POURING CONCRETE & BUILDING GIRDERS // Not So Tiny House Build Part 3
Вставка
- Опубліковано 17 гру 2020
- Learn how to create forms and pour concrete footings plus build wooden girders or beams for the tiny house foundation! Welcome to part 3 of the (Not So Tiny) Tiny House build series, where I'm building a house in the woods from start to finish! // 📹 SUBSCRIBE : goo.gl/V5gcNJ
// Purchase (Not So Tiny) Tiny House Building Plans //
bit.ly/notsotiny
//Tools and Materials Used :
100 ft Tape Measure : amzn.to/3gP9awx
Mini Sledge Hammer : amzn.to/3oJefJu
String Line : amzn.to/376mB7V
Jet Stakes : amzn.to/378tBB0
Impact Driver : amzn.to/3gBo4WS
Rebar Wire Twister : amzn.to/38mZKEG
Angle Grinder : amzn.to/3aoy5Ws
6x6 Post Base Bracket : amzn.to/3mxu1FM
Connector / Structural Screws : amzn.to/3phDeUz
Wedge Anchor Bolts : amzn.to/2J4K0gQ
SDS Max Drill : amzn.to/3nADQUw
// Subscribe to the Perkins Builder Brothers channel! bit.ly/PerkinsBuilder //
// About The (Not So Tiny) Tiny House Build Series //
I’m building a 670 ft2 tiny house / guest house in our backyard and covering the whole process, start to finish. Why? Well, my wife and I just had our second kid and, with the addition of that second kid, our main house is getting a little cramped for guests.
In Part 2, I covered laying out the building using batter boards and string line and setting the string line to final grade. We also graded the site and dug the holes for the concrete footings. Watch here : • Foundation Layout & Di...
Part 4, which will be published on January 8, will cover framing the floor system. This will include assembling all of the joists, attaching them to the girders with hurricane straps, and finally sheathing the floor with Advantech sheathing. Make sure to subscribe so you don't miss the upcoming videos!
📹 SUBSCRIBE : goo.gl/V5gcNJ
💰 BECOME A MEMBER : / @craftedworkshop
👕 Get your Build It Yourself merch! bit.ly/BuildItYourselfMerch
📲 FOLLOW CRAFTED WORKSHOP!
INSTAGRAM: / craftedworkshop
FACEBOOK: / craftedworkshop
TWITTER: / craftedworkshop
PINTEREST: / craftedworkshop - Навчання та стиль
Catch up on the entire (Not So Tiny) House Build Series here : ua-cam.com/play/PLlG1IdP-XNnmVsgBODfKbtPu-LFi6F7bB.html
📹 SUBSCRIBE : goo.gl/V5gcNJ
Purchase (Not So Tiny) Tiny House Building Plans : bit.ly/notsotiny
Just a suggestion; I always have a form ready for a concrete countertop for excess concrete. You paid for it and you can make an outdoor table or coffee table.
Cheers.
Smart idea
Cool, I normally have some containers etc. to make yard art and such with left over concrete.
Prove it
Can you post a picture ? I think that is a great idea .
@@cheffsolo7739 I need to figure out how to post pictures but what it comes down I use whatever I can get my hands on and how much concrete is left.
Old salat containers often have some interesting patterns in them. One time used a bunch of plastic storage containers the customer had to make blocks for a bench and plant stands for him.
I try to get a smooth finish so I really work the concrete to get the air out.
On bigger stuff like the storage boxes I used a reciprocating saw with no blade on the sides of the box to rattle out the air.
I filled an almost 2’ high plastic barrel which had pretzels in it before. Sometimes I put empty plastic bottles in the concrete so they still stick out and cut them off once the concrete is dry for plants.
I hope that makes sense.
I love it because you don't hide the little mistake as your going on through. Awesome work
These are so great! I've been thinking of building my own house to live in, but I don't want it to be too big. Something smaller than normal, like what you're building here. And the thorough, deep-dive explanations spanning from permits to completion really help me wrap my head around how to actually go about construction.
Now I know why Erik & Jamie loves the cordless so much. Be kind to one another. Stay safe. Love to all
I'm looking at building a small house on my property, so this video series is perfect timing. Thanks for showing your build and progress.
