Now Hudsons! Oh my goodness! That will be Great. Those look really good too! When I get the layout ever started, I want a turntable and all these locomotives. They would look Great around it! Thank You for another Locomotive that would make a very impressive addition to the Royal Blues.
Just completed the 1st design for a Vintage K5 Tender Cast Metal Body a NGS Chassis in 3D Print, with cooling fan and holes for the NGS Reverse and Smoke Control and AWPU 4 wheels.
I have three folks that have agreed to buy the Royal Blue 350 Next Generation S (NGS) Kit as I have shared with you for the 2014 Royal Blue 350 Conversion and the custom Extended Tender Chassis. I will post a complete Kit parts list in a new Video this week so it is crystal clear what is includes. 1. Leon 350 Royal Blue, Post War Classic Gilbert Flyer S 2. Rodney 350 Royal Blue, Post War Classic Gilbert Flyer S 3. Tim L. PreWar O Gauge Pacific (using Vintage Trucks and 3 rail pickup) One kit each. If you want one and you are not here yet let me know I need to get a list so I order enough parts. Some are asking NGS parts but not a whole engine kit. Fine. We have the Motor Control Board for DC Motors using Flyer reverse logic F-N-R-N. Includes the Power Distribution Board and we can make them both for $40. The 4 wheel All Wheel Pick Up are also available with the wire pickup. The 6 Wheel All Wheel Pick Up is available with the Grass Eyelet wired pickup. we have two types of 6 wheel Side Frames , Hudson/Northern or Coil Spring We can provided Smoke Lids for Vintage Flyer Smoke Housings with temperature controlled Smart Smoke, It requires a Volt Regulator (Buck Board) taking DC from the PDB. As an Option we have a Chuff Sound board that we can add for additional sounds. It is triggered by a Reed Switch We also have a Fan Driven 3D Printed Smoke with adaptor to fit Standard Flyer Steam Engines. This Fan driven smoke requires a Puff Controller. This is a 3D Adaptor designed to bolt on to the top of the DC Field Housing. And uses a Special Smoke Gear fitted onto the factory Smoke Gear Boss. The Puff &N Chuff Process is controlled by a small PC Board that takes DC power off the PDB and includes two Synchronized trigger devices one for Puff Pulse and One for Digital Chuff Sounds. I can answer any questions and will entertain about any project ideas although I have a long list of projects already. A teammate Andy has helped al ot with designs but he has been busy with his work and he is NOT retired. Dan has been very helpful in the PCB assembly and he may take on more PCBs soon. I will share the 3D Print files as you can now get some of the 2014 350 parts on Thingiverse. The Rolling Road is listed on Cults. I am working on complete Bill Of Material lists so you all can order components we use and them print the parts for your own Assembly. I don't have a web site and wanted to try to find a way to use Facebook or some other tool to have a home base we can go to and work together. Take Care out there and Keep Chugging. Dennis
Coming along 2nd print due in 15 minutes had to retweak the width 2 mm. Should be a great platform for NGS to these RIB Hudson's which you can find cheap .in ruff shape. They make great NGS upgrades. Smoke Fan Driven, Digitial Sounds, DC Fields, Puff Smoke and All Wheel Pick Ups oh yeah.
Hey, loved the vibe🙌! I'm not really sure if it is the best time to ask but, I was wondering if I could help you create a better distribution by working on post-production like better storytelling through Edits, Keywords, think catchy intros and outros, or even some engaging short clips! Would love to chat if you're interested and keep creating good content:)
I appreciate your input but have to tell you, I am researching and designing trains 110% of the time. My videos are about as good as I can do and still continue the work i have to do. My vision is way out ahead of the progress I can make and I am 74 years olds. I do all this for the hobby. It is not a business. I am a great story teller and could dictate to a video or slides but I am to slow to craft it all. Tell you what I have a Powerpoint Slide concept. I could send to you to see what you can do. If you want. D
Now Hudsons! Oh my goodness! That will be Great. Those look really good too! When I get the layout ever started, I want a turntable and all these locomotives. They would look Great around it! Thank You for another Locomotive that would make a very impressive addition to the Royal Blues.
