Fantastic video. It was great to see someone use the printable stuff and then use foam board to strengthen it and then show them finished. Great inspiration!! :)
Now I'm retired I have been making up sets of 20mm and 54mm 'toy soldiers' to give away to less well off folks, I have been trawling the net for freebie papercraft buildings and modifying them (mirror image to get interiors etc) and re-scaling them. That's a lot of work and these look like what I have needed! Thanks for posting.
I would like to second the comment below about seeing a "how to" video. I've been using Dave Graffam buildings for some time, but never thought to mount the printed pages on foam core. I'd like to see how you did that because what you have shown here looks really good! Thank you for sharing your creativity.
Thanks for the kind words! I don't have a setup that would allow me to make a high quality "how to" video. I did post a video on my channel that shows some of the techniques and materials used in one of my Dave Graffam conversions. I believe it is called "Dave Graffam Ruined Church Conversion for Bolt Action part #1 and part #2". That might be of some assistance. Let me know if you have any questions!
@@danbuman8422 I found those two videos shortly after I posted my comment. Thank you for pointing them out. I look forward to watching those and learning how you handled joins and corners with the foam core.
@@danbuman8422 I've probably watched the first video of ruined church conversion three times now. And I've found a small building to use as a "guinea pig". There is one question that I have. Many of the Dave Graffam buildings have two walls joined as one image. Would you recommend cutting those apart and gluing them to the foam core? Or, do you cut a 5mm channel in the foam core to one side of the corner where the corner would be? Thank you again for these videos.
@@earlkriewall7251 After printing out, I cut any walls apart that are joined before gluing to the foam core. Then to join two walls together at a corner of the building, I make a 5mm notch in one of the two wall sections. Only removing the inside card covering of the foam core and the foam layer itself, leaving the outside intact. This allows for a smooth corner joint. My other video on Dave Graffam buildings, I believe, shows a corner a little more clearly as I describe the process. I hope that helps!!
These look fantastic and this is exactly what I’ve had in mind to do with cardstock buildings to make them more durable. I’ve actually got A4 sheets of adhesive printer paper to eliminate the need for glue, so I can just place the print-outs on the foam board. You’ve given me some great ideas and guidance with this video - love the damaged buildings. I’ll definitely order a load of these files, thanks for showing these.
Thanks Lee! These really turn out well and are fun to customize. Let me know if you have any questions, as I have learned a lot of techniques that help improve the process of mounting these on foam core. Good luck and share your results when get to try them out :)
Thanks very much Dan. We’re in the process of selling & buying a house so once that’s all done and we’re settled I’m going to make an effort to start building terrain as I currently don’t have any. I’ll certainly be coming to you for advice.
Wow Dan thanks for sharing this and how you built those buildings. Been wanting to increase the number of buildings for the upcoming Normandy and Market Garden Campaigns and this might fit the bill.
I chose all of mine to fit Normandy and they work well for that. These are the ones I recommend: The Fletchers Shop is the two story building that I show that I modified to be a one story or two story building and put the French signs on the walls. Great kit though the more complex roof makes it more challenging to mount on foam core. The Butchers Shop is the other two story building that I show that has the removable floor to access the lower level. Probably one of the easiest kits to build. The Long House is the livestock building I made. Easy kit with some wonderful texture choices. World War Ruins #4 is the damaged building that I show. Another easy kit with lots of customizing potential. The Ruined Church I did not show because it is a little large to show while running the recorder but is an excellent piece. This is a more challenging piece but again lots of variety and worth the effort. The Carriage House is the free kit that I show at the beginning of the video that I used for three different buildings. Easy kit and a good chance to give them a try. The Cabin is a good kit to have. It is actually designed to have an accessible interior so it has a variety of flooring that I used in some of the other buildings. I did build this kit to make buildings but it is probably one of the best to use for parts on your other buildings. The damaged roof on the ruined building came from this kit.