Thank you so much for this series! This is exactly the kind of hard work you don't get to see in most romanticised (Not So ;) Tiny House videos! Fun AND informative to watch! Awesome job! 👍
The expansion bolts work great in a big floor, but may put too much force on your columns, and could cause them to split. You don't have any hoop strength in your column (no rebar) and concrete is brittle in expansion, great in compression. Your best alternative would have been to use epoxy bolts instead of expansion bolts. This would put very little stress on the concrete piers.
This was the one point that was really bothering me as well...
why not just use J bolts out the top while pouring. .
I’m using “J-bolt” concrete anchors 100%!
Or a tapcon
Had the same thought on fresh columns. J bolt has no stress on the concrete. The two part epoxy sold for concrete at Home Depot or Lowe’s would also be great and no stress on anytbing.
Good vid tho!
Can't wait for part 4
Good times! Missing those warm fall days!
It was 22° on the mtn today!
thanks again Erik and Jaime for telling us about Crafted Workshop channel!
This is the collaboration we all needed. Love both these channels!
I'm eagerly waiting to see the final product. Best of luck for the project.
Always good having any of the brothers or Arlow or John-o or Jason or Mr Beard to help out! Clean layout!
Finally, a thorough in-depth instructional video. Well done, guys.
I have to give you a lot of credit Johnny. Having all of this going on in the background, raising a child, and having another one while still maintaining a regular upload schedule is incredible. You deserve all the success you have achieved and more.
Thanks man! Definitely a lot of hard work hah
Looking good. Interesting info on slump. It is measured by filling a standardized cone with concrete and then removing the cone and measuring how far it droops, 3” in your case. There’s also typically an inverse relationship between strength of concrete and slump because more water in the mix means less strength but lower viscosity/higher slump. The slump however, can also be increased without reducing the strength by adding admixtures such as superplasticizer.
This mini series is so good can’t wait to see more
Really satisfying.. the way you place the casing post.. loveit.,
You never disappoint Johnny! Since the beginning always making amazing videos... Keep up the good work👏🏻
Love this series!
Excellent video and very clear. Congratulations!!!!!
Really digging this project series!
Side note: I'm surprised the structural engineer was OK with the tops of those J-hooks being flush with the top of the piers. Might want to check and see how you can protect those from rust... Usually a minimum amount of "cover" is required over rebar to face of concrete.
I guess their engineer didn't expect they would leave the J rebar uncovered. Maybe was not specified. That, and also the way they installed the J rebar into the ground where it will corrode and weaken the footings... Not good practice.
yes this is grade-A hack work, 3" mininum on all edges for metal inside concrete.
All rebar should be 3” from concrete edges. They will rust and cause the concrete to fail early. Followers should make sure to keep 3” clearance. Also, place anchors into fresh concrete is stronger. Lastly, if you drill into cured concrete, you can add epoxy to keep things tightly secured.
An Excellent Explanation ... Well Done!!!!
Good job
Like from Siberia Russia
Great work thanks for sharing
Be well be safe
This part of the process always seemed scary to me but the video made it look so easy.
such an exciting project! eager to see how your channel grows in the new year .... my cordless Dewalt chainsaw is always on our jobs... love that tool
Booking the concrete truck same day as the inspection. Brave
Keep up it man! This series is insane!
always love seeing a tradesman amazement at new tools :)
I’m about to lay out my foundation but I’m using square foot footings, makes life so much easier.
I love this series even more after Johnny have served my kinky fantasy of Total Recall Arnold's while drilling the concrete. HOT! hahaha
Hello friends. let us be grateful to our friend who posted this video sharing knowledge. It doesn't cost anything to like and make a simple comment. It is the least we can do in gratitude for his work. thank you!
Keep it up!!
You are genius guys
Great series so far! I'm hoping to build a cabin on my acreage in Pisgah Forest this summer, so I'll be watching your build closely.
That’s great! Sounds like a cool project
I never see anyone do fooding with concrete surround fooding , this house will last generation-to generation ,great job 👍
Thanks! Definitely not going anywhere any time soon!
This is an excellent complement to the Perkins Bros videos. You add "beginner" level of details who are very interesting and you have talent to explain clearly with a good speed. I am here from the video of the Perkins Bros you made with them and am glad to have found you. I will make sure to look at the other videos, I am binge watching this playlist for now. Great work and can't wait to see it finished!
That’s awesome, thanks so much Steve!
Totally outside my experience. Thank you.
No problem!
Good stuff ! ! !
