New MBT Guide - How to build an MBT in Trailmakers, Spall Liners, Stabilizers and MUCH MORE!
Вставка
- Опубліковано 13 сер 2024
- Hey there folks, it has been a while once more, but i come back to you with more content, this time a bit of a remaster of one of my older videos, bringing in new techs, sweet stuff and an actual bearable audio setup
If you have enjoyed the video consider leaving a like and subscribing, i may be compelled to do more than 1 video per 1-2 months, thank you all for 100+ subs! Greatly appreciating your support!
Feel free to leave any video ideas on the comments down below, i read everything so whatever you type in my eyeballs will go through
T90M Blueprint: steamcommunity...
Songs used in video:
Emin Nilsen - Shootout
Hino da Independência
Canção do Expedicionário
Katyusha
Timestamps==================================================
0:00 Welcome
2:20 Engine Type/Count
2:50 Ground Clearance/Suspension Usage
3:50 Turret Speeds
4:30 Avoid Turret Wobble
6:05 All Terrain Tank Steering
7:54 Differences inbetween cannons
9:40 Which elevation system to use in the cannons
12:17 Stabilization Systems for the cannon/turret
21:26 Using pistons to accelerate shots
25:26 Night Vision
27:54 Heavy Quartz Composite Armor (Pin/Heavy Block/1x2 Shield Armor)
30:54 Tank Inner Skeleton Structure
32:57 Internal Spall Liner
36:18 Leave no soft spots if possible
40:16 Final thoughts - Ігри
For viewing purposes since the video is so damn long:
*Talks about agility (Engines, Turret Rotation and Anti-Wobble, Suspension): 2:10
-Engine Type/Count: 2:20
-Ground Clearance/Suspension Usage: 2:50
-Turret Speeds: 3:50
-Avoid Turret Wobble: 4:30
-All Terrain Tank Steering: 6:05
*Talks about armaments (Differences inbetween the cannon types, Cannon Movement, All Forms of Cannon Stabilization, Piston Acceleration, Night Vision): 7:54
-Differences inbetween cannons: 7:54
-Which elevation system to use in the cannons: 9:40
-Stabilization Systems for the cannon/turret: 12:17
-Using pistons to accelerate shots: 21:26
-Night Vision: 25:26
*Talks about survivability (Quartz Heavy Composite Armor, Spall Liners, Tank Skeletons): 27:12
-Heavy Quartz Composite Armor (Pin/Heavy Block/1x2 Shield Armor): 27:54
-Tank Inner Skeleton Structure: 30:54
-Internal Spall Liner: 32:57
-Leave no soft spots if possible: 36:18
*Final thoughts: 40:16
At 5:00 where you talk about wobbling servos, there is another way of doing it that id like to share, simply place a V2 heliengine ontop of the servo, with 0 controlls to it. It will act like a passthrough bearing. Then connect the heliengines sides down to the main body.
@@TarzschanoThis seems pretty amazing working!
Is nice, also it's worth mentioning where to place cameras for optics and to stabilize them as well
I combined multible of your tank videos into one, i modified your smoke screen to become a APS to shoot down cannons and missiles, i have a commander view night vision, ERA and level 3+ armour, i love it.
We keep winning brother! Nice to hear it helped you a lot
@nosferatustg7675
Thx!
My latest was my M1A2SEP.V1 with a cope/drone cage, before I saw your videos it was my M1A1 wich one drone could destroy to the turret ring, my M1A2SEP.V1 can survive 3-5 drones (with shaped charge) to the same spot, thanks for making my tanks great again!
Commander Capybara here, Great video as always!
I still need to build a functioning tank, closest thing I have is an spaa thing that only has front armour
@@reubenbielby6077 Best of luck in your quest brother! Building a well functioning tank sometimes takes time but is it worth it!
I have a severe allergy to doing short videos
Too much knowledge to spread for you to make s short video
I just got the T-90M in war thunder and it fucks
Hell yeah
Do you guys have a discord?
@@yapyarlpthegrunt I do have a smaller server where a few folks have been trading ideas and so on, if you have an interest: discord.gg/rDzSDQNg26
the FEB anthem 4:35 hehhehe nice
Best song there is
wery cool vid
Thank you! I appreciate it
Has the idea of using multiple blueprints for a tank ever crossed your mind? You could have the tank be one blueprint, then have an additional blueprint be a stronger layer of armour going around the tank
I actually already have had that idea in the past
Maybe one day i will act on it, i do have this plan of making a unique super heavy tank that is quite big and well armoured because of the number of blueprints it will take to assemble
Bro was 24/7 on overwatch i can prove
Reinhardt may not be in a great spot but i will be damned if i dont get some sick plays with my german hammer boy
Thanks this really helped me to build an mbt
You are more than welcome! Thanks for watching!
These types of tm UA-camrs are a thing !?!?
Perhaps
Now that you have given the details on the dos and donts on building a tank , how about doing an actual tutorial on building one for some of us that like to follow along in them.
I will 100% make a video like that in the near future, not only having these techs in place but also giving some advice on making it pretty lookin
Expect it in 2 weeks at most, by then university should no longer be railing me
Should I put the armor on the inside or out side because I keep have trouble with the weight as it keeps going past 5000kg/10000lb
Having the main armor plates more on the outside is better just for the better protection
Making them too deep in sometimes leaves room for explosions to pick on to some of the important internals you really dont want dying (Engines, Turret Ring...)
For my vehicles i usually make the surface layer as the most well protected one, with the insides having just enough to not shit themselves if they are hit (Like having one 4x8 holding the entire thing together, make sure to use at least 2x4s or even 1x4s with 2x4 shields in the bottom connecting inbetween them for good internal survivability with not a lot of weight)
Hurray!
É tue é br bicho, o bagulho em português lá não tem jeito.
Quantos br que joga esse jogo?ja tenho +3000 horas nesta porra e ate hj n achei nenhum
150th subscribr should have happend before
Much appreciated my friend!
u can stabalize it with some gyros and a servo on 0 strengh
What was that purple thing looked a bit german to me
It is actually hindu symbol of peace
I heard portuguese voices, are you from Brazil?
@@Rising_Ykarus Possívelmente
make tutorial pls I'm new I don't understand any of this 😭😭
Maybe in the next few days i will have a step by step tutorial....maybe it will feature a certain freedom loving tank too
Who knows, dont tell anyone i said any of that, these are all lies and deceit
I just saw one of his builds saved and what😭😭😭😭
Men, are you brazilian ?
Boa tarde, sou sim parceiro :D
Marca uma playzinha ?
@@haaahaahahahahaahhaahaa8448 Animo animo, me chama no discord uma hora ou outra, nick é só nosferatustg