Thank you! They are tons of fun to build. After you get comfortable with some basic techniques, you can really let your imagination run wild. For very little expense, you can create loads for cool and unique structures. Have fun!!
@@danbuman8422 I've tried paper stuff before but the way that you reinforced them and so cleverly stuck them... Wow, sometimes you just need another set of eyes to find a treasure. Will have fun for sure, thanks!
Great work you have done there with these designs. It’s clear you put some time and thought into these kits. I used something similar when I first started the marvel game and they do look really good with the printed details on the exterior. Great stuff.
Thanks Palmer! I definitely learned a lot of techniques that help the build go smoothly. There rare some challenges to modifying the kits to be mounted onto foam core and adding interior details. At this point I can assemble a fairly complex building in an evening.
Thanks for commenting Thomas! The Dave Graffam models are a wonderful terrain option. Not only are they extremely affordable, but they are easy to customize and modify. I'm sure you will really like them when you get a chance to build them. Take care!
Glad to help! They are a treat to construct and allow for so much customization. With just a few crafting skills they can not be beat for the money. Love 'em!
Dan Buman You did a really good job in mounting them on the foamboard, they look very convincing. I also enjoyed the videos you made showing how you managed it. I have a question however. Do you know any other websites that offer paper templates for buildings appropriate for WW2 Western Europe? I’ve looked around and found lots of things perfect for fantasy/sci - fi, but not many for historical wargaming.
Really makes a difference after you've gone to that extra effort Dan. I used to have Old West type buildings in printed card. God knows where they are now haha!
@@danbuman8422 That definitely seems to be the case. Thankyou for letting us know about it though because (at least for me) it has gone over my head. I would definitely get my grubby hands on some foamboard, like you did though.
Thanks Phil! It's a great way to add a large amount of buildings to your table at very little expense. In addition, the kits are very easy to customize in order to create your own unique structures.
Very, very nice! Very talented and loved following your commentary. As I am currently working on some similar foamboard terrain, I have a question: How does the nail filler putty hold up as a coating for the exposed foam core? I was considering using spackle (drywall repair) but was concerned with adhesion. If the wood putty works well, I may go with that instead. Thanks and keep up the great work.
Rob Hamper Thanks Rob! The wood putty adheres very well and is quite durable. Spackle would probably work fine as well but I believe the wood putty is more durable and, if used in the tube form, it is easy to control while applying. This helps keep your printed surfaces from getting the wood filler on them. Have fun!
@@danbuman8422 I was so impressed with this that I shared it on my blog site hope that's OK: www.valhallagames.net/index.php I do have one slightly unrelated question, the lighting in your video is outstanding can I ask what you use for that? I hope to do more good quality videos myself.
Hey Dan, Wonderful job. Wondering how you got such clean angles on the foam core at the points where the foam pieces meet together under the tip of each roof. Any advice would be appreciated. DO you use a tool. I can cut at angles, but they aren't as lean as the ones ni your video. Thanks!
Thanks Anthony! I just use a very sharp hobby knife and gently cut through. It's more of an art than a science unfortunately. I eye ball the angle and be sure to use a new blade to get a clean cut. Sorry to not be of more help!
Thanks! I used an Elmers Glue glue stick. It holds well, dries clear and doesn't bubble or wrinkle the paper. www.discountschoolsupply.com/Product/ProductDetail.aspx?domainredirect=true&product=1514&xes=237530000ESC&gclid=Cj0KCQiAsdHhBRCwARIsAAhRhsmVKXJUjWh9wWRmh57d4CcEH5JsM5BfCpQ550NrtgM6itFSxd5NXT4aAjpeEALw_wcB
very cool! what app do you have to open them with to modify/print? thanks for sharing some of the assembly tricks as well. if you add to your table, consider taking some stills or a video tutorial. I'd be interested in seeing how its done, and may actually do something like this too. :)
Thanks Jankmaster! I use Adobe Acrobat to manipulate the files and that works very well. The next time I build one I will try to take some stills to demonstrate the process. I have learned a lot of techniques through trial and error that really make them easy to make. Putting the card stock prints onto foam core, making the roofs removable, and adding interiors created some challenges at first.
