We use the tig welder to remove dowels and broken bolts for over 30 years now. Never had seen honing the rods to increase rod bearing clearance. That would affect the crush 🤔. Piston coating looked great. Keep making the Ford videos. Thanks from Texas USA.
Kyle . Retired maintance welder ,all my life . Put down a flat washer slightly smaller than stud , when stud is broke off below surface. . Makes it easier to weld . Then drop the nut on top and weld . Nut to stud. Works awesome on threaded bolt as you gab a wrench an unwind the broken bolt out. Even better if there is a little bolt sticking up ,use the correct washer to snugly fit around bolt . as you get a strong weld to washer. Then can if you have to grind washer flat and smooth , drop the nut on top . Try it you will like it lol. Never miss a video of your , thanks
Muriatic acid works great for burning melted aluminum off cylinder walls. Do keep the container sealed up though as the fumes will rust any bare steel within 100 yards.
My old boss used it to clean the oil/grease spots in our lift bays. Just dumped a little bit down push it around with a broom then spray it out the door with water it cleaned the floors very well.
@@danmyers9372 There are some nice chem storage cupboards available that aren't super expensive. We use them in labs, and I have two in my shop at home with one venting outside for acids and bases, and one being sealed mainly for solvents and flammables. I personally find that to be a better solution than having things outside where temperatures, weather and such can cause other problems to either containers or the chemical inside. A bit geeky, but it's nice to work in a shop where things are easily accessible but also safe.
Kyle,in the mid 80's,a cartoon that was popular was called the smurfs, and they where blue,similar blue as your car.blueberries,are dark blue,purple color,so,would it be more practical, or fitting I guess,to name your car,after a smurf, and the names are amazing.
I do like the look of the belt drive system. Me, I have always been a double roller cam guy, but I am also old. I do like this new tech system. I am not afraid of belts. Thanks Kyle!
we always jb welded a screen wire over the big oil return holes incase of lifter expolsion dropped bolts or what ever it was a step bigger than window screen
One tip when mounting the water pump. On the 4 long bolts beside putting thread sealer on the bolts. Also put heat shrink tubing on the shafts . To help bolts from corroding to water pump. Makes it easier to remove on next tear down.
Just a bit of advice, if you take the nut and use a countersink on the drill press it will open so you can get in deeper and put more heat in the bolt/pin
word of the wise... don't ever let that "muriatic acid" stay in the shop, no matter how tight you think its sealed, it will rust everything. put it outside away from anything metal (in a safe place)
That timing set is badass! I used a Danny b on my small block ford. I had the stock style cover with a motor plate and the Danny b came with perfect sized spacers and it went right back in the same place. It worked perfect.
I never store Muriatic where you have things that can rust, it can form vapors that will rust every piece of steel in small building. Should not if it is sealed but I just err on the same side and don't store it where things can rust.
Look up the term " dimensional upset" in metallurgy. If you heat metal that is constricted from expanding, it will, actually shrink when cooling. Fun fact for ya.
Kyle Morris ya man I used Muriatic Acid on my chrome valve covers. Let them soak over night, gave them a light scuff and painted them. The paint has been on for 20 years now. I can not stand chrome on anything
Happy New Year Kyle! You are a great guy chip off the old block, your mom and dad should be proud of what you have become. I like that your kind of a Ford guy me to but I like all brands. I have a 68 Ford F250 2x4 that Im restoring to an F150 4x4 it is actually in very good condition already but I want to make it pristine. It has an Fe motor in it right now I don't know if I want to say with Fe or go 385 family or even maybe a Winsor. I think I want to go with a 4 speed auto so that could play into it a little bit. Those old c6 trans are bullet proof but just like turbo 400 they are hard on the gas milage. You and your family have a great new year and God Bless.
I'm happy to see that you had the big end of the rods honed i thought the same thing when you said ,the bearings were to only bearings available for you're set-up. That innovators west belt drive looks slick cant wait to see it complete and in the car .
