About to be doing this swap iin a couple weeks. waiting on getting my head back from the machine shop.. what did you end up doing for the side piece for the coolant? just want to make sure I have everything for drop in day
@@franksgaragehonda I will be using the Stock TSX Manifold- EP3 Throttlebody. Would you recommend this for that setup? or can I use the stock TSX Water passage outlet? and do you have a part number as I see two on Ktuned's website
Nice to see ep3 content. Type S oil pump make vibrate more with out balance shafts
Thanks. Just my daily beater
Not the mounts. No more balance shafts in the motor since you have type s pump
What sensors did you have to use from the A3? Did you recalibrate the TPS on Kpro? Thanks for the EP3 content. Not enough of it stateside.
I reused everything. Yes kpro
Peep the hammer on hip 🔥
Have to protect the Hondas
Never know when the vtach hatters be hating
Im having issues using the rbb manifold on my k24a from honda odyssey with 03-05 accord throttle body . Throttle cable isnt lining up
In a ep3? I used stock ep3 throttle body because I wanted cruise control. I had to use an adaptor.
@@franksgaragehonda what adapter are you using and is it the ep3 manifold or k24 manifold?
Nice job🔥
Will k20a3 manifold bolt up to k24a1 ??
Would a k24a1 with k20z1 head make a difference from a k24a2 with k20z1 head ?
hey i just want to ask if a k24a1 fits to a civic si ep3 5-speeds transmission?
Yes.
About to be doing this swap iin a couple weeks. waiting on getting my head back from the machine shop.. what did you end up doing for the side piece for the coolant? just want to make sure I have everything for drop in day
@@cliffh6112 I did the K tuned side piece with the filler neck with the angled output. It just depends on what intake manifold do you use
@@franksgaragehonda I will be using the Stock TSX Manifold- EP3 Throttlebody. Would you recommend this for that setup? or can I use the stock TSX Water passage outlet? and do you have a part number as I see two on Ktuned's website
@@franksgaragehonda ty for responding so quickly btw
@@cliffh6112 message me on IG if you have any questions. @franksgarageyoutube
What motor mount did you use i got Billet mount is not fit
On the head side? I’d using a k24 you need a 2003 Crv mount
What exhaust manifold are you using?!!
@@juanacevedo6250 stock ep3
@@franksgaragehonda cool so i can used the stock catalyst converter too?
@@juanacevedo6250 yes everything should bolt right up
@@franksgaragehonda awesome! Thank you sir!
What throttle body did you use
Ep3 with adaptor because I wanted cruise control
130hp i thought they had 160hp
😂😂😂😂. Junk it. Easy solution
Just started driving her again for winter. Such a beater.
🙄 Promo*SM