I'm not sure I understand what you are asking. The brick walls in the video are always from the building kit that the walls are used with. I just print the wall of the building out without layering on the plaster and then cut it into strips to get the wall height that I want. That way the brick walls always match the building that I put them with. Let me know if that does not answer your question :)
YOU ARE RIGHT ABOUT IT TAKING TIME EVEN THE OTHER KITS THAT COST WAY TOO MUCH ...YHIS IS WHAT I BEEN DOING FOR 3 YEARS GLUING WLL PAPER THAT LOOKS IKE BRICKS THIS IS SO MUCH BETTER..
Hi Edward. The bases are made from artist panel that I got from Hobby Lobby in the US www.hobbylobby.com/Art-Supplies/Painting-Canvas-Art-Surfaces/Art-Paper-Boards/Ampersand-Smooth-Gessoed-Artist-Panel---16%22-x-20%22/p/4666 It is essentially hardboard that has a coating (primer) on one side. This material is very sturdy and, with the primer coating on one side, I can apply my glue and spackle to that side and get nearly zero warping. Hope that helps!
Hi Dan! Just discovering these for bolt action and chain of command and I am really excited to make some myself! Could you tell me some of the specific names of the buildings you purchased? The ones I'm finding on the sight are a little more "dungeons and dragons" than mid century.
Hi Shane and thanks for watching! They were great for Bolt Action and offer tons of opportunity for kit bashing. These are the kits I used for everything in the videos that I have made: The Cabin, Longhouse, Butcher's Shop, Fletcher's Shop, and the free Coach House. The ruined kits that I purchased were the Ruined Church and the World War Ruins #4. They appear very dungeons and dragons at first glance, but remember that many of the buildings in Europe at that time were essentially late medieval period structures, especially in the rural area and villages. By selecting the "skin" choices in the kits that fit that time period, you can make everything that I made. Let me know if you have more questions! It looks like his new kit The Storehouse #2 would be an excellent choice as well. I do not yet have that one.
On the Facebook group they have been commenting about his absence as well. Someone did mention that he has been somewhat active on his Patreon page, so he is still alive!!
I belong to Patreon, and if you check Graffam's page you'll find that his last post was on September 10, 2019, which coincides with the last time I received an update to a project he was working on (new textures). He stopped updating his Patreon members at that point. I was receiving regular updates prior to that date. Also, Dave was very good at responding to comments on Patreon and answering emails I'd sent, but nothing has shown up on any of his web sites nor has he written back to me. Patreon creators need to keep their followers informed, but he has fallen far behind. It's for these reasons that I am concerned about his well-being. Dave is a pretty darn nice guy and all I can do is hope he's okay.
Gary N. Thanks for the information Gary! Hopefully he is well and will be responding soon to his fans. I too have found him to be very active with his customers and fans. His silence is disconcerting for sure...
I live in the US, so I use 3/16" for the walls (which is about 5mm) and 1/8" for the roofs (which is about 3mm). I use the thinner for the roofs so they are more in scale with the thicker stone/brick walls and look more realistic. Hope that helps!!
Very interesting and creative use of some old school modeling techniques, mixed with updated materials. Lots of good ideas here-thanks.
Thanks for the kind words and I am glad if the video offered some inspiration for your own projects :)
Fantastic video. It was great to see someone use the printable stuff and then use foam board to strengthen it and then show them finished.
Great inspiration!! :)
Thank you and thanks for watching!
12:48 i could watch these forever, your creativity with these pdf kits is awesome and a huge inspiration.
