its a street queen. its 2wd. Its a pretty truck tho. wink wink. For real tho, I've been off roading in 2wd too on 35s and had no problem so far this year
@@Biden_for_prison prerunners, trophy trucks and the like are all 2wd. 4WD is too heavy for a race application for surfaces that are hard to get stuck in.
2 suggestions. Get some junkyard rear fenders and cut them down so they match the front height. Also make sure you paint over where ever you cut because it will rust.
Truck looks way better Now than it did the day you got it..but i was thinking maybe some Magna flow mufflers to the exhaust will give it an even more deep rumble when idling
Personally think you should've painted the inside of the rear fenders at least black to cover the surface rust. Either way the truck is looking bad ass. Love the C10
Defiently wishing my j10 was in this state rn. Got the new engine fired up, runs pretty well, having some problems with my ignition system so I'm gonna swap to a HEI system. Oh and i drove it for the first time in about 7iah months. I think the turbo 400 is fucked tho, can't wait to replace the Dana20 t-case and slap my t18 4 speed back in
Dont know if youve fixed the fenders yet or not but you could sand the lips down an do a 2 tone on it, an just paint the lips black. Be easier an cheaper than having it repainted.
Yikes! Oops! Been there done that. 72 GMC Family truck too. Stuff happens. When it happens it happens. I know that you'll fix it. Just happens unfortunately. Beautiful Chevy 4x4! BTW to me it's the little things that also matter. I have a 79 F100 "Stepside" Flarside with a Straight 6 and wood panel bed. For me it's not a quick fix because it was used as a dump for 8 years. Lots of mice and rats. Lots of rot. Lots of rot.
Ya gotta put some square back in the front end.A Square tube grill would look badass. But that's just me. The fenders look really good tho. could have been wayy worse. Super clean truck.
What a funny joke... A project vehicle finished lol! I'm just pulling your leg. Whenever I say I'm done with a project, it's never really done. Haha. Love the build!
I wonder if in 50 years youtube will still be around and we can show our grandkids and kids "daddys first truck" or when you say i used to have a c10 prerunner you can just show them.
Man I wish my dad was as supportive with cars he’s always giving me shit for spending all my money of truck parts but I always tell him at least I’m not spending my money on drugs and he stays quite 😂
Put the fenders under the truck to guard from the rain..... in a garage that’s guarded from the rain. Yep. Makes since.
Green Rving *sents
Green Rving he most likely did it because another car parked next to him
*sence
Cents
You need to turn the tires around so the white letters are on the out side
The new grill conversion looks badass son that especially with the bull bar
Next project should be putting the 5spd in the F100!
You have a kickass dad! When you have kids you will get it that much more! Way to go dad, cheers to you!
This was one of my favorite videos. I love how the trucked turned out. Honestly I wanna see your f100 painted.
Please take the obs front end off
dillon Brist honestly ruins the whole truck
Not your truck.
his truck, his choice, he can put on a charger front end if he feels like it
Use bug cleaner to clean up the bottom lights on the grille that fogged up. Big cleaner works and makes all foggy lights clearer than b4.
Seriously worried about some scratches on a "prerunner" c'mon man, please don't make it another street queen..
its a street queen. its 2wd. Its a pretty truck tho. wink wink. For real tho, I've been off roading in 2wd too on 35s and had no problem so far this year
@@Biden_for_prison prerunners, trophy trucks and the like are all 2wd. 4WD is too heavy for a race application for surfaces that are hard to get stuck in.
I've enjoyed the process. Thanks for taking us on the journey. Truck looks great!
U did cringe harder than me cuz I didn't cringe I just laughed
I think the newer grill looks awesome! Makes it look angry!
spray paint the cab floor board and put caps where you cut the horns off.
Sweet truck. You should put a big light bar on top and on the front bumper.
Old school. Beautiful!!
I like this a lot, it's nice to see someone fixing up old vehicles on their own.
Looking sweet man, well done!
Great job... this is what young people should be doing while growing up .
Father and son moments I liked that alot
Deffinetly, you gotta enjoy the small moments while they last
True to that I do with my dad all the time we restored my 68 gmc pickup together
1 man shop that's awesome man
Thanks man I really appreciate it and if you want come subscribe to me if u want
1 man shop alright I just did
That truck looks great man I restored a 82 k10 loved the truck so much now I'm working on a 75 f250 ranger
You should keep the prerunner !
New text layer 😎
WOW! Looks like a totally different truck. Very nice!
Change the front bottom lights with led lightbars so much cleaner
You should spray black beadliner under those side steps to keep from rusting anymore and it would look good offsetting from the white!!!
I'm a Ford supremacist and dam I gotta admit that's amazing from what it looked like
Mr Slick Check out my 6.0 build!
Hey thecraig909 you have inspired me to go deeper into building my 1984 s15 thanks man
2 suggestions. Get some junkyard rear fenders and cut them down so they match the front height. Also make sure you paint over where ever you cut because it will rust.
Looks great!
Nice truck man. Can't wait to see your f100 worked on!!! Awesome video!!!
