Help 2007 international 4300 dt466 break pressure issues
Вставка
- Опубліковано 28 сер 2024
- breaks are very hard to puch in and makes a loud noise when coming to a stop I noticed that the stering wheel also makes loud noise kinda like they are out of fluid but they are not. Abs light stays on also. as long as I am moving down the road everything is fine. it only happens when I slow down to 5 mh or less. does anyone else have or had this problem and how did you fix it or what was the cause.
I had the same issues I replaced the motor under the master cylinder and it worked for me hopefully this fixes it
yo tenía el mismo problema, pero resolvimos, cambiando el master cilindro, con un international 2005.
I had the same problem turns out I had a bad caliper blowing all my fluid out changed the caliper problem solved. Maybe this helps
Put power steering fluid maybe is low,that happened to me
Could be connected to power steering , check for leaks .
Check the hydraulic fuse in front
Brake pressure light , ABS light, warning buzzer you can hear from 200 feet away. check engine light. Replaced ABS Module. replaced front brakes, Dealer came out to program abs, 2nd shop programmed. 9 months in the shop, I have been charged over $12,000 still not fixed! Help
Wabco module most likely bad
Get rid of Wabco system and run all new brake system probable very expensive
Did you ever get any answer for this issue
. I have the same error
Got this problem, please please please someone tell me how to solve this issue.. greatly appreciative
Did you find out what the problem was?
no, now I can't put it in gear because of the problem. it says I have low brake pressure now, but I have no leaks. I have seen where people say it is a sensor so that will be my next task when I have the money to fix it, don't know when that will be with prices going up on everything.
@@MrMADMANFTW did u find out the problem? Too your truck
My problem was the brake system under the frame behind the cab
I have same problem but it looks like either that they can help they just....WONT !!!!!!!!! Maybe I can return the favor back to them someday soooon
Did you ever get it fixed
Did u ever get it fixed
How to fix this problem it depends on your model and year. Ok
Have the same problem too 😜
What’s the problem have the same problem
the sensor on the master cylinder if you unplug it the error go's away and beeping stops so im going to change the sensor waiting for it in the mail i will let you know how it go's
So what happened
Did it fix it
You fixed?
Me too
I have the same problem
The some problem here
you found the out the issue?
I've got that same problem, any solution?
Break booster
Normal
anybody found the solution to this???? i have a error code that says abs module on dash.
Did U ever find Out what was going on with yours mine is doing the same thing with the ABS modulator on the dash
@@terrellwalker7553 bad module….the madule costed about $3k for my model an then paid for labor. These internationals are no good.
Lord that’s what I’m hoping is not wrong with mine international just quoted me $5000 for the module that’s gonna put me out of business we gas prices as well SMH
What was the ballpark figure of the actual repair not including the module
@@terrellwalker7553 try a official international parts store and see if you can get it for cheaper. That price included a core charge. My mechanic actually worked for Ryder, so he did it for only $500 since he felt my pain lol
I fixed today i know what's the problem
Where are you located
What was the fix? We have same issue in our 2007 4300.
Yea what’s the fix ... lol I need to know as soon as possible please
Some problems how did you fix it
Does anybody know what this problem is? And how to fix?
I have the same problem