I love my new exhaust. yobbo gets a miltek
Вставка
- Опубліковано 14 жов 2024
- Today we fit and sound test a miltek non res on my fiesta st project car. i think it sounds epic.
Support my channel here paypal.me/pool...
Business contact sparkplugsteve@hotmail.com
Thanks to pumaspeed for continued support
www.pumaspeed.c...
Thanks to motura for your support
www.motura.co.uk/
mods so far
scorpion sport cat
R sport stage 3 intercooler
itg air filter
R sport crossover
R sport hot side pipe kit.
pumaspeed short shifter
Rsport baffle sump kit
Maxd out stage 2r cat safe crackle map
miltek non res exhaust
Miltek are spot on exhausts on any car 👍🏻 i would use power flex or similar rubbers though
sounds sweet, just enough crackle and burble. I know exactly what you mean about keeping Facebook personal. Keep on with the good content mate.
thank you
Best sounding exhaust for an st
Yes I’m so glad you went with this exhaust it’s the best sound for this car
Cool video as always mate , I noticed the frozen stuff in the background brought back memories of falling asleep when the film came out in the cinema lol caused no end of bother with my now grown up daughter lol keep up the good work cheers Kev 😀👍
Exhaust sounds good! That beam is a pain in the arse where it is, took me bloody ages to cut off my old exhaust as I had no room for the grinder.
Cheers for trying it mate. Was a thought I had and was worth exploring. Definitely wasn't happening. The Milltek sounds fantastic. Almost sounds good enough to sway me away from Mountune.
I've got the exact same cat-back (non RACE) and got Millteks sports-cat to put on, that cat safe crackle sounds spot on 👍
its perfect on the cat safe crackle. normal driving its just a mild burble so you dont sound too asbo unless you leave it overun after 4k
@@Sparkplugsteve Does the catsafe crackle not damage the car?
FROM Anthony Tessier French guy below in the comments. Steve, this is the translation for you from French mate; "Really great sound 👍 I would like to know if you can send me an SPS sticker? A big thank you to you 😜 And continue like this" ❤️
David Sutton thank you 😜
So close to ordering mine now, i love this 😅😅
Mk2 focus RS exhaust insulators are best pal 👍 i only fitted the two (on the back box) then used standard ones on the cat end of the pipe, will change them aswell if i need to in the future but they seem sufficient when that section weighs nothing 👍
I agree with the RS hangers on the back box, initially I had Powerflex insulators which were ok for a couple of years but they do degrade and go soft and can make the exhaust knock
Hello mate, just looking through your videos. I got a milltek non res race to be fitted im just wondering is it a straight fit or have I got to get an adaptor to come from the cat to make the 70mm bore on the milltek? Thanks mate
Another crackin (and poppin) vid m8 keep it up👍
I am soon to be fitting the same exhaust Steve are new bushes required do you think? My mechanic seems to think standard ones will be fine but seeing this make me want to go out and buy some new ones?
Mine Needed stronger ones to stop It Banging.
Holy shit I havent looked at your subs for ages! They’ve gone UUUUPP!!! 👍🏼👌🏼 ps another good vid!
Haha yes there was a growth spurt.
Finally someone who can actually rev
i bet the neighbours like you with that exhaust XD
I usually wake up at 5 am and always rev to the limiter before I pull off. They love it.
@@Sparkplugsteve my neighbor used to do that, I hit the roof of his car with a cooking apple (I didn't have a half ender) never happened again!! 😁
Did you use any exhaust paste when fitting your exhaust? Didn’t see any in the video? I made the mistake of not putting any in the joins and it started leaking after a while. Had to take it off and paste it up. That heat shield is so annoying, had to bend abit of mine out of the way. Love the videos, keep them coming!
No I didn't use any. If I have any issues Il just have to do it again. Thanks for Kind words.
Great video mate! Was wondering what gaskets you used? Thanks
Did you have to use a new gasket for the 2 bolt front pipe ? Great sound btw 👍
I'd advise a new gasket yes. Thanks.
Hi! I’ve just bought this exhaust and upgraded the mounts. Did you use the standard clamps or upgrade them?
Really on the Fence about the cat safe crackle , running a Miltek sport nonres with a sports cat and dont want no pop and bang map
Don't do it. It's ok for 5 minutes then it's annoying.
sounds much better now steve 👌🏻
Hi Steve, would you say race non res with sports cat could be consider by some as "too loud"?
