwan. Also in my Taiwanese Laboratory project is produce 3D Printing Robot Fish .So glad can seen this video related my project. It's Fantastic ! Please do more related this project Video. And I think we can exchange for the idea . It's amazing ! Hope you have a nice day! Sam(Hsieh,Chang-Hsuan)

  • @norsebavarian1941
    @norsebavarian1941 4 роки тому

    If you're a good enough angler to hook a pike, you are good enough in my book.

  • @NP3D
    @NP3D 6 років тому

    Ah man, I love to fish as well, I fly fish and make my own flies! Cool vid!

  • @loczster
    @loczster 6 років тому

    I dont know about fishing but would it be a factor if the tail was very bright, neon color and a bit smaller over all? thanks. I really love the the scerry part of your videos. They are amaszing.

  • @whity4584
    @whity4584 6 років тому

    Beautiful place

  • @jasonm1690
    @jasonm1690 6 років тому

    I'd hate to see you lose a rod, or even that DSLR. Set up some rod holders and camera mounts. Anchor down a crate or 2 as well. Keep up the good work. Your content is the reason why I've made my first 3D printer purchase. :)

  • @EGM1775
    @EGM1775 2 роки тому

    Bro using that Ugky stik that’s awesome I have 2 GX2’s and 1 Elite all medium action 2 piece rods freaking killer

  • @tomasstrom1343
    @tomasstrom1343 6 років тому

    Boströms candybag! =respect😀

  • @pjanoo6973
    @pjanoo6973 5 років тому

    How do you make sure the eyelets stay in the bait? Is superglue strong enough also what size do you use?

  • @وردهالحب-ح6ك
    @وردهالحب-ح6ك 6 років тому +1

    What's the 3d printed you advise me by it..please (anycubic i3 mega.or.CR-10.or.anet a8)

  • @DanielKezar
    @DanielKezar 6 років тому

    very nice!! you got some good big ones there! (better than i could ever do with a worm)

  • @armandocardona6975
    @armandocardona6975 2 роки тому

    one you feel a bite pull directly up to set the the treble hook.

  • @MATLOCKE269
    @MATLOCKE269 3 роки тому

    Super cool :D

  • @the_golden_ingot
    @the_golden_ingot 6 років тому

    Simon, will you pick up The Dji Mavic 2 pro?

  • @henrikwikstrom5705
    @henrikwikstrom5705 6 років тому

    Nice video!! You should try larger hooks, looks a bit small for a pike.

  • @Martin_Jou
    @Martin_Jou 6 років тому

    To stop them from falling off when they jump, keep the rod more straight in the vertical.

  • @wpherigo1
    @wpherigo1 6 років тому

    Nice adventure! Thanks for bringing us along. What is the dual extrusion system you got?

  • @BiodunOnipede
    @BiodunOnipede 6 років тому

    Give this guy a thumbs up,

  • @ggwoodworking6038
    @ggwoodworking6038 6 років тому +1

    You should try to yank it to get the hook hooked, you need to do it at the right time or you will loose them.

  • @TheHunter-cm5ci
    @TheHunter-cm5ci 5 років тому

    Wish i had one of these they have Great action

  • @PhillisHawkins
    @PhillisHawkins Рік тому

    Will you post a better link to the file to upload to my Makerbot. The one attached does not open. I teach a wildlife conservation course are planning our lure design class we want to print the lure. The file does not open.

  • @ametheshlgp74
    @ametheshlgp74 6 років тому

    Awesome video

  • @werner1
    @werner1 6 років тому

    Lost a lot of bass myself, smart fish, the nearest lake to me is 2 hours away :( i'm jealous. But i'm sure they will work in salt water if i print them bigger. Thank you for always releasing great content.

  • @TheZamboon
    @TheZamboon 6 років тому +2

    Hey, cool lure. Add bigger treble hooks. the hooks should be able to touch each other on any crankbait or swimbait. :) better luck next time.

  • @upscalelures
    @upscalelures 6 років тому

    Print some rod holders, that would make trolling a lot easier and great video man!

  • @akshayd211
    @akshayd211 6 років тому

    You live in a beautiful part of the world.

  • @christeamhound
    @christeamhound 6 років тому

    Hey man, where did you get your raft? Did you make it??

  • @eyal4
    @eyal4 6 років тому

    Great video, please do more videos of projects that you build something mechanical or electrical.

  • @juanchopestana3972
    @juanchopestana3972 5 років тому

    Hey! Thanks for the video. I'm interested in building a boat like yours, do you have a video for it?

  • @lukas_06_photo83
    @lukas_06_photo83 4 роки тому

    Hey what wheel your using ?

  • @Sgt_Hest
    @Sgt_Hest 6 років тому +1

    Would love to live in a place like that ^^ So cool.. Ohh yeah btw also cool video :D

  • @haydenhughes6958
    @haydenhughes6958 2 роки тому

    How did you connect the pieces together?

  • @rileyhowe9610
    @rileyhowe9610 6 років тому +1

    This video saved me from boredom 😁

  • @bigjai
    @bigjai 6 років тому

    How did he make/get that boat/raft thing?

  • @meande-man5351
    @meande-man5351 6 років тому

    It’s god dam beautiful where you live! No wonder you’re so happy 👍🏻

  • @umake3dprinting
    @umake3dprinting 6 років тому

    Nice work man! But why no 3D printed fishing rod clamps?

  • @noobhero7485
    @noobhero7485 6 років тому

    Bro how many 3d printers do you have?????

  • @idekwhatsmynamrixuhdbe6779
    @idekwhatsmynamrixuhdbe6779 6 років тому

    Svenskar är alltid bra på att fiska