Monopole Erection | Tension

Поділитися
Вставка
  • Опубліковано 26 сер 2024
  • SECTION OF MONOPOLE
    • Top Segment
    • Middle Segment 1
    • Middle Segment 2
    • Bottom Segment
    • Cross arm
    With the increase in height of Monopole the Number of Segment may increase
    ASSEMBLY OF MONOPOLE
    • The Monopole cross arms are assembled to the monopole body with bolts and Nuts and the the Bolts are torqued to its limit and kept ready for Erection
    ERECTION OF MONOPOLE
    Certain pre-requisite before starting the Erection
    • Leveling of Anchor template with tubular spirit level
    • Marking of Overlapping area so that during erection the overlapping portion are visible from ground
    The erection of monopole is very simple. The crane is positioned properly to lift the section. Once the Levelling of Anchor template is completed it is removed such that all the nuts below anchor template are at same level.
    The process for erection of complete monopole is subdivided in the following four steps-
    • Monopole bottom section is erected directly on the foundation anchor Bolts.
    • Monopole Middle section-I is inserted to the erected bottom as per the Fabrication drawing.
    • Monopole Middle section-II with cross arm is inserted to the erected Middle section-I.
    • At last the Upper section of the Monopole with cross arm is erected above the Middle Section-II.
    Situation may arise when one section does not completely overlap with other section. Under such condition, mechanical load needs to exerted
    Lubricant is also advised to apply on the inner portion of Monopole section to acquire require overlapping
    More on:
    Foundation- • Transmission Lines | F...
    Erection- • Transmission Lines | T...
    Under Ground Cable- • UNDERGROUND CABLE | La...
    OPGW- • UNDERGROUND CABLE | La...
    Pile Load Test- • Pile Load Test
    Scaffolding- • Scaffolding
    Erection- • Transmission Lines I T...
    Stringing- • Transmission Lines | S...
    Conductor Sagging- • Transmission Lines | C...
    Tower Testing- • Transmission Lines | T...
    GIS Termination- • UNDERGROUND CABLE | GI...
    Shotcrete- • Shotcrete | Gunite | S...
    Monopole Erection (Suspension)- • Video
    Monopole Erection (Tension)- • Monopole Erection | Te...
    Subscribe:
    / pritamsingharoy
    Enjoy Watching!

КОМЕНТАРІ • 65

  • @satyajitganguly3135
    @satyajitganguly3135 Рік тому +5

    The crane operator's ultimate skill is the key factor in installation 👌👌👌👌👌👌

  • @davidmonro3270
    @davidmonro3270 Рік тому +4

    The design and manufacturing process is incredible. It saves all those man hours of dangerous work. I always thought Americans are the greatest until it came to building a modern steam powered unit for vehicles. Ted Pritchard did it standing on his head.

  • @banadigan7511
    @banadigan7511 6 місяців тому

    ವಿದ್ಯುತ್ ಕ್ಷೇತ್ರದಲ್ಲಿ ಕೆಲಸ ಮಾಡುವವರಿಗೆ ಉಪಯುಕ್ತ ಮಾಹಿತಿ. ಕೃತಜ್ಞತೆಗಳು.

  • @lakshmanarao1532
    @lakshmanarao1532 9 місяців тому +1

    Excellent and skilled, accurate methods a.wonderfull mains of employees.

  • @kerjakeras65
    @kerjakeras65 Рік тому +2

    Dunia pasti tercengang bila menonton video ini...ini benar-benar sangat luar biasa...👍🇮🇩

  • @oihiksukh6516
    @oihiksukh6516 3 роки тому +2

    Really informative

  • @farooqueali2197
    @farooqueali2197 2 роки тому +1

    Very good and knowledgeable information about monopole tower erection. I request you to kindly also share video about electrical equipment installation and cable erection works for the monopole towers. I also want to learn about erection duration along with required Man Powers along with required Machinery. Thank you for very importance video.

  • @aliariftawfq5354
    @aliariftawfq5354 Рік тому +2

    Nice work and a litel bit dangerous how ever I love design the tower structural

  • @DesignConsultingServices
    @DesignConsultingServices 3 роки тому +2

    Great job.

  • @jonathanlanglois2742
    @jonathanlanglois2742 8 місяців тому +2

    The monopoles that we've got only have 2 segments plus cross arms. How many segments they have really depends on how big of a crane you have.

    • @PritamSingharoy
      @PritamSingharoy  8 місяців тому +1

      The lifting capacity of crane determines the number of segment. However lesser the number of segment, more strength the monopole have...

  • @sureshadepu7103
    @sureshadepu7103 3 роки тому +1

    Superb

  • @prafulkabadi8290
    @prafulkabadi8290 3 роки тому +3

    This is nice!!

    • @PritamSingharoy
      @PritamSingharoy  3 роки тому

      Thanks for your support. Please subscribe to my channel for more videos

  • @afrooooooooooooooo1
    @afrooooooooooooooo1 8 місяців тому +2

    we have monopole towers in Philippines

  • @shank2644
    @shank2644 3 роки тому +3

    Thank you . I work in 500kv. Can u do videos on formulas of calculating stub top. Half diagonal slope and levels n angles. Thanks

  • @raiderjaymotovlog9278
    @raiderjaymotovlog9278 2 роки тому +1

    NICE SIR!

