Run down of the Polarstar Jack FCU
Вставка
- Опубліковано 2 жов 2024
- I have had a few requests for this video, so I did some research and whipped this together. Enjoy!
If you are interested in joining my team, email me at reapersspeedsoft@gmail.com
Link to my discord: / discord
Follow our Instagram: @reapers_speedsoft
Please like and subscribe!!
This is best video for a few reasons, hes really helps, makes it simple, and his voice isnt like an 8yo that makes want to off myself 😂
thank you sm man! I truly appreciate it!
Honestly I was intrested in getting one so if I were to ever get it I would come to this video, thanks for your help
Glad I could help!
i fucking love you dude. every other video is from 5+ years ago
Thank you! I really appreciate it. I try to get good videos out to the ppl who need them!
Omg Thank you so much I just got my first polastar and I started messing around with it I didn’t know what I was doing and I found your video and I explained what everything means. thank you very much this video was really helpful.
You are so welcome! I’m glad I could help!
the f2?
config
Its the settings for an f2 polar star. What this gives you is more things to change on the fcu than the jack settings
what battery do i need to use for the fcu... ive been looking into hpa and have had a hard time finding info about powering the fcu :)
I’m new to hpa I plugged my line in and put battery into fcu is that all I have to do cause it won’t shoot
That is everything you need to do, make sure the fcu says “shoot” too. If it says anything else you’re in programming mode and it won’t shoot
Yeah I found out I installed my maxx trigger wrong gonna fix it tomorrow
@@its1153 oh dang lol, thank god I watched like 6 install videos before I put mine in
Kinda dumb to set your SINGLE solenoid system on a DUAL solenoid program, closed bot won't matter same with all other settings other then dp.....
I mean it works, haven’t failed me in over 1.5 years now
I’m getting my Jack tomorrow I’m excited( I got it I fkn love it)
Hey thanks for the info also I just got a custom arp9 build with an f2 and I’ve played with settings for hours now and I can’t get above 240fps on 110psi any help would be greatly appreciated!!!
interesting, I would mess around with your dp, set it around 50 or 60 and see if that does anything
@Harry Wang ya I lol, the barrel is so short. I have a 6.01 tight bore in there now
@Harry Wang I agree, my fps only jumped up 15ish with the new barrel
Also, you can put it on FE settings, on the last selection just move your joystick up
I have and it shoots fine
I have the 3.0 software but dont have any of those options, very confused and need help lol
Nvm I just dont have the closed/open bolt setting
@@gabedezutti8712 lol, you have to switch it off the jack settings to the FE settings
@@ReapersSpeedsoft Wow I’m an idiot 😂 Thank you
@@gabedezutti8712 it’s all good dude, I accidentally found out about the “secret settings”
@@ReapersSpeedsoft It be like that sometimes
Glooks for the super cool info #clash on
Nice vid but the close bolt option dosent work with the jack since it is an open bolt system. It only works for the f2 and fusion engine. If you have the fcu on the f1/jack mode it’s not even an option to choose. The reason you were able to turn it on is cause you have it on the fusion engine settings but it’s basically useless for the jack.
Ya, I found that out and it made me sad😭
Thanks a lot, I was trying to figure out a way to have a 2 round burst on semi without needing to get rid of my full auto setting. This video helped with that, Great video thanks 😃😃
Glad I could help!
great review mate, what PSI are you using and what fps you get? keep it up :D
Thank you! I usually get 320fps with 80psi
Maybe change the title…
Rundown of the f2 fcu?
Technically that is what this is, but it’s programed to work with a jack
Ok I see now! I was wondering how change full auto to semi lock' lol also for the jack I set it to f1 or fe?
It took me quite some time to figure out lol
@@ReapersSpeedsoft after messing around with it more I basically figured it out now seemed way more complicated when my friend explained it to me at the feild lol
this is the best explanation video. thank you. everyone else made no sense.
Thanks man! I really appreciate it
your a god thx made my gun 1000% better
You’re welcome man! Glad to help
dude imma be honest that was probably the best vide on that fcu. better then amped’s pleb to pro imo thank you so much for the help on my first p*
Thank you sm man! I really appreciate that!
@@ReapersSpeedsoft no problem tuned it perfect 🤩
@@greasygaming4052 glad to hear it!
Can u link your settings?
I don’t think so?
Yo so I’m running 27 dp at 90 psi but If I go any lower it doesn’t fire any suggestions?
Try turning up any of the other nozzle settings and then that should be able to turn that one down on the bit more
@@ReapersSpeedsoft and also do you know of any good hopup bucking’s I have a prometheus inner barrel but the hopup bucking I got is trash
@@Riley-hartman I would get a maxx
@@Riley-hartman i use madbull 6.01 with mapleleaf macaron 60, maxx model hop up. No problems with
Does using the fusion engine settings in the fcu damage the jack in anyway
I’m not entirely sure, but I’ve had mine for over a year without any issues using these settings
@@ReapersSpeedsoft interesting thanks for the advice
@@coolrat204 np my man
I needed this big time bro 😂
Hahaha your welcome my man! So glad I could help out!
pretty sure rf is the lower you pt the higher rps
I dont think those are settings lol, but dp controls the speed and air constantly so it affects the RPS drastically. If your dp is at 60 and your RPS is at 40, you will most likely not get 40 RPS out of your gun
What battery did you use?
im not sure, my field solds it to me
Sweat!
thank you!
Thank You so much I just got my fusion engine today and all the videos I watched didn't help but yours is the only one that did so thank u so much
Np man, glad I can help!
Can u do run down on the f1 settings? Doesn’t really help because your on fusion engine settings
Sorry man, most of the items are the same but this one has some extras, you should be able to use this video to help with the f1
Thanks for the tips man. One question, is there a setting on this that determines how much trigger pull is needed to fire? If so which one? My trigger needs a decent amount of pull to shoot and I wanna be able to spam the semi fire faster
Sadly there is not a setting for this. Your best bet is to buy a speed trigger
Thanks!! Very helpful
Np fam
Good tutorial!
Thank u!
Hey man, I was playing around with my settings. My semi is locked to full auto now, I have no clue how to bring it back I have all the settings you have. Is there a way to reset the fcu?
To do a factory reset, you need to hold down the joystick and then unplug the battery.
@@ReapersSpeedsoft thanks a bunch man
@@BadgerZomB np man!
Nice video! I just ordered a Jack from amped and I was wondering how the air efficiency is. People say it’s pretty good but what’s your opinion on it?
The air efficiency is pretty good in my opinion, but it really all depends on your settings. It’s the best buy I’ve done so far
@@ReapersSpeedsoft cool, thanks man!
@@airsofttyler255 np
Thanks 4 the video!!
Np man!
is that a 3d printed upper?
yessir! printed by my friend
@@ReapersSpeedsoft damnn
@@Fizzzgoat thanks loo
good vid bro
Thanks man!
whats dn?????? 1:09
Um I’m not entirely sure. It’s something I don’t really mess with tbh
Don’t take my word for it but I think it’s how quick it chambers a round
@@benrotolo2633 thsts pretty much it.
I can check mine if u want it cuz mines at a good setting I think
@@benrotolo2633 mine shoots great, but u can throw it in a comment for others!
Dn 10 is the min for red nozzle and mags pts
Bro you are literally goated for making this video