Thanks for the kind words!! I'm glad you found it interesting :)
Now I'm retired I have been making up sets of 20mm and 54mm 'toy soldiers' to give away to less well off folks, I have been trawling the net for freebie papercraft buildings and modifying them (mirror image to get interiors etc) and re-scaling them. That's a lot of work and these look like what I have needed! Thanks for posting.
Sounds like a wonderful project! You are good people :). These kits are outstanding. Good luck to you!
I would like to second the comment below about seeing a "how to" video. I've been using Dave Graffam buildings for some time, but never thought to mount the printed pages on foam core. I'd like to see how you did that because what you have shown here looks really good! Thank you for sharing your creativity.
Thanks for the kind words! I don't have a setup that would allow me to make a high quality "how to" video. I did post a video on my channel that shows some of the techniques and materials used in one of my Dave Graffam conversions. I believe it is called "Dave Graffam Ruined Church Conversion for Bolt Action part #1 and part #2". That might be of some assistance. Let me know if you have any questions!
@@danbuman8422 I found those two videos shortly after I posted my comment. Thank you for pointing them out. I look forward to watching those and learning how you handled joins and corners with the foam core.
@@earlkriewall7251 Excellent! Let me know if you have any questions after watching. Take care
@@danbuman8422 I've probably watched the first video of ruined church conversion three times now. And I've found a small building to use as a "guinea pig". There is one question that I have. Many of the Dave Graffam buildings have two walls joined as one image. Would you recommend cutting those apart and gluing them to the foam core? Or, do you cut a 5mm channel in the foam core to one side of the corner where the corner would be? Thank you again for these videos.
@@earlkriewall7251 After printing out, I cut any walls apart that are joined before gluing to the foam core. Then to join two walls together at a corner of the building, I make a 5mm notch in one of the two wall sections. Only removing the inside card covering of the foam core and the foam layer itself, leaving the outside intact. This allows for a smooth corner joint. My other video on Dave Graffam buildings, I believe, shows a corner a little more clearly as I describe the process. I hope that helps!!
Some terrific buildings there Dan...., nice job!! 🙂👍
Thanks! Much appreciated! They are a lot of fun to make.
Great work Dan,superb quality,
regards,
Terry.
Thanks Terry! They were really fun to customize once I got the hang of it
These are excellent, I’ll definitely try them out using your foam board method.
Thanks Chris! These buildings lend themselves well to the foam core method. Have fun!!
Really great looking pieces. I love all the interior printouts especially. Thanks for posting this video.
Thanks James! I appreciate the comment :)
Spackling, it's called spackling. Brilliant. Love the adaptability of your buildings. Great ideas and execution.Thanks for the video.
Thanks for watching and for the comment!
Excellent buildings, you have made a fantastic job on them too. A cheap, but effective way of creating a lot of buildings.
Thanks! They are an economical way to have some quality buildings. The ability to customize them is a big plus as well.
Really nice work Dan! Very impressive!
Thanks Rob! Much appreciated Sir!
Awesome stuff!!! Very creative. Thanks for sharing.
Thanks! They are great kits to go crazy with :)
Very nice looking buildings 👍
Thanks! They are tons of fun to make.
Dan Buman yes much like the superquick buildings i use for 1/72 scale.
Great work especially the destroyed building!
Thanks! I had lots of fun making that one :)
Fantastic work Dan, I love the destroyed building, nice one mate, Garry
Thanks Garry! Cheers
Very cool! Love the bristles idea.
Thank you! These kits can really allow your creativity to run wild. I had so much fun making these!
These look fantastic and this is exactly what I’ve had in mind to do with cardstock buildings to make them more durable. I’ve actually got A4 sheets of adhesive printer paper to eliminate the need for glue, so I can just place the print-outs on the foam board.
You’ve given me some great ideas and guidance with this video - love the damaged buildings. I’ll definitely order a load of these files, thanks for showing these.