  • @deaner00
    @deaner00 5 місяців тому

    Hello - Great video. Subscribed. Can I ask, what size of anchoring threaded rods, and nuts did you use? What calculations did you use to decide on this size?

  • @jefferykeeper9034
    @jefferykeeper9034 Рік тому +2

    One big problem with jobs like this is that more than one person wants to Guide mccane operator

    • @IamVince1aa
      @IamVince1aa Рік тому

      Yep I hate that and even more so when I can clearly see what needs to happen

    • @sunsetpark_fpv
      @sunsetpark_fpv Рік тому

      @@IamVince1aa So then why bother looking at everyone trying to guide you then?

    • @user-bu2mn8do6v
      @user-bu2mn8do6v Рік тому

      to bad they skipped the part where they set the base upright.

  • @alexsozansky
    @alexsozansky 2 роки тому +1

    Incredible

  • @sunsetpark_fpv
    @sunsetpark_fpv Рік тому +5

    MONOPOLE ERECTION!
    My bad, it's not what I though it was about 🤣🤣

  • @pjford1118
    @pjford1118 Рік тому +2

    It would suck so badly to get the base section off by a couple bolts!

  • @imbazohan1385
    @imbazohan1385 2 роки тому +1

    this monopole looks strong, im tower climber, my current tower so crazy shaking from light wind or when somebody move a bit, so scary.

  • @josepedromendes5797
    @josepedromendes5797 8 місяців тому

    Porque não tem pelo menos duas guias nesta base?

  • @geraldblackburn4883
    @geraldblackburn4883 Рік тому +1

    this has tremendous forces, note the double bolt base design, incredible, must be doing dead end forces or change of direction duty ?

  • @MauroLocadio
    @MauroLocadio 2 місяці тому

    Cómo ponen las anclas estás torres

  • @chennareddyindla2349
    @chennareddyindla2349 2 роки тому +2

    Where this Monopole is used. Is it for transmission lines?

    • @ajaykathole980
      @ajaykathole980 2 роки тому +1

      Where the place is not available for simple template or tower there it is use

  • @michaelhauser10
    @michaelhauser10 Рік тому +2

    How long did this take in real time?

    • @lethukuthuladerrick5522
      @lethukuthuladerrick5522 Рік тому +2

      I think assembling could take one day. Building the concrete base could be two days plus 28days for curing the concrete

  • @TobyCostaRica
    @TobyCostaRica 2 роки тому

    Interesting group of people in the comments 😂 I’m here because I was at a nursery and walked right up next to something like this with 2 long poles to make an A shape. Wondered how thick it was, from another plate welded looked like 1/4” thick steel. Also wondered how deep it must have been set into the ground as there were no exposed bolts. It was a few hundred feet tall.

  • @sferg9582
    @sferg9582 Рік тому

    Sorry, but a spirit level across the buttress plates is considered plumb? wow... there's got to be more than that.

  • @pkrent3461
    @pkrent3461 Рік тому +2

    Imagine if those bolts didn't allign 🤣

    • @Mani5451M
      @Mani5451M Рік тому +1

      thats why engineers exists

    • @rayjil7435
      @rayjil7435 Рік тому +1

      Template was used;

  • @Therealestrunnerluda
    @Therealestrunnerluda Рік тому +1

    Ate the splices welded or just left like a lap joint

  • @HM-hi8fh
    @HM-hi8fh 5 місяців тому

    Allowable deflection?

  • @joesanchez3646
    @joesanchez3646 Рік тому +1

    What material is this made out of?

  • @harrymulligan1133
    @harrymulligan1133 Рік тому

    @ 3:57 , so satisfying 🙂

  • @soban961
    @soban961 3 роки тому

    What is a Gusset plate? please elaborate it

    • @dcwshoreline5416
      @dcwshoreline5416 3 роки тому +2

      Triangle piece of steel. Strongest design is a triangle. Usually they are fully welded to provide extra strength

    • @imran99113
      @imran99113 Рік тому +1

      stiffeners @baeseplates

  • @nasratullahmenhaj9872
    @nasratullahmenhaj9872 3 роки тому

    HOW TO DESIGN A TOWER BY WHICH SOFTWARE IN COMPUTER

    • @adnannajem9241
      @adnannajem9241 2 роки тому

      [STAAD.Pro - Bentley] - shell element ----> advance foundation software

    • @imran99113
      @imran99113 Рік тому

      ASM tower

  • @waqasgill8700
    @waqasgill8700 Рік тому

    Hillo sir

  • @HaHa-tb8bz
    @HaHa-tb8bz Рік тому

    Baby TeSla kingDom 😍 love 😍🙏
    មនុស្ស ខួរក្បាល ឆ្លាតៗ😍 ឆាប់ចូលមក បង្រៀន ប្រជាជនកម្ពុជា អោយចេះធ្វើ បង្កូល ដែក នឹងភ្លាម 😍🙏😍👉💚