Sliding Screen Door Track Rail Replacement (Complete Guide)
Вставка
- Опубліковано 21 сер 2024
- Tools:
• Replacement Aluminum Rail / Track - amzn.to/3wZ2hjB
• Saw:
* Multi-Tool - amzn.to/32cbrLw
* Handsaw - amzn.to/3uX4tXj
• Philips Screwdriver - amzn.to/3uEshz0
• Flat Head Screwdriver - amzn.to/3uCceS8
• Shop Towels - amzn.to/3taa5wC
• Cleaning bottle (water & soap works great)
• Painters Tape - amzn.to/32cJint
• Sharpie - amzn.to/32gxjpe
• Tape Measurer - amzn.to/3dfW8rE
• Gloves - amzn.to/3t866kr
• Spline Tool - amzn.to/3wUYJPw
• Spline - amzn.to/3wVWVFX
• Razor Blade - amzn.to/3d74l15
This video works on all makes and models of screen doors. Make sure to measure properly before working to ensure it will fit properly.
Check out my website at mcfixit.us
Disclaimer:
Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT.
#mcfixit #screendoor #trackrail
Tools:
• Replacement Aluminum Rail / Track - amzn.to/3wZ2hjB
• Saw:
* Multi-Tool - amzn.to/32cbrLw
* Handsaw - amzn.to/3uX4tXj
• Philips Screwdriver - amzn.to/3uEshz0
• Flat Head Screwdriver - amzn.to/3uCceS8
• Shop Towels - amzn.to/3taa5wC
• Cleaning bottle (water & soap works great)
• Painters Tape - amzn.to/32cJint
• Sharpie - amzn.to/32gxjpe
• Tape Measurer - amzn.to/3dfW8rE
• Gloves - amzn.to/3t866kr
• Spline Tool - amzn.to/3wUYJPw
• Spline - amzn.to/3wVWVFX
• Razor Blade - amzn.to/3d74l15
This video works on all makes and models of screen doors. Make sure to measure properly before working to ensure it will fit properly.
Check out my website at mcfixit.us
Disclaimer:
Due to factors beyond the control of MC FIX IT, I cannot guarantee against improper use or unauthorized modifications of this information in the video, post, blog, or social media. MC FIX IT assumes no liability for property damage or injury incurred as a result of any of the information contained in this video. Use this information at your own risk. If you feel uncomfortable at any time. Stop and go to a professional. MC FIX IT recommends safe practices when working on vehicles, your house, or any other project and or with tools seen or implied in this video. Due to factors beyond the control of MC FIX IT, no information contained in this video shall create any expressed or implied warranty or guarantee of any particular result. Any injury, damage, or loss that may result from improper use of these tools, equipment, or from the information contained in this video is the sole responsibility of the user and not MC FIX IT.
#mcfixit #screendoor #trackrail
The aluminum rail isn’t available on amazon anymore with that link. Do you know anywhere else it can be bought?
Thanks for posting this. We live in the country, and it's really hard to get people to come out and help us fix anything. We rely on posts like this to help us take care of ourselves and our home.
Glad to hear it was helpful. Thanks for watching and commenting :)
It’s sad you couldn’t find one with an exact fit but you did a good improvisation with the spline! Great instructions all the way though!
Yes, they do sell some online but at a very very high price. The one I got was great and priced well. Here’s a link:
Replacement Aluminum Rail / Track - amzn.to/3wZ2hjB
Very clear instructions. Exactly what I’m looking for. Good content!
Glad you enjoyed it! Thank you for watching and commenting!
Thanks for all the details and being so thorough.
Thank you very much!
Really appreciate for this video. It is very helpful, and I am able to resolve my problem now. Thanks a lot!
You are welcome. Best of luck on your project
Great job 0:15
Thanks so much!
That aluminum one should last a lot longer than the plastic one!
Yes, I agree!
Great instructional video...Thank you! Just a heads-up, your link for the Replacement Aluminum Rail/Track is not working.
Thanks so much for commenting. That part comes and goes in stock. I have not been able to find a similar one to it. Have you had any luck on finding a comparable replacement part?