I figured that belt drive would be much more than it was, now if they made a thin alumunum cover that removed with 4 little screws for street driving/cruises that would be icing on the cake
Awesome Kyle. Glean all of the knowledge from your dad and the people around in that shop you can and hone your skills. Then pass to your little ones plus what you learned. It’s awesome to watch your program. Especially as a sbf glutton that I am lol. Coyote maybe? Anyways keep charging man. Use your resources available and don’t feel bad about it from the haters. And that adidas hat was mint. Adidas>nike lol.
Good point if you stay within the book dimensions of the big end housing bore you are usually ok but loosing crush is not something I want on an engine that’s gonna spin high rpm and high loads
Love to see the ford content, but it would even better to see you move to a 9.5” block and run 7’s……. Or even a 10.3 motor and coast into 6’s with ease….
The old school circe track engine builders had a means of clearancing bearings before the different bearings became available. It was a specialty reamer. I have no idea who made them. Most of these people built Offenhausers previously. That generation is gone to us anymore.
Did you oversize the big end of the rod? Or just run it on the high side of the spec? I am asking because my concern would be reducing the bearing crush itself... beautiful belt drive, though.
Not necessarily stronger than the chain or gears. But more forgiving of rapid RPM change (like the 2step or rev limiter) thats one of the reasons the cam dowel sheared. That and you’re supposed to use two dowels not one on a high RPM solid roller which i did not do.
I seen in a previous video he has some Trick flows. The exhaust looked ported. I tried to identify them on the trick flow website, but i needed more info. Hopefully he will reply or show us.
The belt is about the same strength as the chain. But the real advantage this set up has is found in the “stretch” that the belt does have, the harmonics dampening affect of the belt, and it makes it extremely easy to adjust cam timing or change cams all together.
Something I don't really get, is that underlining of BILLET. I get that some parts work very well in billet form, are pretty cool and are also expensive. I guess my problem with it is, that it kinda comes across a bit tacky like an "American Chopper" vibe. Maybe it's just me being weird, it was just what stuck me as I read the video title as it's not your style at all. Otherwise cool stuff Kyle.
When I was a Kid, I had a thing for 351 Cleveland’s. I never see them in drag racing though. Were they just a POS or what’s the reason nobody runs them?
If u can't find certain Ford brackets can't ya just bust aomw out on somw them cnc machines back there I mean if u cab score the measurements of the brackets I mean u could program the cnc and make ur own I mean that would be most logical idea
I get what y’all doing with the removing the plating on hardware for welding, but think it appropriate to warn y’all that this could result in hydrogen embrittlement, that can result in popped bolt heads, etc., so, don’t do it on critical hardware for installation.
I'm glad to see that you are a true Ford fan. It's a rare thing these days.
it not rare it a lot of ford fan
@@mr.shadowfall602 - It’s very rare in the drag race community discounting the new Coyote platform.
@@danmyers9372
It's rare because we like to go fast and not break down all the time hehe
We use the tig welder to remove dowels and broken bolts for over 30 years now. Never had seen honing the rods to increase rod bearing clearance. That would affect the crush 🤔. Piston coating looked great. Keep making the Ford videos. Thanks from Texas USA.
Doing the angel "aaaaah" like you Dad is hilarious Kyle. That belt drive looks great.
And referring it to it as a “Billy bad boy”. The apple definitely does not fall far from the tree here.
Kyle . Retired maintance welder ,all my life . Put down a flat washer slightly smaller than stud , when stud is broke off below surface. . Makes it easier to weld . Then drop the nut on top and weld . Nut to stud. Works awesome on threaded bolt as you gab a wrench an unwind the broken bolt out. Even better if there is a little bolt sticking up ,use the correct washer to snugly fit around bolt . as you get a strong weld to washer. Then can if you have to grind washer flat and smooth , drop the nut on top . Try it you will like it lol. Never miss a video of your , thanks
Muriatic acid works great for burning melted aluminum off cylinder walls. Do keep the container sealed up though as the fumes will rust any bare steel within 100 yards.