Thanks Lee! These really turn out well and are fun to customize. Let me know if you have any questions, as I have learned a lot of techniques that help improve the process of mounting these on foam core. Good luck and share your results when get to try them out :)
Thanks very much Dan. We’re in the process of selling & buying a house so once that’s all done and we’re settled I’m going to make an effort to start building terrain as I currently don’t have any. I’ll certainly be coming to you for advice.
Superb job on the buildings Dan they look great! The destroyed building is really impressive. You've been very busy! Thanks for sharing on this.
Keith
Thanks Keith! They are a little addictive. I have a lot of ideas about ways I can customize them and it's fun to see how far you can go.
This gives me some inspiration. Would love to see a step by step. Great job!
Thank you! I might try a tutorial of sorts at some point. Even sharing some of the basics might help others give this a try.
@@danbuman8422 please do!
Nice work Dan,have subscribed, very fascinating show.
Terry
Thanks Terry! Glad you enjoyed it :)
Those are great Dan! Amazing skills!
Thanks Travis!
Wow Dan thanks for sharing this and how you built those buildings. Been wanting to increase the number of buildings for the upcoming Normandy and Market Garden Campaigns and this might fit the bill.
Thanks Rusty! They are fun and easy to build and can really fill a table in short order on a budget :)
@@danbuman8422 I've been looking at the different kits, which ones would you suggest for Normandy and Other European campaigns
I chose all of mine to fit Normandy and they work well for that. These are the ones I recommend:
The Fletchers Shop is the two story building that I show that I modified to be a one story or two story building and put the French signs on the walls. Great kit though the more complex roof makes it more challenging to mount on foam core.
The Butchers Shop is the other two story building that I show that has the removable floor to access the lower level. Probably one of the easiest kits to build.
The Long House is the livestock building I made. Easy kit with some wonderful texture choices.
World War Ruins #4 is the damaged building that I show. Another easy kit with lots of customizing potential.
The Ruined Church I did not show because it is a little large to show while running the recorder but is an excellent piece. This is a more challenging piece but again lots of variety and worth the effort.
The Carriage House is the free kit that I show at the beginning of the video that I used for three different buildings. Easy kit and a good chance to give them a try.
The Cabin is a good kit to have. It is actually designed to have an accessible interior so it has a variety of flooring that I used in some of the other buildings. I did build this kit to make buildings but it is probably one of the best to use for parts on your other buildings. The damaged roof on the ruined building came from this kit.
@@danbuman8422 Thank You Sir, that is very helpful. You should share the video with the Musty Wargamers page and idicbeer page.
@@Helcarexe26 Glad to help! I will try to share the video. I'm not very techy :(
Really nice job!
Thanks Robin and thanks for watching :)
Really impressive my friend and you have a nice demeanour too, I really enjoyed this so much. Well done!
Thanks for the kind words! I hope you found it helpful!
Man, what a wonderful world you made me discover! Nicely done, I just want to start building!
Thank you! They are tons of fun to build. After you get comfortable with some basic techniques, you can really let your imagination run wild. For very little expense, you can create loads for cool and unique structures. Have fun!!
@@danbuman8422 I've tried paper stuff before but the way that you reinforced them and so cleverly stuck them... Wow, sometimes you just need another set of eyes to find a treasure. Will have fun for sure, thanks!
Downloaded the freebie and built it in an hour....I'm hooked! Thanks
They are really incredible. With just a few kits, you can customize a large variety of buildings. I found it quite addicting :)
Fantastic buildings
Thanks I appreciate you watching! LOVE your channel :)
Nice work Dan.
Thanks Ken! They are a ton of fun to make :)
You sir are an inspiration! Thank you and well done. Well done!
Thank you! I am glad you found it useful!
Outstanding I have been inspired. Thank you
Thanks for the support! I'm glad you found it helpful :)
Great work you have done there with these designs. It’s clear you put some time and thought into these kits. I used something similar when I first started the marvel game and they do look really good with the printed details on the exterior. Great stuff.