That's got a nice note Steve thanks for sharing
Yeah I'm going to put my stock one back for belgian MOT in a few days. Not looking forward to it, then it is milltek race non res back for 2 years ;-)
That frozen themed car seat is a better mod than the exhaust; change my mind 😂
Love the videos steve
Thanks for taking the time to make the video. Maybe its just me, but that pop pop pop off throttle would get on my nerves. I suppose I could just turn up the ICE. :-)
It would me If it was constant but in reality we rarely drive around lifting off the throttle above 4k and just leaving it slow down.
@@Sparkplugsteve Makes sense, I suppose it wouldn't be too bad in that case, does it get you any more horse powers or torques? Does it feel any different to drive?
To be honest no i felt no power difference but its worth it for the sound.
Sounds great through Decent headphones
Nice video Steve, great job,car sounds awesome 😀
thank you
Sounds belter Steve !! Another top vid !!
Morning people you join me on this non raining afternoon 😂😂 Not hating just made me chuckle ha ha awesome stuff again SPS
Don't worry I spotted it too while editing. I'm Welsh. Nothing makes sense to us 😂
Spark Plug Steve lol...... Know what you mean butt only live over the mountain from ew.... Loves it ai 😂😂
Excellent video as always
🏎🏎🏎🏎🏎
another great video, what you need to do is create a Spark Plug Steve face book page so your fans can join and interact with you ;)
Thank you and yes I already have a page for Facebook and Instagram.
Another good video mate. I’m going for this exhaust when funds allow.
Great video Steve yet again
Did you need to use your old 3" to stock converter plate from the cat to the milltek? Or does it bolt straight on. Exhaust sounds great
Bolts straight on without it .
Is that the race system with standard cat
fitment on my miltek was a nightmare, ended up with cable ties around the mounts as the powerflex and the rs ones both split after not that long
My milltek exhaust bumps into the rear bumper, it's pretty annoying. And i even got powerflex bushings, that did not fix that.
sounds really good Steve
sounds sweet mate
Sounds great Steve nice pops when your doing drive by prob sound better when the exhaust has been on a few weeks I find cheers Stevie caddy2k
Fantastic video as per Steve
cheers
Another cracking video car is looking and sounding epic keep it up......;-)
Seen as Yobbo is the track car, any chance of a cage install? Haha
I don't plan on going that far at the moment. Maybe sometime In future.
I’m looking forward to the gfb dv+ video. I’ve done it on both my fiestas and what a ball ache it was 😬
hopefully get it done soon. i keep forgetting i got it to be honest.
Sounds very nice Steve 👍
That sounds awesome
Rear suspension on the fiesta looks shite compared to the St170 enough for me to stick with mine exhaust sounds nice 👍
Awesome sound that steve.
Good number plate
Good video loved the pops sounds good 👍🍺
Great work!
Hi Steve, great video as per usual. What it sound like inside the car? mine with a non res race and symposer delete, all i can hear is intake noise, even though the exhaust screams from the outside. All i can hear is when it pops or cruising at very low speeds
It sounds just fine for me in the car. Some mild exhaust noise is perfect for me.
@@Sparkplugsteve is the back of the car gutted?
@@terbor33 no standard.
sounds great steve
Wow I love the sound of this mate my mates pops are much longer and louder but yours sounds spot on
Sounds sweet Steve 👌
I actually put that fencing up around the perimeter of the bog Steve at 10.14 mad to see the housing estate didn't go to plan
What was the plans for it. They worked the land for a while flattening it out. Was it for houses?
@@Sparkplugsteve yea 100 or so houses but we found a few sink holes nearly lost the 360 excavator there's a pub close called the bog and with good reason
So what's happening there now? They just leaving it barren.
@@Sparkplugsteve think so bud probably not viable for their purpose
Steve, I need a little help from you. I'm thinking of importing a 2017 Fiesta ST-3 from the UK to Ireland. There's about 10 available at the moment but half of them have €280 Annual Road Tax and the other half €390. I'm struggling to figure out why the tax is different on two of the same cars 🤔
Also, the VRT is a grand higher on the €390 Road Tax ones.
It's about £130 a yr for road tax.
@@Sparkplugsteve So why is there two different road tax brackets? ukcarimports.ie/used-cars/e48d3bcf-a9ea-4353-8ee7-59e46
Sounds unreal even better Steve mate
Would you say this exhaust was loud on start up or under civilised driving, say keeping the car under 3k revs? I don’t want to be causing hassle with neighbours etc, and normally I’d say I don’t care about their thoughts but realistically it’s a sensible move. Need some advice if possible.
With a sport cat like I have its not loud at all really. On the motorway it's perfect no drone and not too loud at idle.
Sounds mint mate!!!!
Is this the sport miltek or the race miltek?