My old boss used it to clean the oil/grease spots in our lift bays.
Just dumped a little bit down push it around with a broom then spray it out the door with water it cleaned the floors very well.
You can never fully reseal an open container. It must be stored away from any bare metal preferably outdoors.
@@danmyers9372
There are some nice chem storage cupboards available that aren't super expensive. We use them in labs, and I have two in my shop at home with one venting outside for acids and bases, and one being sealed mainly for solvents and flammables. I personally find that to be a better solution than having things outside where temperatures, weather and such can cause other problems to either containers or the chemical inside.
A bit geeky, but it's nice to work in a shop where things are easily accessible but also safe.
Kyle,in the mid 80's,a cartoon that was popular was called the smurfs, and they where blue,similar blue as your car.blueberries,are dark blue,purple color,so,would it be more practical, or fitting I guess,to name your car,after a smurf, and the names are amazing.
Its nice to see you keeping it all ford.
good move om the timing belt upgrade.
I do like the look of the belt drive system. Me, I have always been a double roller cam guy, but I am also old. I do like this new tech system. I am not afraid of belts. Thanks Kyle!
Giving some love
Paint the block Ford blue. It is easier to find leaks than when it is painted black.
I knew there was a reason why Ford never has black engine blocks.
we always jb welded a screen wire over the big oil return holes incase of lifter expolsion dropped bolts or what ever it was a step bigger than window screen
Bad Boy parts on a Bad Ass SBF they are little but make such good power love them little engines. Thanks for Video God Bless you and the Family.
Happy New Year 🎉 thank you for the content, so happy you’re racing a Ford and using Ford power !
Fancy! Super stoked for the long block video
One tip when mounting the water pump. On the 4 long bolts beside putting thread sealer on the bolts. Also put heat shrink tubing on the shafts . To help bolts from corroding to water pump. Makes it easier to remove on next tear down.
Just a bit of advice, if you take the nut and use a countersink on the drill press it will open so you can get in deeper and put more heat in the bolt/pin
@@1960fl i like that, ill give it a try next time!
Or just weld a washer and then something to the washer
word of the wise... don't ever let that "muriatic acid" stay in the shop, no matter how tight you think its sealed, it will rust everything. put it outside away from anything metal (in a safe place)
Agreed! It happened to me years ago.
Yeah pools taught me that crap
Yep, you wouldn't think it do, but it do.
When I was a kid I was messing with it in a coffee can and left it till the next day and the coffee can was gone and the concrete was really clean
That timing set is badass! I used a Danny b on my small block ford. I had the stock style cover with a motor plate and the Danny b came with perfect sized spacers and it went right back in the same place. It worked perfect.
I never store Muriatic where you have things that can rust, it can form vapors that will rust every piece of steel in small building. Should not if it is sealed but I just err on the same side and don't store it where things can rust.
Look up the term " dimensional upset" in metallurgy. If you heat metal that is constricted from expanding, it will, actually shrink when cooling. Fun fact for ya.
Thank you as always man for having some great content and providing 15 min or so of peace amongst all the chaos in the world
Great looking engine. Thanks
Lookin good buddy that belt system is sweeet pretty cool you can use the chevy stuff
Lookin good! That's a fancy piece you are putting on a Ford. Lol!!
$1200!!!
@danmyers9372 😳
Happy New Year, Kyle! Thanks for the content, looking forward to the future!
HNY, Kyle, and family, y'all rock! Peace 🤘 🍻 💨 ❤
Kyle Morris ya man I used Muriatic Acid on my chrome valve covers. Let them soak over night, gave them a light scuff and painted them. The paint has been on for 20 years now. I can not stand chrome on anything
Nice when a plan comes together! That thing's going to me mint!
