Honda Helix CN250 J 1988 - OIL CHANGE - The BEST SCOOTER Ever Made

Поділитися
Вставка
  • Опубліковано 18 лис 2024

КОМЕНТАРІ • 23

  • @Heritage105th
    @Heritage105th 3 роки тому +9

    You’re killing me with that starting technique!

    • @BoziMedia
      @BoziMedia  3 роки тому +4

      It's not a technique, it's pure ignorance! Leave a Thumbs up and subscribe if you haven't already !!!

  • @DrKelseyGraham
    @DrKelseyGraham Рік тому +2

    I have 2 helixes and 2 goldwings. I start them every other day regardless of weather.....

  • @W.451
    @W.451 3 роки тому +6

    There is no accelerator pump on the carb so twisting the throttle does nothing. Put on hose on the carb fuel inlet to dribble some gas into the bowl first.

    • @BoziMedia
      @BoziMedia  3 роки тому +1

      GREAT INPUT, Thanks! Leave a Thumbs up and subscribe if you haven't already !!!

    • @W.451
      @W.451 2 роки тому

      @@BoziMedia That steady cam Helix video is the best Helix porn I've ever seen.

  • @newenglandpats59
    @newenglandpats59 3 роки тому +3

    When I start mine in Spring, I pull the vacuum hose that is on the carburetor and use the stem that comes with an aerosol can of starting fluid. I blow about three seconds worth directly into the throat. It starts instantly and run just long enough to pump gas from the tank to sustain life. The Helix has absolutely no redundant starting method. Therefore I go easy on the starter. The engine must be dismounted to change the starter. And OEM starters are not cheap. In 1996 it cost $280.00 and had to be shipped from Japan. It was defective and covered under warranty.

    • @BoziMedia
      @BoziMedia  3 роки тому +1

      GREAT INPUT!

    • @newenglandpats59
      @newenglandpats59 3 роки тому

      @@BoziMedia
      Thanks!

    • @minhtrietle
      @minhtrietle 2 роки тому

      Thanks for this info! The starter on my Helix tends to get stuck sometimes. You mentioned that the engine has to be dismounted to replace the starter. Did you do this yourself in the past and how difficult was it?

    • @kevinspahr6632
      @kevinspahr6632 2 роки тому

      Can you show me exactly where this vacuum hose is that you speak of?

    • @W.451
      @W.451 2 роки тому

      Ether is very dangerous in that it can bust a piston. Just prime the float bowl with Gas first through a carb vent.

  • @marcgervais3737
    @marcgervais3737 3 роки тому +1

    la pation du spazio c est toujours drole de voire du taf sur mon fidelel compagnon ! amigo

    • @BoziMedia
      @BoziMedia  3 роки тому

      Subscribe if you haven't already.

  • @bobhorbart2972
    @bobhorbart2972 3 роки тому +1

    Can someone tell me how to check the fuel pump ?

    • @BoziMedia
      @BoziMedia  2 роки тому

      Thanks for your comment. Subscribe if you haven't already.

    • @NEROAviation
      @NEROAviation 2 роки тому

      Take off the hose to the carb and turn it on it will spray gas out if its working. Or just get an inline clear fuel filter and watch it fill up.

  • @bigwu100
    @bigwu100 4 роки тому +4

    That's ok starters are cheap.damn

  • @eframz8054
    @eframz8054 4 роки тому +2

    Amigo no sabes prenderla nunca se deja la marcha mas de 3 segundos y al peesionar el boton start debes acelarat

    • @BoziMedia
      @BoziMedia  3 роки тому +1

      Discúlpame, por favor. Subscribe if you haven't already.

  • @natm3145
    @natm3145 Рік тому

    Carb cleaner pssst pssssssst

  • @ioannisvazos5258
    @ioannisvazos5258 Рік тому

    you came with the car wear theese sily sleepers and after you riding the scooter wear sorts sleepers and gloves. Come on man