Just completed the 1st design for a Vintage K5 Tender Cast Metal Body a NGS Chassis in 3D Print, with cooling fan and holes for the NGS Reverse and Smoke Control and AWPU 4 wheels.
I have three folks that have agreed to buy the Royal Blue 350 Next Generation S (NGS) Kit as I have shared with you for the 2014 Royal Blue 350 Conversion and the custom Extended Tender Chassis. I will post a complete Kit parts list in a new Video this week so it is crystal clear what is includes.
1. Leon 350 Royal Blue, Post War Classic Gilbert Flyer S
2. Rodney 350 Royal Blue, Post War Classic Gilbert Flyer S
3. Tim L. PreWar O Gauge Pacific (using Vintage Trucks and 3 rail pickup)
One kit each. If you want one and you are not here yet let me know I need to get a list so I order enough parts.
Some are asking NGS parts but not a whole engine kit.
Fine. We have the Motor Control Board for DC Motors using Flyer reverse logic F-N-R-N. Includes the Power Distribution Board and we can make them both for $40.
The 4 wheel All Wheel Pick Up are also available with the wire pickup.
The 6 Wheel All Wheel Pick Up is available with the Grass Eyelet wired pickup. we have two types of 6 wheel Side Frames , Hudson/Northern or Coil Spring
We can provided Smoke Lids for Vintage Flyer Smoke Housings with temperature controlled Smart Smoke, It requires a Volt Regulator (Buck Board) taking DC from the PDB. As an Option we have a Chuff Sound board that we can add for additional sounds. It is triggered by a Reed Switch
We also have a Fan Driven 3D Printed Smoke with adaptor to fit Standard Flyer Steam Engines. This Fan driven smoke requires a Puff Controller. This is a 3D Adaptor designed to bolt on to the top of the DC Field Housing. And uses a Special Smoke Gear fitted onto the factory Smoke Gear Boss. The Puff &N Chuff Process is controlled by a small PC Board that takes DC power off the PDB and includes two Synchronized trigger devices one for Puff Pulse and One for Digital Chuff Sounds.
I can answer any questions and will entertain about any project ideas although I have a long list of projects already. A teammate Andy has helped al ot with designs but he has been busy with his work and he is NOT retired. Dan has been very helpful in the PCB assembly and he may take on more PCBs soon. I will share the 3D Print files as you can now get some of the 2014 350 parts on Thingiverse. The Rolling Road is listed on Cults. I am working on complete Bill Of Material lists so you all can order components we use and them print the parts for your own Assembly. I don't have a web site and wanted to try to find a way to use Facebook or some other tool to have a home base we can go to and work together. Take Care out there and Keep Chugging. Dennis
Another great idea…
Coming along 2nd print due in 15 minutes had to retweak the width 2 mm. Should be a great platform for NGS to these RIB Hudson's which you can find cheap .in ruff shape. They make great NGS upgrades. Smoke Fan Driven, Digitial Sounds, DC Fields, Puff Smoke and All Wheel Pick Ups oh yeah.
Hey, loved the vibe🙌!
I'm not really sure if it is the best time to ask but, I was wondering if I could help you create a better distribution by working on post-production like better storytelling through Edits, Keywords, think catchy intros and outros, or even some engaging short clips!
Would love to chat if you're interested and keep creating good content:)
I appreciate your input but have to tell you, I am researching and designing trains 110% of the time. My videos are about as good as I can do and still continue the work i have to do. My vision is way out ahead of the progress I can make and I am 74 years olds. I do all this for the hobby. It is not a business. I am a great story teller and could dictate to a video or slides but I am to slow to craft it all. Tell you what I have a Powerpoint Slide concept. I could send to you to see what you can do. If you want. D
@@DennisMurphey Sure I would love to have a glance.. where can I get in touch with you?