Thanks Palmer! I definitely learned a lot of techniques that help the build go smoothly. There rare some challenges to modifying the kits to be mounted onto foam core and adding interior details. At this point I can assemble a fairly complex building in an evening.
These look really nice.
Thanks! They make for some nice buildings that don't break the bank.
These are great. Love the ruined building.
Thanks Matthew! They are wonderful kits to customize and let your creativity come out :) I appreciate the comment!
They look amazing definitely will have to check them out
Thank you! They are definitely worth a look :)
Best buildings ive ever seen....WOWZER
Thanks Richard! They are pretty easy to customize and extremely affordable.
Looking good Dan . Regards Gav.
Thanks Gav!
Wonderful buildings
Thanks and thanks for watching!
these are really excellent models. I have several of these but i havent gotten around to building them yet
Thanks for commenting Thomas! The Dave Graffam models are a wonderful terrain option. Not only are they extremely affordable, but they are easy to customize and modify. I'm sure you will really like them when you get a chance to build them. Take care!
These look amazing. I’m definitely going to look into getting some of these. Thanks for the recommendation.
Glad to help! They are a treat to construct and allow for so much customization. With just a few crafting skills they can not be beat for the money. Love 'em!
Dan Buman You did a really good job in mounting them on the foamboard, they look very convincing. I also enjoyed the videos you made showing how you managed it. I have a question however. Do you know any other websites that offer paper templates for buildings appropriate for WW2 Western Europe? I’ve looked around and found lots of things perfect for fantasy/sci - fi, but not many for historical wargaming.
I really need to stress to you here, the kit was good, but your execution of it was perfect!
You are too kind. Thanks for watching!
Cool! Weekend project accepted (assuming I
get my printer working that is). Thanks for posting this.
Thanks for watching! I hope you were able to make some buildings of your own :)
Really makes a difference after you've gone to that extra effort Dan. I used to have Old West type buildings in printed card. God knows where they are now haha!
Thanks! I was a little surprised how far you can take card stock buildings. With a little effort you can make some really nice terrain.
@@danbuman8422 That definitely seems to be the case. Thankyou for letting us know about it though because (at least for me) it has gone over my head. I would definitely get my grubby hands on some foamboard, like you did though.
Great looking buildings, they look superb and realistic!
Thanks Phil! It's a great way to add a large amount of buildings to your table at very little expense. In addition, the kits are very easy to customize in order to create your own unique structures.
These look great and the price is fantastically low! I wish I had found your review of the kits earlier!
Thanks Aaron! They are great kits and really allow you to make some wonderful buildings on the cheap.
Very nice. I have been testing out MDF laser cut buildings which are actually pretty nice, but these look cool
Thanks! There are some amazing MDF buildings out there. What I like about these is the low cost as well as the customization opportunities.
Bravo! Thanks for the tips. These look great!
Thank you and thanks for watching!
Great stuff, though I suggest putting the second story floor on the first story walls, that way you don’t have the walls in your way for gaming
great review, will definitely take a look
Thanks! They are well worth your time to check out.
Just discovered this. Awesome
Thanks for the comment! They are wonderful kits and offer a real "sandbox" of possibilities.
Dollar store foam ok.; super glue?Im going to try the free ones first
@@davrosdavros7198 The free ones will get your feet wet and show what can be done. Give it a go!
Very nice.
Thank you and thanks for watching!
thank you very much for this video. Very nice job. Thanks to you, i'll save money. i'll go to buy foam core..
Glad to be of some help!! They are lots of fun to make :)
These look great Dan. I hadn’t heard of them so that’s an excellent tip. Thanks for sharing. 🙂
Thanks for watching! They are wonderful kits :)
Thank you for a very informational and entertaining video. New subscriber!
Thanks Dave!!
Very, very nice! Very talented and loved following your commentary. As I am currently working on some similar foamboard terrain, I have a question: How does the nail filler putty hold up as a coating for the exposed foam core? I was considering using spackle (drywall repair) but was concerned with adhesion. If the wood putty works well, I may go with that instead. Thanks and keep up the great work.
