I realized that I move a lot slower than any regular family sedan in stop and go traffic. Guess your body just doesn't want to beat on the clutch or the fuel economy.
Slipping the clutch at low speeds to inch up is fine imo, doesn't wear it much. I'll usually give it a tap to get up to like 3mph and then coast until I need to brake or the car in front moves up. Bonus if we're on a downward slope lol
I had just gotten it that day so I think I used the standard super view lens at 4K resolution at 60fps (their highest quality shooting option in settings). I got a creator kit which included the hat clip, which is what I used to get the POV shot.
You need a deep 14mm socket, a 3" extension and a socket handle. For the extension, grind out the ball which grips the socket -- makes it much easier to get it in and out of place. Also a 10mm to undo the coil packs. I suggest that when you put back the coil packs, you change the bolt for something with a better head on it: the stock ones are such that sockets kind of slip off them - really annoying. You also need a bendy magnet to get the socket and the plug out of the engine once you've undone it.
Super nice exhaust setup, sounds nice but not too loud
She floats!
When you are opening up the car a little (you know, giving it some hell) approx how fast are you getting up to in 2nd gear.
Unless he's changed the gears or the final drive ratio it should be the same as stock which I believe for the zenki models is ≈60mph
I realized that I move a lot slower than any regular family sedan in stop and go traffic. Guess your body just doesn't want to beat on the clutch or the fuel economy.
What?
Slipping the clutch at low speeds to inch up is fine imo, doesn't wear it much. I'll usually give it a tap to get up to like 3mph and then coast until I need to brake or the car in front moves up. Bonus if we're on a downward slope lol
siiick
Hi Joe, just out of curiosity what are your gopro settings when you record from this position?
I had just gotten it that day so I think I used the standard super view lens at 4K resolution at 60fps (their highest quality shooting option in settings). I got a creator kit which included the hat clip, which is what I used to get the POV shot.
do you know what tools to buy to do the spark plugs?? i need to do mine soon 2016 FRS
Socket, elbow extension and a lot of patience. FTSpeed has a tutorial on their page that I followed.
You need a deep 14mm socket, a 3" extension and a socket handle. For the extension, grind out the ball which grips the socket -- makes it much easier to get it in and out of place. Also a 10mm to undo the coil packs. I suggest that when you put back the coil packs, you change the bolt for something with a better head on it: the stock ones are such that sockets kind of slip off them - really annoying. You also need a bendy magnet to get the socket and the plug out of the engine once you've undone it.
What exhaust. This is the best ive heard
It’s the TRD cat back exhaust.
@@joegranitto with those 4-2-1- headers its a great sound. Nice build.
ALSO DID YOU CHECK THAT 2013 FOR THE RECALL?
I got the recall done about 5 years ago.
Don't do it
@@Carlos.RiveraDefinitely do it before adding major power, just be sure the person doing it knows what they're doing.
@@slipp3ryslop3 why risk it?
Did the kit give you the sound of turbo? Barely i can heard it
No sounds of turbo. It sounds more like a jet engine. It's much more pronounced at higher RPMs.