It’s crazy how hard it is to get out when you’re trying, but they fall out like nothing when walked through
So true... or just fall off the track when opening!
Very helpful!
Glad it was helpful! Thanks for watching and commenting!
Great video! Did you replace wheels? If not may replacing wheels would make it smoother.
No I did not, the wheels were still in good shape. My primary problem was the vinyl track being busted. Wheels might other others if they are very worn or damaged,
Thanks for sharing .
Thanks for watching!
you know if you wrapped the flat head screwdriver w that paper towel like one wrap around d you could get the corners ends better. works for me ; )
Great tip! Thanks for sharing this!!!
@@MCFIXIT you are most welcome
What is the purpose for the spline? Is that something that would be needed for each replacement?
There is a very small gap that needs to be filled with the new rail. So this is what I placed in that gap for a snug fit
Just here to fit the screen that came out from my balcony door. Followed the step you told but doesn't work I am afraid. Must be the top runners/wheels. Will try again
Part not available anymore 😢
That’s not good. I’ll have to try to find a replacement. If you find one, be sure to add it to this comment thread
When i started this project, i expected the vinyl track to cost like $10. Boy was I wrong. I don't understand why they are so expensive. Nice video btw.
Yes, I thought the same thing. That’s why I went with a metal one. It’s still working great! Best of luck on your project!
Seems you can't buy these aluminum rail tracks anymore. Your amazon link is no longer there. Where else can I get one? The Arizona heat destroys the vinyl ones,
Thanks for the heads up. I'll try to pull some old info on where i bought it. Maybe they are still in business but not selling on Amazon any longer
Here's the only info I have on it...
Brand: CRL
Model: Satin Anodized Aluminum Single Bottom Rail - D601A
I was able to pull this from my records.
After a quick search, I found this online: www.dkhardware.com/satin-anodized-aluminum-single-bottom-rail-d601a-product-8744.html?gad_source=1&gclid=CjwKCAjw1K-zBhBIEiwAWeCOF3FQRTZxLM-nj0jYCOIZHxkEur6uF1OFx5WlU5GU9r0Of40W-W6fyxoC3HEQAvD_BwE. I can't guarantee it will be the same, so you might want to call the company and ask questions about it
I don't have a channel for mine to go into (adding a screen where there currently isn't one). Can you glue the track down (and up...need one for the top too!)?
You would need to secure the track. You might be able to glue it and clamp it but it would be better if you find a way to screw it in. What is the base & top of the door made out of?
My vinyl frame is chipped on the very outside part of the runner, like where someone might hit their toe if they were stepping inside, from the outside. Do you have any tips or advice? I can't afford to replace the entire frame and door
Find out the manufacturer and call to see if you can get a replacement part for that. Otherwise it’s not looking good except for replacing it
Is it still sliding well? Any issues going with a metal over vinyl runner?
Yes it is! No issues, it seems more sturdy actually than the vinyl original part.
Ours is bent at the top track. Does that one come off too or do I need to replace the entire frame?
You will need to look at yours to determine that. Some do and others don’t. It’s less likely than the bottom strip. You should be able to put a pick or screw driver into a slot and pry up (carefully). That should help determine if the upper comes out. Mine does not.
@@MCFIXIT I am trying to get the top rail to stay up in the top track. How do I attach my top track to the frame? Thank you!!
❤❤❤❤❤
Thanks!!!
Where did you get the replacement part?
Replacement Aluminum Rail / Track - amzn.to/3wZ2hjB
They will call or email you asking for the size you want yours cut. Great customer service. I am not sponsored by the seller.
Why do they make those with cheap plastic instead of metal?
Great question. I'm sure some manufactures make them with better construction that a plastic.
I bought a new screen door and it is loose at the top and tight at the bottom. Should I add a rail to the top? Wish thier were guides I could screw in at the top
I'd adjust the bottom and top screws to create a tighter fit on the door.
The aluminum track link does not work
Sorry to hear that. I will try to do some research on where to find it or something similar to it.
I think this is what is wrong with mine!
It's a common thing to have happen over time!
That channel is discontinued
That stinks! Mine is still going strong. Let me know if you find another option out there!