Shortening a Ford 8.8 for my LS Swapped S10 Blazer. Part 1 (Teardown) & Junkyard!
Вставка
- Опубліковано 16 вер 2024
- Starting on my Ford 8.8 !
A popular go to for strengthening your rear end assembly.
To start off this rear end came from a 1998 Ford Explorer we picked up from the junkyard a few months back. We are going to be shortening it but first we're going to have to tear this thing down, run down to the junkyard and get some parts we'll need!
How to remove C-Clip axles.
Want to help with the builds?? Follow the links below!
Become a Patreon here
www.patreon.co...
Buy merch here
deadbeatgarage...
Send Me Stuff Here
Bravus Jeffries
P.O. Box 23398
Phoenix AZ 85063
Follow me on social media
Facebook
www.facebook.c...
Instagram
www.instagram....
Built Not Bought group on Facebook (fixed the link)
/ 768216480031651
Thank you all for the love and support you have shown, it is greatly appreciated!
Check out all the links below! Help support the companies that support the channel! #dbfam
MPC Motorsport website! Full of badassery!!
www.mpcmotorsp...
MPC Motorsport on Instagram
www.instagram....
Looking for some custom fabrication!? Get ahold of Sic Industries, LLC.
Facebook
/ sic-industries-llc-529...
Email
sicindusrties@hotmail.com
Visit Finish Line Factory for all of your AN line needs!!
Finish Line Factory Website
finishlinefact...
Enter "deadbeatgarage" at checkout to receive 10% OFF!!
Finish Line on Instagram
www.instagram....
Finish Line on Facebook
/ finishlinefactory
That's exactly how I got my last dog. She was running around in the highway and almost got ran over. She was super affectionate. Just loved everyone who she came in contact with.
My sis got a kitten this way. It was hanging out in the middle of the highway. So she scooped it up, and tried to find the owner. Nobody stepped up and the cat stayed.
Dude fucking mad ass respect to you for help out the dog I have a lot and do enjoying seeing your dogs on camera but not everyone would have taken the time to do what ya did, and it sucks saying that but I’m so happy you did
One more reason I love this page , puppy's melt my heart, thank you for helping her out
Massive kudos to you and that nice lady for giving that dog a second chance. Always knew you was a good guy, this just proves that further.
God bless you for taking the German Shepherd dog to the shelter and it was perfect timing as God's way saying it's meant to be. I can't wait to see that done. 😊
Thanks for saving that dog's life!
👌🙏bro you did a great job picking up the dog man , good karma will come your way bro. not only did you rescue her you found her a for ever home and made some else happy!!I would have taken her home to be honest but I know you have a few dogs yourself. most Def good karma will pay off bravus
Man! Such a cool dude for helping that dog! Looks like it had been lost for a while. 😎🐺❤️
The fact that you stopped and got the dog to safety bro. Mad respect
Hell Yeah Brother 🇺🇸🦅
Always gotta stop for helpless animals…awesome time spent!! Definitely buying merch now!!
No posi traction…or traction/ slapper bars to kill the wheel hop yet? Or a five link bolt on kit w/QA1 shocks…squat and GONE. Thanks for the awesome content…kills the corporate monotony everytime!!👍
Kudos to you for still getting to the junkyard after the dog situation
So much respect for you right now thank God we still got good people that will take a few minutes to help a dog who needs help this is DBFAM at its finest. Keep up the hard work ur killin it....
Thanks for saving the dog man
if you grind the weld on the axel tube at the center section you can spin the tube right out then put the short one in
Definitely should have taken your 8.8 back to the junkyard to see if you could trade + cash for the 8.8 that had the factory LSD, 373 gear and disc brakes. That would save you a bunch of money, labor and headache later on. Basically all you need with that other rear end in the yard besides shortening the tube is a set of Caltracs, shocks and leaf springs. Project S10 went that route and his shit works great. He just shortened his axel tube a couple months back too to get ready for race season.
Mine is a 373 as well.. mini spool, c-clip eliminators, traction bar and I'll be fine. Calvert Racing doesn't make the traction bar for the blazer unfortunately. The bracket for the leaf spring is different from the truck.
@@deadbeatgarageaaah gotcha. What about adding some weight behind the rear end to help keep the tires planted. Can use lead bars or if you wanna get crazy fill the tailgate with concrete lol
Many syclones and typhoons have cal traks so arent you mistaken?@@deadbeatgarage
You should upgrade to c Clip eliminators as well if you brake that axle doing a burnout or something the whole rotor and axle and wheel will come out and roll past you.. and we know you love doing burnouts
Caliper brackets for disc brakes are the poor mans c clip eliminator. The bracket will hold the rotor in and not let the axle out Lol. Drum brakes will let the whole shebang float passed you.
That was a good thing ya did for that puppy dog. Need to get me an 8.8 for my mustang. Plenty of explorers around but no v8 mustangs n the junkyard around here n don't Wana have to do alot of mods just to make it work. But glad to see your actually gonna get the axle and not do like iv seen a few ppl do n cut n reweld the axle.
