Had just purchased a used 2008 650 outlander. Got it home and started to overheat. Fan didn’t turn on. After watching video found bad relay fuse. But used info from this to determine fan and sensor good. AWESOME VIDEO THANKS 😊
@yoyoo011 your video helped me get out of the woods!!!! Thank you glad to hear that... this is why I do the self help video's It's nice to know that it really helped someone in need when they need it most...
Ok so I checked my fan and it is fine then checked if any of the wires by my ECM if any were unclicked and none of them were lose and I have a brand new ECM but I unplugged my temperature sender and it did create a code but the fan did not turn on so does that mean that I have a bad relay?
My can am renegade 800 08 won't start I was riding it slowly threw the trail then all of a sudden it stalls and the screen says low battery check ending and limp home mode This happened to me last week and I brought it to the dealer and they fixed it but it now doing it again there is no power getting to the head lights engine or anywhere except for the dash what do I do
@shanewendi Huge help. Thanks so much! Thank you I'm glad that it helped i have several self help videos an will be posting more soon check them out...
teaching lil Pea, hi and of course it did help. Thank you so much, I have a CAN-AM OUTLANDER 800, 2010 it’s was kind smooth runing until I took it to mechanic then the problems start to show off. On my way home Coming from the mechanic shop about 1.5 km the mofle or silencer or exhaust pipe was red hot the cooling fun didn’t go on and don’t know what the problem is until I saw your video and unplug the sensor under the seat right side an the fun go on almost automatically whet I start the engine.
@@alfredb8471 Sounds like your muffler is stopped up it should have a spark arrestor in the end of it pull it out an clean it it will be in the exit tip of it some are held in by screws but most have pop rivets you will need to drill out to remove it
My 2004 Outlander 330 runs for about 10-15 minutes then stalls. Once it cools down, it'll start again but quickly die after re-warming up. At no point in this does the radiator fan ever kick on. About how long after starting your Outlanders does the radiator fan kick on?
@@JonesN4life it gives me no indication that it's shutting down due to overheating but i suspect that is the reason. gonna try to bypass the switch that kicks on the radiator fan so that it comes on when i start the quad, hoping that'll give me some clues. still, seems more than just the fan should keep the quad from shutting down due to overheating.
Thanks for the video. I followed your instructions on a buddies bike and got it working and home! Time to get a relay.
your so welcome I'm happy I could help
Had just purchased a used 2008 650 outlander. Got it home and started to overheat. Fan didn’t turn on. After watching video found bad relay fuse. But used info from this to determine fan and sensor good. AWESOME VIDEO THANKS 😊
Glad I could help enjoy the new toy brother.
Quite informative my bro👍🏼💯.. Excellent understanding and explanation😁
Thank you
Thanks, Fixed mine without having to buy parts. UdaMan!!!
Happy I could help...
Nice instructional video. 👍I have an 2007 800 max xt. Hoping they are the same
They are pretty close hope it helps
thanks or the info. With your fan not coming on were you getting the engine light coming on and hi temp going across the screen?
@yoyoo011 your video helped me get out of the woods!!!!
Thank you glad to hear that... this is why I do the self help video's It's nice to know that it really helped someone in need when they need it most...
a very smart pattern i notice with bomber owners Can-am alike.
I had this issue, did all the troubleshooting scratched my head a bit. Turned out to be the stupid radiator cap.. new cap fan works perfect!
Good find glad you got it running
How is that possible?
thanks this is what our group is about helping anyone and everyone....
Awesome. Thank you for the help. You did a great job.
Hey thanks for the video! I unplugged the sending unit got the fault code no fan. So that means I need a relay ?
you can swap the relays and verify prior to buying a replacement
teaching lil Pea I swapped the relays and the fan is still not kicking on when unplugging the sending unit. Any ideas what it could be ?
Have you tested the fan if not connect 12 volts to it verify that it comes on if so it sounds like a short in the wiring clean all your grounds first
teaching lil Pea yes I tested the fan and it works. Will check all the wires. Thanks for the quick reply
Thanks for the video. I was wondering where the fan switch relay was lol.
dude i LOVE ur fourwheeler its awesome!!!!
Hey thanks for the vid. I'm currently having this issue. Just wondering the best way to check the relay? Can I switch the 2 just to check?
+Tim Braga yes you can they are the same
your video helped me get out of the woods!!!!
Ok so I checked my fan and it is fine then checked if any of the wires by my ECM if any were unclicked and none of them were lose and I have a brand new ECM but I unplugged my temperature sender and it did create a code but the fan did not turn on so does that mean that I have a bad relay?
You can swap the relay with another one in your fuse box to verify. Also you can test your fan by running 12 volts to it from the battery
Hey u have iny idea why my canam outlander has to have so much throttle to go
I have a out lander 800 xmr nd I have the same problem do I need a new fan? I checked my fuses and there good
Bună te rog spune-mi și mie care e cauza de mi se încălzește atv eul și nu ma lasă să accelerez
My can am renegade 800 08 won't start
I was riding it slowly threw the trail then all of a sudden it stalls and the screen says low battery check ending and limp home mode
This happened to me last week and I brought it to the dealer and they fixed it but it now doing it again there is no power getting to the head lights engine or anywhere except for the dash what do I do
@shanewendi Huge help. Thanks so much!
Thank you I'm glad that it helped i have several self help videos an will be posting more soon check them out...
Hi very helpful video. I’ll try what you describe
Thanks hope I could help
teaching lil Pea, hi and of course it did help. Thank you so much, I have a CAN-AM OUTLANDER 800, 2010 it’s was kind smooth runing until I took it to mechanic then the problems start to show off. On my way home Coming from the mechanic shop about 1.5 km the mofle or silencer or exhaust pipe was red hot the cooling fun didn’t go on and don’t know what the problem is until I saw your video and unplug the sensor under the seat right side an the fun go on almost automatically whet I start the engine.
teaching lil Pea continuing with my 2010 outlander it loose torque on the hi revolutions
I apréciate your good willing help with your institutional videos, and if you have any idea I leave my phone number 6673756851 with freddy thx
@@alfredb8471
Sounds like your muffler is stopped up it should have a spark arrestor in the end of it pull it out an clean it it will be in the exit tip of it some are held in by screws but most have pop rivets you will need to drill out to remove it
My 2004 Outlander 330 runs for about 10-15 minutes then stalls. Once it cools down, it'll start again but quickly die after re-warming up. At no point in this does the radiator fan ever kick on. About how long after starting your Outlanders does the radiator fan kick on?
Is it shutting down due to overheating or spark sounds like the coil is bad their around 20 bucks
@@JonesN4life it gives me no indication that it's shutting down due to overheating but i suspect that is the reason. gonna try to bypass the switch that kicks on the radiator fan so that it comes on when i start the quad, hoping that'll give me some clues. still, seems more than just the fan should keep the quad from shutting down due to overheating.
@shanewendi Huge help. Thanks so much!
glad I could help...
Huge help. Thanks so much!
glad to hear it
@deerslayer199102 dude i LOVE ur fourwheeler its awesome!!!!
Thanks I appreciate that, I feel the same way about it...
thanks i had the same problem
damn boy, you smart
+Brandon Quenneville not sure about that but I can follow a wire lol
Any one now. What's check dps on my 2012 can nam autlander 800
+Román Campos that is an issue with your power steering check and clean all of your ground wires and their posts
8 yrs later
HAHAhahahah
your welcome...
hardwire it straight from the battery to a toggle switch
Wow, awesome video. I have a 09 outlander 500, your vid worked for me. from north west ontario ..Thanks
by the way i.m not sexy96, I,m just the proud Dad...lol