Interesting , really nice timing cover. Thanks for the video.
Seeing that your making smart upgrades, I'd name the car brainy smurf😂😂
Don't forget more details on the oiling system. How many stages and does it draw a vacuum?
Cool new timing set up
Much love from Guam! 🤙🏾🇬🇺🍻
Nice work on the broken dowel.👍
Looks a lot like my Danny Bee belt drive
Happy New Year Kyle! You are a great guy chip off the old block, your mom and dad should be proud of what you have become. I like that your kind of a Ford guy me to but I like all brands. I have a 68 Ford F250 2x4 that Im restoring to an F150 4x4 it is actually in very good condition already but I want to make it pristine. It has an Fe motor in it right now I don't know if I want to say with Fe or go 385 family or even maybe a Winsor. I think I want to go with a 4 speed auto so that could play into it a little bit. Those old c6 trans are bullet proof but just like turbo 400 they are hard on the gas milage. You and your family have a great new year and God Bless.
I'm happy to see that you had the big end of the rods honed i thought the same thing when you said ,the bearings were to only bearings available for you're set-up.
That innovators west belt drive looks slick cant wait to see it complete and in the car .
Great content thanks for sharing
Keep up the Ford videos. I run a SBF in my hot rod.
Happy New Year Kyle. Keeping up with your dad is tough as he has a head start.
Pool acid, same thing but probably cheaper.
I figured that belt drive would be much more than it was, now if they made a thin alumunum cover that removed with 4 little screws for street driving/cruises that would be icing on the cake
You don’t think $1200 for a cam drive is a lot?
@ nope, $1200 is a fair price imo. Lot of R&D, quality machining and materials in that box, shit didnt come from Yemu
Awesome Kyle. Glean all of the knowledge from your dad and the people around in that shop you can and hone your skills. Then pass to your little ones plus what you learned. It’s awesome to watch your program. Especially as a sbf glutton that I am lol. Coyote maybe? Anyways keep charging man. Use your resources available and don’t feel bad about it from the haters. And that adidas hat was mint. Adidas>nike lol.
Glad you posted new content today.
Kyle, thanks for the video!
By opening the big end of the connecting rod. Do you know how much it reduced your bearing crush?
Good point if you stay within the book dimensions of the big end housing bore you are usually ok but loosing crush is not something I want on an engine that’s gonna spin high rpm and high loads
Signs of a good mechanic is getting out of jam, like that broken dowel pin.
Looks great Kyle.
I like the chill lofi music
Nice work Kiel what block did you start with?
Love to see the ford content, but it would even better to see you move to a 9.5” block and run 7’s……. Or even a 10.3 motor and coast into 6’s with ease….
Yeah a 427 turbo Windsor sounds fun. Man O war block.
Looks great Kyle! Does this mean sick week is a possibility?
What is the perfect oil clearance in a certain application? Hard to say unless you do a lot of the same. Just my opinion.
DIDDY GOT LOTS OF LUBE IF YOU EVER RUN OUT . 😊
I’d measure the roundness of that cam just in case the heat got to it. Most likely ok but just for a piece of mind
In your experience how many times can you retorque ARP 2000 rod bolts? I did mine 3 times so far on my SBC
Happy new year
Do you think you will make sick week? Build looks like it’s coming together pretty quick.
👍Happy New Year!
New parts are always good
How did the line 2 line coating work for u
HNY dude!
Happy new year's Kyle ✨️
did you try a powerful magnet first
Having the rod honed .001 bigger dont affect the crush on the bearings??
Yes it will, some concern there as most only have about .0018" crush combined.
@ maybe the rod were on the small side of tolerence 🤷🏼♂️
Hell yeah sbk! Small block kyle!!!
The old school circe track engine builders had a means of clearancing bearings before the different bearings became available. It was a specialty reamer. I have no idea who made them. Most of these people built Offenhausers previously. That generation is gone to us anymore.
