TRX250R Rebuild
Вставка
- Опубліковано 2 жов 2024
- Got this 250R in boxes, rebuilt the the entire motor, bottom end, top end, made a custom spacer plate, New clutch, found all the misc. missing parts and order them, rebuilt shocks. Have another 250R project I pick up at the end of the video.
#honda #atv #ridered
Shop: www.timemachin...
Insta: @timemachinesatvs
FB Group: / 253442778458579
Send us your videos and non weird sh*t: timemachinesatvs@outlook.com
Send us your love letters to:
TimeMachines
P.O.Box 210
Rhome, TX. 76078
Use kerosene instead of gas kerosene and some brushes I've helped my dad do a lot of old school engine rebuilds and that was always the cleaning method and it works good take your parts emerging kerosene overnight go out brush the s*** off of them the next morning and it also works as a lubricant better than gasoline for sure gas will work to get it clean kerosene will work a little bit better and a whole lot less likely to spontaneously catch on fire
I appreciate the tip james. Will give it a shot. And def like that its less flammable
@@TimeMachinesATVs and also helps with first startup the oil likes to soak into the metal just a little bit
Diesel fuel work's well too!
@@lucascady4992 I could be wrong but I'm pretty sure diesel has a worse effect on your skin when we would use kerosene I would do a bare handed even though that's probably not the best thing but never had it affect my skin
@@TimeMachinesATVs less flammable but always more expensive. I’d say diesel if it wasn’t so dam high
Best rebuild channel by far. I had no knowledge of rebuilding an engine and spent 2 weeks watching your videos. Rebuilt a 400ex and a 250x with only what I learned from your videos. Laying the parts out how u do left to right helped tremendously also
The spacer you told me about LOL That's bad ass ! From a box of mostly nothing you turned out a bitchin FourTrax I dig it !
New sub....love your vids! Gives me a lot of confidence in restoring my dirt cheap LT-Z250. Now I just need the piles of cash...... Thanks for the content! Especially enjoyed YOUR LT-Z250 vids, and that sweet sweet 300EX :D
The way you have the plastic on the red 250R looks like my 300ex
Great vids I’m a 250R guy I enjoy it🤙🏻 that 88 in there is 🔥
thats a 86 bud and you a 250r guy :))))))))))) not
Gas fumes seemed to be doing there job. Lol.
man that 88 tho. thats my next buy
I use same gas tub trick but I use a paint brush to get up in there, saves time also!!! Banshee bw vid!! Lol
Wouldnt hurt to soak that gasket material n gas to c if it breaks down. Heat too..
Great idea!
Kerosene is the best parts cleaner I have found. Beats diesel and gas.
Orion isn’t no Blake. Lol he would get up in there lol 😂 Jk
Orion is here to help fix shit and make it better. Not break it.
Mf ripper🤙and when are you gonna do an update on the typhoon 125 quad tryna get some idea's from mine in the middle of making it a three wheeler
Coming soon!
Bring Blake on.
Miss that old school content
Love the videos dude keep them coming.always entertaining
Stay at it .. 💪🏽 my man !! Great video
Another great video.. 👊🏻
Can we see a trx450r vs trx250r drag when you are done?
28:45 with it stripped down to the frame it looks like my 2000 Polaris Trail Boss 325 frame my Polaris has a 570 twin snowmobile engine
Get up in there elbow deep
Just came across the chanell already lovin it!!!
Appreciate ya lots to see and more to come
I cut alot of gaskets to
Good job
Tec tip every time you pull a stator off a motor You should always gap the trigger/points at .018
Keep the video coming
Get up in there boys!!
first get up in there
Did you check the squish band after adding the cylinder spacer plate and how much is the piston out of the bore? What head gasket are you using?
Dont recall measurement but was if anything more clearance than necessary costing me a lil compression
@@TimeMachinesATVs I just rebuilt my R engine and used the “thin” head gasket and checked all those measurements for piece of mind and to know what octane fuel is required. Looks like you’re using race fuel like I am. Pump gas is a gamble in 2 strokes. Cool vid!
Looks better than factory right there now
I use diesel fuel for cleaning parts as opposed to Gasoline because i'm always making sparks and Diesel has a low flash point and fewer fumes.. but its gets the job done
Do you sell the quads and if so where do I see them?
I have a shit ton of parts for a 250r quad axle bumpers brakes disc all sorts of stuff nerf bars axles a arms too much too type
What happened to the ultra sonic cleaner. Did it crap out on ya??
How long do you leave the case on the hot plate for ? What temperature does it have to read at ?
Do another race 250 r vs 450r. 🤔
Not even close 450 wins easily.
💯👍 nice build guys
Appreciate it yanni!
What was the squish on that piston to head? 😂 dig the video man
Thank you again for good entertaining content
Appreciate you too el groucho.
I love my Chiltons 250r manual. best thing ever. Man when I saw that kick back I had flashbacks of getting wacked a many time...the vortex cdi seems to have gotten rid of the kick back.
Time machines custom gaskets inc lol!! Good content guys keep ‘em coming
Lol orion has him some badass jigsaw skills !
Wish you were my neighbor lol
Yeah buddy 👍
Why was the test gas blue?
Some 2 stroke oils turn it blue.
@@TimeMachinesATVs oh i thought that was a 4.ty
@@TimeMachinesATVs ah forgot it was the R. ty
Great quick build on a basket case dude! Nice job.
Piecing these things together is what gave them a bad name... I'm not impressed?! 🤷 🖕
Love the vid, u definitely know your stuff when it comes to rebuilding motors