Its Great! Now the fenders have custom "Patina"
Truck looks way better Now than it did the day you got it..but i was thinking maybe some Magna flow mufflers to the exhaust will give it an even more deep rumble when idling
You should fab up some tubular traction bars to bolt up to the bottom of the rear leaf springs.
Just hand sand the scrape down so that its smooth to the touch with 320 sand paper or 600 sand paper then prime and paint.
Personally think you should've painted the inside of the rear fenders at least black to cover the surface rust. Either way the truck is looking bad ass. Love the C10
There's only one solution... Flat blaaaack. All of it.
That is sick build. And did it turn out so sick. You need to rip it on the street. Sounds so good. Very nice
I wish you would keep the c10
Looks great! I do miss the old grille Guard setup but she looks mean! Great job man.
What front suspension components were used on this? Home built? Bought off line? Sweet truck!
THAT'S SICK!
Home depo in bakersfeild still carrys it 6.99 a can. Nice truck i have a 71 c10 i did a 350 crate engine next is a lift kit
Beautiful! Love your vids man, especially anything to do with the f100
Defiently wishing my j10 was in this state rn. Got the new engine fired up, runs pretty well, having some problems with my ignition system so I'm gonna swap to a HEI system. Oh and i drove it for the first time in about 7iah months. I think the turbo 400 is fucked tho, can't wait to replace the Dana20 t-case and slap my t18 4 speed back in
Truck looks great
Chris fix has a video on how to fix rust but in that video there's a part on how to paint it and have it matching
Dont know if youve fixed the fenders yet or not but you could sand the lips down an do a 2 tone on it, an just paint the lips black. Be easier an cheaper than having it repainted.
Yikes! Oops! Been there done that. 72 GMC Family truck too. Stuff happens. When it happens it happens. I know that you'll fix it. Just happens unfortunately. Beautiful Chevy 4x4! BTW to me it's the little things that also matter. I have a 79 F100 "Stepside" Flarside with a Straight 6 and wood panel bed. For me it's not a quick fix because it was used as a dump for 8 years. Lots of mice and rats. Lots of rot. Lots of rot.
Ya gotta put some square back in the front end.A Square tube grill would look badass. But that's just me. The fenders look really good tho. could have been wayy worse. Super clean truck.
Me and my dad would love to do that project.
That things looks sick. Good Work
Any chance you can get some better shots of the dash? Kinda curious how it is held in/what they did.
The c10 look awesome
Your worried about scratches & cosmetics on a prerunner... lol
Wow what a transformation
You been grinding on that thing it came out hella good man
She came out so nice great job man
How did you get the long travel done? Did you buy the parts premade or was most of it fab work?
Put led light pods in the holes in the hood as turn signals
sick truck!
Man don't worry with the fenders, I know it's aggravating but come on the truck looks awesome.
looks great dude
NICE RIDE
I hope you plan on connecting the cage to the bed cage
What a funny joke... A project vehicle finished lol! I'm just pulling your leg. Whenever I say I'm done with a project, it's never really done. Haha. Love the build!
This thing looks sick. For sure subscribed.
I love this truck man makes me want one
Nice clean fun desert truck from a guy in Glamis land.
It looks great man like the videos
rear "fenders" are quarter panels. nice build!
That's a sweet rig bro
I know that feeling... I never put stuff under my car anymore, once backed over my surfboard -_-
Hell yea truck looks amazing
trust me man people are ok with longer videos. get that ad revenue when you can lol
Nice 👍🤓 I also hated those tubes
Ya truck turned out great, the mid 70s c10 is my favorite body style! Now which is faster, the c10 or your f100? I’m a Chevy guy so I liked It!
Nice job man, I hope you made a profit for all your hard work
Looks great, so much better without the horns lol
Should've left the Zeus tabs on front fenders unpainted. Truck looks good though dude! Congrats
Cool build
Very nice craig
a nice sound dampener behind the door cards will go a long way in a truck like this.
It needs character. Show us what that truck can do broskie!!!
its not going in the dirt?
Nice truck...
Hahahahahahaha I was like nooooo WTF the fenders!!!
Gonna replace the 90s front end?
Dont use a brush
I have both those year trucks cool to see them put together looks so sweat like that😮😮😮😮😮
Hey the red and white work truck is the next project LS swap the thing 6.0!😎
bro you are almost to 20k!!!!!!!!!!!!!
Pretty badass
I got a k10 stepside I love it yours is really nice
I wonder if in 50 years youtube will still be around and we can show our grandkids and kids "daddys first truck" or when you say i used to have a c10 prerunner you can just show them.
Brother Blacksmith well if not the video files will always be on the internet. It's just a matter of keeping them in a place where you can find them
Yur kill me by using a wrong grill
Awesome
At least it's a truck. Damage is to be expected
Man I wish my dad was as supportive with cars he’s always giving me shit for spending all my money of truck parts but I always tell him at least I’m not spending my money on drugs and he stays quite 😂
how much money have you invested so far on the truck?
that jacket looks comfy af. where can i find it? thanks