Did you oversize the big end of the rod? Or just run it on the high side of the spec? I am asking because my concern would be reducing the bearing crush itself... beautiful belt drive, though.
So belt drive is stronger than a chain or gear drive? Curious what caused the dowel pin to fail?
Not necessarily stronger than the chain or gears. But more forgiving of rapid RPM change (like the 2step or rev limiter) thats one of the reasons the cam dowel sheared. That and you’re supposed to use two dowels not one on a high RPM solid roller which i did not do.
Less rotational weight, easier on everything at high rpm.
Thanks for the info.
Will it remove chrome from aluminium?
Bad Ass! Looking forward to seeing that bish rip!
Are you taking Blueberry to Sick Week?...How soon will you have Cherry Bomb ready to drift?
Stylin’
What heads you running on that windsor Kyle? I always loved my TFS hi-ports? Wadaya think?
I seen in a previous video he has some Trick flows. The exhaust looked ported. I tried to identify them on the trick flow website, but i needed more info. Hopefully he will reply or show us.
I think Walter White used that acid….
For what? Don't recall him talking about HCl.
@ it’s American humor silly
@@ronr344
But the joke kknda fails to hit the mark as WW never ever as much as mentioned this acid.
@@AB-80X he desolved bodies in acid…..so there’s that. No need to reply, your sense of humor is lacking and that’s fine
@@ronr344
Far from it. I'm just not as simple as you.
Champ!!!
Sweet
What are you doing wearing a Noonan t-shirt on a Morris engines video??? Love watching folks work on F.O.R.D. stuff, never ending enterainment...
Why go from a strong double chain to a belt ?..... Id have gone to gear drive which i have used on my Chevy engines
The belt is about the same strength as the chain. But the real advantage this set up has is found in the “stretch” that the belt does have, the harmonics dampening affect of the belt, and it makes it extremely easy to adjust cam timing or change cams all together.
Something I don't really get, is that underlining of BILLET.
I get that some parts work very well in billet form, are pretty cool and are also expensive.
I guess my problem with it is, that it kinda comes across a bit tacky like an "American Chopper" vibe.
Maybe it's just me being weird, it was just what stuck me as I read the video title as it's not your style at all.
Otherwise cool stuff Kyle.
Background music name? Thanks
Smurfs names are Brainy smurf,hefty smurf,grumpy smurf,papa smurf,and smurfette
How do you guys not have a 2.200 rod mandrel lol
Nice pice
When I was a Kid, I had a thing for 351 Cleveland’s. I never see them in drag racing though. Were they just a POS or what’s the reason nobody runs them?
If u can't find certain Ford brackets can't ya just bust aomw out on somw them cnc machines back there I mean if u cab score the measurements of the brackets I mean u could program the cnc and make ur own I mean that would be most logical idea
So is it Blueberry or BooBerry. 🤣
@@Huntinghogs unofficially blueberry but i like the sound of booberry 😂
Does your mom know you used the phrase: "I promised you if you watched my shorts, I'd show you this thing"?
😂😂
🇦🇺🤙
KYLE IS THAT THE ROYAL WE. STILL NOT RECEIVED ENEY WAGES YET. WHAT HAPPENED TO YOUR BROTHERS BUILD
Probably shouldn't make any passes on galaxy gas even though I've suggested it multiple times :)
Kyle what happened to Kevin Smith and your moms camero.
I’m hoping it shows up at Sick Week. I’m guessing Kevin put down the camera to get shit done at his shop.
Not going to be ready for Sick Week. Goal is now Sick Summer.
I get what y’all doing with the removing the plating on hardware for welding, but think it appropriate to warn y’all that this could result in hydrogen embrittlement, that can result in popped bolt heads, etc., so, don’t do it on critical hardware for installation.
All this because of a pin :P
Kyle why don't you step up the car to ann SML