Great video !! do you have a sports cat ? I have the same exhaust and don't get the cracks and pops as nice as this :(
Yes sport cat.
Thanks bud 👌
@@MrMeNTh1 do you have crackle map that’s why if not
how many extra ponies does the frozen car seat add?
20bhp all day long.
What's the difference between res and none res
Nice exhaust mate. Wonder what the actual difference is between the race/none race versions.
The race is louder. this is just right for me. you can daily drive it and be cruising on the motorway with zero drone
Spark Plug Steve Unfortunately where I went had no race res’ in stock and the waiting time was ages so I ended up getting a cobra resonated, love the fact there’s no drone and from what I’ve heard non res cobras are a bit of a handful like venoms etc
Got to love a Miltek 🏎💥
Sounds awsome !!!!!!
Spot on Steve. 👍 👍
My number plate is. FP14ONX on my St. So it's new name from my daughter is STFP14ONX. Stereophonics. We should put that on UA-cam. 😂😂😂👍👍👍...
Wear some safety goggles! After being sat in a&e at 1am for 8 hours I will never not use them again 😁
I always wear a face shield but on This occasion I didn't and I got lucky the blade broke and trapped in the exhaust.
@@Sparkplugsteve I bet that was a twitchy bum moment then haha!
It really was.
Nice 👍
Will it pass an MOT with that exhaust on? Apparently they're cracking down on the noise from a sports exhaust! And failing people!. I hope not can't be doing with taking mine off.
It will pass as I have the same exhaust and It passed at the end of January
iv not heard of any issues but you never know
I think it's down to the testers discretion if he deems it to loud. I'll have to pick the right mot place 😂
burbling poptastic!
this the non res Race or normal one lol its loud haha. Would lose the farts
Does this drone on the motorway mate ? Cheers
No not at all.
Spot on mate cheers
Have you got a decat? Also is this the non res race?
sport cat and its the non res.
Vraiment super bruit 👍
J’aimerais savoir si tu peux m’envoyer un autocollant SPS ?
Un grand merci à toi 😜
Et continue comme ça ❤️
Steve, this is the translation for you from French mate; "Really great sound 👍 I would like to know if you can send me an SPS sticker? A big thank you to you 😜 And continue like this" ❤️
David Sutton thank you 😜
Can you send me a sticker ?
Yes of Course. Thier £3 payable by PayPal gift to sparkplugsteve@hotmail.com leave your colour choice of, white, grey or black and address in the PayPal notes. Thanks.
Oui bien sûr. 3 £ à payer par cadeau PayPal à sparkplugsteve@hotmail.com; laissez votre choix de couleur de blanc, gris ou noir et votre adresse dans les notes PayPal. Merci.
Wheyyyy spark plug! Got them yellow speeds yet 😀
Not yet but really close to a deal with tegiwa on the race pro set. I'm just waiting on a reply back and hopefully should get them ordered soon.
Spark Plug Steve use discount code forum25 😂
is it 25% off? cheers
just tried the code on yellowspeed website and it dont work but no probs as im discussing a deal with jonny tegiwa and hopefully we can get something worked out soon.
Spark Plug Steve might be all caps FORUM25
You'll need to get new exhaust rubbers, the halfords ones are absolute dogshit mate, they dry out crack and split in under 2 months
I greased mine up to help get them on but i think it helps keep them from going bad as quick. Deffo no the best though like you said.
What have you done with the old one
sold it
Are u at castle Combe on Saturday 30th
Yes on welshford stand
Just non res? Or non res race ?
Non res
Has your car got a decat ?
No a scorpion sport cat.
Which exhaust is this the non res one?
Yes.
3 dislikes are from evo x owners. Only joking lol sounds awesome
I can't make a single video without getting dislikes these days. Must be my face that puts evo owners off..😂
is this with a sport cat ????
Yes a scorpion
@@Sparkplugsteve just brought one, is it a pop n bang map you have on as well ???
No it's a cat safe crackle.but that map is gone now. It got annoying
Was💪💪😘😘😘
Hi mate, any chance you could drop me a message? Might have a few things that might be useful and price saving for your project fiesta
hi reece. contact me on instagram or facbook. same name as youtube. thanks
oh no, not the forced popping lol
2 tips 1 box...
Get yourself some powerflex exhaust rubbers pal
I may have to if these fail as others suggest.
You know which ones are best for this exhaust? Various different designs not sure which to order
try a saw jaw
Nice 👍
Are u at castle Combe on Saturday 30th
Yes Il be on welshford stand.
Ok coming up with my dad and our fiesta mk5
Nice 👍