Good video. Fab-form fastform footing and column plastic would probably change your life though if you ever end up doing this again.
Wal-Mart Hart tools are pretty impressive
With our garage foundation, we used the tube and board cutoffs to create extra forms to accept the extra concrete rather than have a single large concrete boulder. We haven't done anything with them yet, except to mark locations where to not plow the snow. You know when you hit one that the plants behind that line are still alive.
"Eric's first time using a cordless framing nailer" - finally!
Nice looking lumber
Wow, you got Action Bronson to do your concrete pumping.
glad I found this as I need to pour a base slab with a pillar and was wondering how to keep concrete from coming out the bottom of the quick tube. Was going to build a plywood top (covering the concrete pad with a hole for the tube to sit in) now I'm just going to mix it thicker and just pour it in. Thanks for saving me time money and energy. Great build by the way
Glad I could help!
Beautiful process, thank you for the filming and uploading your work, i am learning a lot. Greetings from Suriname, South America.
Thank you very much!
Prayers from Jamie from Perkins Brothers with surgery today hope everything is good 🙏
Suggestion for any Future builds that have large nut bolts , get yourself a Gator Grip Socket to add to your socket set ( they work great )
Nice work! I would strongly recommend not to use the expanding bolts on "young" concrete, because it takes about 3 months to develop it's specified strength. In this case nothing happened, because you drilled dead center, but if you use the bolts near the edge, they can crack the concrete when you try to fasten them.
12:30 Super cool trick!!!
Those Perkins boys are a pretty good couple of fella's. It's the Builder Buddies you need for comic relief while you build!
They’ll be in the next video 😊
Those hart brands will be big some day!
USA: freedom!
Also USA: you want to build something? You need 100 inspections and HOA permissions.
A ja myślałem że USA to kraj wolności :) u nas w Polsce potrzeba tylko zezwoleń :) > I thought the USA was a country of freedom :) in Poland, you only need a few
permits :)
Nothing about American is free anymore unless you are an illegal immigrant.
@@kurtr.8907 LOL sad but true
With freedom comes responsibilities. If you can’t be responsible, then someone need to have someone keep you in line. Sort of like little kids and unfortunately too many adults act like little kids.
@@kurtr.8907 or you are a freedom loving, patriotic American who employs illegal immigrants at below living wages because you don’t want to pay Americans a living wage.
Truck still looking good!
Wait till next week’s video 😂
awesome!
Masks outside, that's cute ❤
Allergic to fresh air.
A great tool
Great Craft
Nice my city is code free, no inspections. Build as you please lol.
your videos are well shot and the narration is well explained and is nice and clear. tks
vacuuming the concrete drill dust when outside seems overkill
Thanks! The vacuum was mainly to make sure the dust wasn't compacted in the hole, not necessarily for air quality. Although it certainly didn't hurt!
As im studing arquitecture here in mexico we build everything with concrete and I can tell you the pouring was just spot on including the resistance, nice work (by the ay love your channel)
Looks great, only thing I would say is that since you left the rebar long and had to cut some off at the top of the sonotubes is that that rebar will rust and you risk blowing out the concrete. When rust forms it has a lot of outward pressure and can blow out the concrete cylinder. At most it is 6 inches from the edge but some looked like they are lot less. Not sure what sort of fix you could do to seal the tops of the rebar and concrete to stop moisture from getting in though. Since its under the building it shouldn't get direct water so I'm not sure how likely it is to rust that much but just something that came to mind.
Pretty good
Good job
finally my question is answered on how people get all those sonotubes to the same height !! Another question - does it matter where you place that laser level?
Thanks for building with us. Oh wait, wrong channel.
That pump operator is a G. So the slump does influence the viscosity of the concrete, but it also affects the strength as well. The lower the slump (1 being the lowest, up to 8-10 at the highest[by my standards]) the stronger the concrete. When pumping concrete, most pump owners prefer a higher slump, generally a 5-inch slump or higher, with many preferring the concrete as wet as us mixer operators will make it. This is because it flows through the grates and the pump much easier, and there will be less of a chance of clogging. A higher slump also makes the cleanup much easier. Many finishers will prefer a higher slump too, since it is easier to rake and move the concrete, meaning less work for them. Many prefer their job to be easier more than they care about how strong the customer's concrete is, so there is something to be said about the pump O/O advising you to go with a lower slump. Also, while he has a point about the higher slump running out into the forming below, the low slump could also do that by virtue of its weight pushing the rest of the concrete out of the way.
