Tool cart tour DIY U.S General 5 drawer
Вставка
- Опубліковано 12 жов 2022
- Quick overview of the tools I have collected overtime. If you guys take anything away from this those Tsunoda Japanese pliers are fantastic! the quality for the price is unbeatable. They’re a bit of a hidden gem. If more UA-camrs got their hands on them the price would jump like the fujiya pliers but these are better. Only negative is no warranty but that price and hi viz yellow off sets that and I’m a big warranty guy. Lots of tekton you just can’t beat their warranty and their usa made stuff is good. The Capri stuff is nice as well.
Let me know if you would like to see the tool bag or anything else here in more detail.
I have a lot of the same tools! High quality but still low cost, the sweet spot for tools.
Good middle of the road stuff. Just got the tekton 1/4” 15mm sockets to fill the empty spots in and also a Williams ratcheting screwdriver which I wasn’t sure if I was going to like but I really like it a lot. The snap on bits it comes with have a great fit on fasteners and the mechanism is very smooth. Only like $33 on eBay so worth a try.
You had a little addiction to litter pliers 😂
Just a little
What are litter pliers?
Looks like he collects tools they all look brand new but nice looking collection if you're in the collecting
Most tools were bought within 2-3 years. I’m not a mechanic I just got tired of not having what I needed when I wanted to work on items at home like personal truck or dirtbike. I also wipe everything down when I’m done and oil stuff that rust. I like nice things. The ignitions pliers is 100% a collection thing I don’t need those at all I just like them. Thanks for checking it out!
Thanks for the tour! Nice collection of tools.
Thank you I appreciate it! I started about 3 years ago since I got tired of not having what I needed in my kolbalt starter kit. Had to start somewhere though!
Well done. Nice, smartly selected tools.
Thanks guy! I really appreciate that as I take a lot of pride in my cart!
Flex head gear wrench the best way to go-more access . I have the same box at work-heavy equipment mechanic-40 years. I drilled out holes on both sides to store 1/4-3/8-1/2 drive ratchets ,extensions-punches-chisel -seal pick-stack long ext. in first and snap short ones on top of them--moved gas struts as needed inside or outside-really like this box-my most used tools are in it.
For the money it’s hard to beat! Doesn’t make u feel bad drilling holes and modifying to your liking!
Great set up! Nice find on those Tsunoda pliers, will definitely check them out.
I can definitely relate on wanting a bigger box. I just upgraded mine because I needed more space and just pulled the trigger on a new Milwaukee box.
I like the box they have with the stainless top! Very clean looking. If I was a professional I’d 100% upgrade the box but for what I do this is fine for now. More of a want than a need and I want a whole lot of stuff! Those Japanese tsunodas won’t disappoint. If more people knew about them the prices would go up easily just because the quality is there. I love the color on the handles. They get dirty just from touching but all you gotta do is wipe it off when you’re done. I clean most of my tools when I’m done using them.
I always liked Gearwrench brand ratchets sockets and wrenches
Nice set up! Great job
Hey I appreciate that man!
@@nickshowsstuff435 you are most welcome!
I have the Milwaukee wrenches too! Awesome wrenches for a pretty good price.
I really like them they feel really good in the hand! The plastic trays they come in are awesome too saves money on having to buy organizers. Now it does take up more room than some thing like a toolbox widget or something but I’m fine with it. There are only 2 negatives 1 is they can mark fasteners just a little bit easier than a wrench without those features but it’s really not a big deal unless you’re working on something so pretty that the bolts need to be pretty too. The second negative is the length. They’re not short but they’re not long I like a longer wrench but for what I do I can’t complain. They’re great for the money I’d buy them again.
@@nickshowsstuff435 yeah I was looking at several different brands and eventually decided that Milwaukee was the best one for the price I was willing to pay. They feel really good in the hands too. I’ve only had them for a month or two so I haven’t used them much yet but overall I’m really happy that I got them instead of literally any other brand. Maybe I’ll post a video of my tool cart setup one of these days.
@@andythompson3528 if you do remember me and leave a comment so I can check it out or something! I did that with another guy and remembered him. To be honest with you I have way more experience using the sae ones over the metric since Iv been working on appliances and I use my ratcheting wrenches for all of my metric work so the Milwaukee metrics haven’t been touched much unless maybe to hold a nut while using an impact because obviously we wouldn’t do that with a ratcheting wrench unless you wanna test out your warranty😂 Iv seen a few bad reviews but more good than bad. If the teeth mush or anything like that call milwaukee get a new one🤷🏻♂️ haven’t had that issue. This video has the most views out of all of mine. People love box or cart tours so you should do it for fun. Let people compliment or talk shit it’s a good time lol
Nice setup keep it up👍 Napa tools are ok .
Thank you! They’re not bad a little pricy if not on sale for mid tier tools but I like them.
Awesome setup!
Thank you!
Tools look
Never used
You look
Like you get no hoes
If I had a 93 ranger id have something to work on. Sweet jump btw.
Great tool tour; keep it up!
Thanks man! You’re videos are always in my suggestions! No idea why I’m not subbed I’ll do that now.
@@nickshowsstuff435 Thank you, Brother!
Can you do a tool bag tour please
I was actually thinking about doing one since this weekend I’m sure a lot of people would be online. It doesn’t take much I think I’ll try to get one up tonight. Thank you!
@N.S.S what pry bars do you have?
They’re Wilde pry bars. They are the OEM of a bunch of the other brand out there like hyper tough, tekton, craftsman and more.
What are the part numbers OK those Carlyle magnets?
Part #: CHT 210RC They’re made by mechanics time saver im pretty sure so you might be able to find them cheaper. I remember paying $20-$30max for them but I got them during a deal. They pop up in the flyer often the real deals catalog.
I’m at Lowe’s right now and if u want red they have the same ones under craftsman for $19.98 part#CMMT99412 the big one is $32.98 #CMMT99406 I just seen it and remembered this comment.
I like the toolbox but yet I don't like the toolbox I've contemplated on buying it but I think it will just make me mad not a fan of the open bottom
You know it’s messed up the full size cart came out about 2 months after I picked up this cart. Id go with the full cart if you’re shopping. Also about a month after I got my yellow Daytona the cool colors came out😂 it’s just a tool but still! Ended up buying my dad the cherry red one and it just looks amazing compared to my mustard Jack
Nice set up but please don’t ever try to be a motivational speaker…..you’ll starve
When a fat guy tells me ima starve I’ll be sure to take their advice. No motivational speaking for me✔️
Your shoes are brand new bro you don’t even do nothing to them there’s no oil no crap no nothing