Good man.. I to will always stop for a dog
Dude your junk yard is expensive. I got a 8.8 3.73 LSD rear for my S10 for 150 and they pulled it. Got the short side axle for 40. Definitely a good upgrade for your blazer. And props to you for saving that dog. Love your channel bro.💯👍
❤god bless u for helping the doggie i would've done the same can't wait for the next video about ghe diff.
That’s good of you doing that with the dog bro. Hell yeah db fam is dope
There is a brake line adapter fitting it is 3/16, 24 by 3/8 x 24 that will connect your factory brake line to the Ford Explorer line going to your brakes. Just thought I’d pass that on.
Big thumbs up for help saving that dogs life been watching u guys for a long time love the burns outs
You should grab the proportioning valve off the explorer as well for the brakes your brakes will forever b squishy if you don't when you convert to the drums.. and maybe the master I'm not sure it's been a while sense I've done this
My sincerest apologies for anything I have ever said bad about you. You know from my history how much I love dogs. Today Mr. Bravus you became my hero for helping that desperate soul. The dog you saved. God bless you and God love you. You truly are a beautiful man. Thank you Bravus....Thank you❤❤❤❤❤
You always buy two hole rear-ends. Then sell Beverly (mope head) the other one
Let go for the win
With those years truck for the suburban the gauges drain the battery most common thing I had the same problem after two days it was always dead you can test it by using a volt meter to the fuse box in side the truck there is UA-cam videos about it
You guys have the best yard videos lol
I've always been into the small block Chevy (Vortec / LS) stuff, so it's been really fun seeing you start to explore outside of your Honda roots!
Also, you did a really good job filming the diff tear down. It's something I've played with and seen a ton of times before, but I don't ever recall seeing such a well documented disassembly
Very enjoyable to watch - thanks for the great video!
most of the 8.8 explorer rears are 31spline
Major props to you for taking care of the dog. Good karma coming your way
Great video bro
That was a nice thing you did with the dog bro…..
great things happen when you do something good remember that...
I woulda grabbed that trac lock carrier. Will drop right into yours. Great upgrade.
Karma points +1
Please remember to get the proper brake proportioning valve then
He'll yeah bro and I plan on put a 8.8 irs in my toy so I can actually rip it as I have never launched it or done a burnout at my power level as I'm over the rated power for trams and diff atm lmfao 😅 .. but he'll yeah bro look forword to seeing the blaze getting beefier and maybe at some point forced induction 😮😅.. peace and love bro keep it rad stay safe and build on l8z
Props to you bro. Not many people take time out of there day to make a difference. #DBFAM
I’m building a 88 right now and have this same set up
Yes you did the right thing that was awesome just like you are hell yeah 👍
I have had the axle brake in a jeep with a c clips on the back and I seen my wheel coming past me
God bless you great karma coming 🙏
Good job bro 👍🏽
Yo bro you need to invest in a wagon to drag around the junk yard
15:55 keep her
Try doing the ebrake shoes on that bad boy with out removing the axles. 😂🤣
Let's go DB FAM 💪💪💪 late to the party
Good job bravus. ✌🏻🇳🇱
Hell yeah bravis good job rescue that dog.
Use axle ends
I’m new subscriber in SLC I noticed you don’t have posi in your rearend and I’m curious why you didn’t take it from the junk yard rear end?
Thank you for the videos!!
🐾
I have a spot for 56.00 you get any rear end.
I wonder how many short axle failures there are since reversing the twist on a used axle isnt a good thing
“i don’t think it speaks english” 😂
Explorers are 31 splines and Mustangs are 28 splines.
Yo DB, you should’ve got one they had an LSD in it😳😬😱🤦🏽♂️😊👍🏼🤙🏽
bruh definitely get the 8.8 sport rear end lsd hahaha.. if i was building a drift car.. that's a fawkin deal vs buying a Civic B or K series LSD alone for $700-1k
8.8 from Exploders with disc brakes like this one are 31 spline, I think.
edit: The 8.8 in your garage isn't a Trac-Lok! Wait, what!!
This kind of defeats the whole purpose of changing out the rear end.
There is a way around this, if you pick and pull your way through the riddle/mystery/conundrum/problem. But don't film it.
Man just get you a Gbody rear end a d just change the gears. Done.
Spend the money and get ford 9" ends for your 8.8
Fk yea my g!! you did the right thing most woulda just left her on the freeway.. sht sucks cus I love dogs and I can’t stress enough IF YOU CANT TAKE CARE OF THEM GIVE THEM TOSOMEONE THAT WILL.. & lock yo damn gates dogs are smart they will get out
Ford has always made a better rear end...all the Nascar race cars had a Ford rear end...
Is the LSD better than just welding the diff?
100% better
U have a wolf 😂buds keep the pups damm😢
its not a posi one wheel peal posi will have a s shaped spring in it
Bro you know you can just swap it right on without cutting or welding
🤙🏾🤙🏾💙
ADOPT THE DOG!!!!!!!
Another $300 you could have had the better set up.
That's awesome u took dog shows how fake ppl are at same time.
❤❤❤❤❤❤❤❤
What is the blazers vibration coming from bro ?