Now, I will add the fact that Concrete is overengineered. a 3,000 mix will sustain 3,000 psi which the vast majority of builds will never reach, so having a bit higher slump isn't the end of the world. It's just the point of the matter that people are willing to reduce the structural integrity of the customers concrete when it is unnecessary because they want to take the easy way out.
for the slump test, you should have talk to the structural engineer.
he should have specified it when doing the drawing for the footings.
sweet content brah
Very nice
6:12 Yah, that's the dirty little secret they don't tell you ahead of time. I got that "surprise" after pouring my shop footings as well. Didn't have the excavator anymore, so I've still got my concrete 💩 outside my shop. 😂
No kidding! Would have been nice to know ahead of time.
Good job 👍🏻
We Russia делаем такой фундамент для бани, только не менее чем на 2 meters
Place the rods on plastic and then dig the leg on the ground
If three 2X12 measure 4-1/2 thick how do you use a 6" anchor bracket?
Nice project! Curios how you made concrete piers all leveled?
Clearly done during covid time...thanks for following the w.h.o. guidelines even outside! Especially since WIND exists...good for you for being smart with your health and your building!
For sure, plus my wife was 8 months pregnant. Can't be too careful.
@@craftedworkshop I totally agree! My family contracted the swine flu several years ago...hubby almost died...it's a weaker version of cv19! Whatever it is it attacked our immune system...I get sick very easy now
Hi there, Great work there m learning lots from your channel. Just out of curiosity what kind of laser label do you used for the foundation work. Thanks good luck!
Great video and very detailed. Awesome for our "intermediate" level builders :)
New subscriber dude interesting channel 😁😁🤘🤘🤘
Awesome
Pretty interesting work, dude! 😃
It's looking great!
Stay safe there with your family! 🖖😊
@craftedworkshop thanks for all the details...you are part of my research for my building in the spring
Good luck! I'll be release another long form edit of this series so it can be watched straight through.
@@craftedworkshop thanks! I am practicing for the big build with smaller ones...I hung my first door yesterday! Just tweaking the inside now but I finished building my pounding station yesterday! I repurpose items to keep them out of the landfill...which means pounding a lot of nails out...I got tired of working on the frozen ground in rain and snow....it's a cute little build with one small pallet for the floor...a little booth with a sturdy counter and windows all around that allows the wood to slide through for processing.
I need part 4, 5, 6 !!!
Moiusture in the groud will make your rebar rust. this will with time crack the concrete. Since you pushed that J-bar thingy straight down.
Should have used bigfoot forms for the concrete. Might have saved you money in the long run.
Hi
First of all, great video.
You wear a tool belt in your video. What type/brand is it?
Nothing like wearing a comfortable pair of sneakers instead of work boots on a construction site. That`s what I call professional.
But he had a mask on so he was being extra safe😵💫
7:23 Dunno what you should use that for, but next time you order concrete, build a brick mold and have them pump the remainder into your mold. Instead of one big unusable chunk, you'll have a few concrete blocks that you can use in the future.
with all due respect, folks, we are talking about 34 cents worth of concrete. Did you see the blowout when the sponge came through? Kiss you molds goodbye.
I seen Eric crowning those 2x12's
Yup, forgot to mention that!
Hey buddy, found ya from the Perkins boys. Just discovered them a month ago? Anyway, good on ya man. Peace
Which model line laser did you use for cutting the sonotubes/quiktubes?
how wise was to cut the J bolt and then drill into the newly cured post for the wedge bolt ? would not be it smarter to just use the J -Bolt or L-Bolt with the threaded rod end ?
Kerchoo!
Thank you for the video. Do you know how deep the Internet cables burry under the ground in your state?
Im here because of Perkins Builder Brothers
13:18 always gotta love trying to figure out how to put a clip in..
Hah first time loading this nail gun 😊🤯
@@craftedworkshop I say that a few times a day 😂
Great vid...can I ask why you chose pillars over a concrete slab? Im guessing land slope, which we cant really appreciate on camera. Cheers
My guess is price as well as that would be much more concrete to buy
Good work at good speed, aha!
Thanks!
Not a construction person but I think those brackets are for decks or patios. Pretty sure the required one is called ccqm. Might want to Google that