Rob Hamper Thanks Rob! The wood putty adheres very well and is quite durable. Spackle would probably work fine as well but I believe the wood putty is more durable and, if used in the tube form, it is easy to control while applying. This helps keep your printed surfaces from getting the wood filler on them. Have fun!
They look great. I think I’ll be getting a few of these. Nice one buddy 🙂
Thanks Leon! They are really nice kits and a great way to fill a table with a variety of buildings on a budget.
Great Stuff 👍
Thank you!
Excellent Content!
Thank you!
This is great!! Thank you for showing!!
Thanks for the kind words and thanks for watching!
Great work, How has the algorithm just shown me this when you did it so long ago?
Great stuff !
Great job, thanks!!
Thank you and thanks for commenting!
@@danbuman8422 I was so impressed with this that I shared it on my blog site hope that's OK: www.valhallagames.net/index.php I do have one slightly unrelated question, the lighting in your video is outstanding can I ask what you use for that? I hope to do more good quality videos myself.
These are brilliant, a quick wash to " weather" them and bingo !
Thanks Tim!
@@danbuman8422 would a wash make the paper parts soggy and damaged?
@@groundbeef6156 I wouldn't use a liquid wash. It would definitely warp the paper.
Nice. Good job.
Thanks Ken! Thanks for watching :)
Brilliant!
Thank you and thanks for watching!!
Hey Dan, Wonderful job. Wondering how you got such clean angles on the foam core at the points where the foam pieces meet together under the tip of each roof. Any advice would be appreciated. DO you use a tool. I can cut at angles, but they aren't as lean as the ones ni your video. Thanks!
Thanks Anthony! I just use a very sharp hobby knife and gently cut through. It's more of an art than a science unfortunately. I eye ball the angle and be sure to use a new blade to get a clean cut. Sorry to not be of more help!
I applaude you, you talented son of a gun!!! A+
These are sweet dude, I wish you did a tutorial video or a making of!
Thanks! As my video and tech skills improve, I hope to do one at some point!
I was wondering if his sci fi kits (specifically the Babylon and hanger kits) were worth it and this video definitely shows that they are. Thanks man
These are wonderful kits and so affordable. Glad you found the video useful! Take care
Fantastic builds! What glue did you use for the foam core?
Thanks! I used an Elmers Glue glue stick. It holds well, dries clear and doesn't bubble or wrinkle the paper. www.discountschoolsupply.com/Product/ProductDetail.aspx?domainredirect=true&product=1514&xes=237530000ESC&gclid=Cj0KCQiAsdHhBRCwARIsAAhRhsmVKXJUjWh9wWRmh57d4CcEH5JsM5BfCpQ550NrtgM6itFSxd5NXT4aAjpeEALw_wcB
*Nice video again! (Warped Clips)*
Thank you and Thanks for watching!
very cool! what app do you have to open them with to modify/print? thanks for sharing some of the assembly tricks as well.
if you add to your table, consider taking some stills or a video tutorial. I'd be interested in seeing how its done, and may actually do something like this too. :)
Thanks Jankmaster! I use Adobe Acrobat to manipulate the files and that works very well. The next time I build one I will try to take some stills to demonstrate the process. I have learned a lot of techniques through trial and error that really make them easy to make. Putting the card stock prints onto foam core, making the roofs removable, and adding interiors created some challenges at first.
Fantastic
Thanks so much!!
Anyone know where the brick card can be found?
I'm not sure I understand what you are asking. The brick walls in the video are always from the building kit that the walls are used with. I just print the wall of the building out without layering on the plaster and then cut it into strips to get the wall height that I want. That way the brick walls always match the building that I put them with. Let me know if that does not answer your question :)
YOU ARE RIGHT ABOUT IT TAKING TIME EVEN THE OTHER KITS THAT COST WAY TOO MUCH ...YHIS IS WHAT I BEEN DOING FOR 3 YEARS GLUING WLL PAPER THAT LOOKS IKE BRICKS THIS IS SO MUCH BETTER..
It is also nice to build and customize these kits to make them both unique and the way you want them!
Rooves?
Are the building bases also made with foam core?
Hi Edward. The bases are made from artist panel that I got from Hobby Lobby in the US www.hobbylobby.com/Art-Supplies/Painting-Canvas-Art-Surfaces/Art-Paper-Boards/Ampersand-Smooth-Gessoed-Artist-Panel---16%22-x-20%22/p/4666
It is essentially hardboard that has a coating (primer) on one side. This material is very sturdy and, with the primer coating on one side, I can apply my glue and spackle to that side and get nearly zero warping. Hope that helps!
Which building is the livestock building? ....i looked on Dave Graffams site and couldnt find it .....great job by the way
Thanks Stephen! I believe it is called the Long House. Let me know if you still can't find it and I will double check 😊
@@danbuman8422 thx for the reply
Hi Dan! Just discovering these for bolt action and chain of command and I am really excited to make some myself!
Could you tell me some of the specific names of the buildings you purchased? The ones I'm finding on the sight are a little more "dungeons and dragons" than mid century.
Hi Shane and thanks for watching! They were great for Bolt Action and offer tons of opportunity for kit bashing. These are the kits I used for everything in the videos that I have made: The Cabin, Longhouse, Butcher's Shop, Fletcher's Shop, and the free Coach House. The ruined kits that I purchased were the Ruined Church and the World War Ruins #4. They appear very dungeons and dragons at first glance, but remember that many of the buildings in Europe at that time were essentially late medieval period structures, especially in the rural area and villages. By selecting the "skin" choices in the kits that fit that time period, you can make everything that I made. Let me know if you have more questions!
It looks like his new kit The Storehouse #2 would be an excellent choice as well. I do not yet have that one.
@@danbuman8422 thank you!
How did you put it together? Do you have a video on it?
Thanks for watching. I made a basic video showing some of my techniques and products used. This is part 1: ua-cam.com/video/OGLbGXV1Gpg/v-deo.html
amazing
Thank you and thanks for watching!!
Dave Garffam dropped from public view back in September 2019, and nothing has been heard from his since then. I wonder if he's even alive?
I think you mean "Graffam," but yes, he doesn't even respond to Comments or personal emails anymore. I hope he's okay.
On the Facebook group they have been commenting about his absence as well. Someone did mention that he has been somewhat active on his Patreon page, so he is still alive!!
I belong to Patreon, and if you check Graffam's page you'll find that his last post was on September 10, 2019, which coincides with the last time I received an update to a project he was working on (new textures). He stopped updating his Patreon members at that point. I was receiving regular updates prior to that date. Also, Dave was very good at responding to comments on Patreon and answering emails I'd sent, but nothing has shown up on any of his web sites nor has he written back to me. Patreon creators need to keep their followers informed, but he has fallen far behind. It's for these reasons that I am concerned about his well-being. Dave is a pretty darn nice guy and all I can do is hope he's okay.
Gary N. Thanks for the information Gary! Hopefully he is well and will be responding soon to his fans. I too have found him to be very active with his customers and fans. His silence is disconcerting for sure...
What mm is the foamboard you use?
I live in the US, so I use 3/16" for the walls (which is about 5mm) and 1/8" for the roofs (which is about 3mm). I use the thinner for the roofs so they are more in scale with the thicker stone/brick walls and look more realistic. Hope that helps!!
@@danbuman8422 thanks
I BEEN WANTING THIS IS SO GREAT,....I BUY THE FOAM BOARD AT DOLLAR STORE FOR A DOLLAR...AND THIS O YA..REMOVABLE ROOFS I AM IN BUDDY
It is an awesome way to get a lot of affordable buildings that are customized to your needs :)