Astra J 1.7 CDTI Idle fix Fuel pressure regulator cleaning

Поділитися
Вставка
  • Опубліковано 24 лис 2024

КОМЕНТАРІ • 74

  • @neildean7515
    @neildean7515 Рік тому +4

    Clearly you are a very professional mechanical engineer. Thanks for the video.. Most people would simply replace. Nice to see a pro clean / repair rather then buy new..Bonus is no reprogramming..💪👍🏻👏👏

  • @mralluuu
    @mralluuu Рік тому +1

    Thank you sooo much, it worked but my ring pilers didn't freaking work but I tried freeing the mechanism now it's great!🎉

  • @donemalkocev5618
    @donemalkocev5618 12 днів тому

    Благодарам многу за одвоеното време 😊

  • @leonardomelendez6972
    @leonardomelendez6972 9 місяців тому +1

    BINGOOO! Compre un opel astra 2010 y venia con los mismos síntomas o incluso peor y gracias ati pude solucionarlo ojo que no soy mecánico ni nada solo seguía tus pasos pero no exactamente igual use una lija 2000 y papel de cocina e gastado como 5 euros y a quedado de maravilla se siente y corre mucho mejor y el motor se escucha mucho más tranquilo no ise la regeneración ni nada pero me da el mismo consumo que ati una ves que lo e echo espero dure mil grasias desde zaragoza España.

  • @inigobarruetabenagandiaga7149
    @inigobarruetabenagandiaga7149 9 місяців тому

    The pump regulator valve does not always fail, more than 50% of the failures are due to the pressure limiting valve that is in the fuel rail, not the sensor, the limiter is a bolt that protrudes from the common rail rail. It remains open and the ramp pressure drops No siempre falla la válvula reguladora de la bomba, mas del 50% de los fallos son por la válvula limitadora de presion que va en la rampa de combustible, no el sensor, la reguladora, un perno que sobresale de la rampa de common rail. Se queda entreabierta y baja la presión de la rampa.

  • @malikbakar8820
    @malikbakar8820 Місяць тому

    Hi i just scv valve changes and i had egr valve cleaned but my car on first start RMP cage still going up and down. What should i do. I am tired. I invested so much money and changed many miechnik. Eveybody just chnaged something. And xar still the same. Tell me what should i do. I had changed. Oil filter, glown plugs, EGR only cleaned throat ,scv Valve presure pomp. Timing belt, battry, and few elctroc fuses. Oil and all filtors.. please help me. I gave Astra 1.7 mark 3 ,2005 1686 cm 74 kw.

  • @100criticalstrike2
    @100criticalstrike2 3 місяці тому

    I have same problem on my astra 1.3 motor
    Do you know where is placed that sensor

  • @denisredzepagic5570
    @denisredzepagic5570 2 роки тому +4

    do you need diagnostics-calibration after replacing this valve ??

  • @mbz4652
    @mbz4652 2 роки тому +2

    You don't need calibration of the scv because you only cleaned it right?

    • @diybythomas712
      @diybythomas712  2 роки тому +2

      Hi, I didn't do calibration and the engine works fine.

  • @Jean-jr5ff
    @Jean-jr5ff 3 місяці тому

    Merci beaucoup 👍🏻

  • @o.p2633
    @o.p2633 2 роки тому +1

    Super 👏👏👏👏👏

  • @citizen396
    @citizen396 Рік тому

    Many thanks!!!

  • @hphomeinteriorservicesltd7647

    Please can you explain which sensor i should spray DPF CLEANER TO CLEAN MY DPF EXHAUST

    • @diybythomas712
      @diybythomas712  Рік тому +1

      Hi, if the dpf light is on. First try going to motorway and drive for around 5-10 min in low gear, it should clean itself and the light will turn off. It helps for me.

    • @neildean7515
      @neildean7515 Рік тому

      ORileysAutos::::watch him, hes the DPF Cleaning king…
      DPF differential pressure sensor hose, preferabally under pressure

  • @Luca-ii9st
    @Luca-ii9st Рік тому

    Grazie mille acquistandolo nuovo posso chiederti se serve un reset tramite diagnostica?

  • @larryking8439
    @larryking8439 5 місяців тому +1

    Czy trzeba odpowietrzać układ paliwowy?

    • @malikbakar8820
      @malikbakar8820 Місяць тому

      Tak mam ten sam problem z moim Astry 1.7, wyczyściłem EGR. Zmieniłem świcie. Ale nic. Dzisiaj od mechanika wiedziałem z zmienić jaki sensor do Turbo. Otwarałem filtra tam nie bardzo niski poziom rupy. Wypełniłem rupy do filtry. . odpowietrzłem wszystko. Mam nadzieję że będzie okej. Co ty zrobiłes?

    • @larryking8439
      @larryking8439 Місяць тому +1

      @@malikbakar8820 nie wymieniałem. Ale zapłon włącz i wyłącz kilka razy aż pompka napompuje paliwa

  • @lovros24
    @lovros24 2 роки тому +1

    Is this the same procedure for 1.6 cdti engine 100kw?(year 2015)

    • @diybythomas712
      @diybythomas712  2 роки тому +1

      Unfortunately it looks like it isn't the same.

    • @vc6264
      @vc6264 2 роки тому

      Yes

    • @garethifan1034
      @garethifan1034 2 роки тому +1

      Matej L - I don't think so - the 1.6cdti is a different engine

  • @ramoaga5140
    @ramoaga5140 Рік тому

    Does anyone know the part number for the Astra J 2.0 CDTI 165 hp?

  • @craigmbandsoul
    @craigmbandsoul Рік тому

    1.7cdti jerking under acceleration and rough idle intermittently. Cleaned EGR, changed fuel filter. No codes but a low reading on fuel rail pressure sensor in live data? Any ideas? Would it be this?
    Thanks mate

    • @diybythomas712
      @diybythomas712  Рік тому

      Hi, I think you can try to clean it, if it doesn't help at least you know it's clean. But before cleaning it check is it the same part. Thanks and good luck

    • @xdagasx4153
      @xdagasx4153 8 місяців тому

      Hi mate,I have this same problem,under acceleration jerking and till turbo activates it has low power like not very responsive,do you manage to find the problem? Thank you

    • @agee7777
      @agee7777 Місяць тому

      @@xdagasx4153 i reduced the intake on my egr valve, much more power and accelerates faster

    • @ruulgamba
      @ruulgamba Місяць тому

      What do you mean by reducing intake of EGR?

    • @agee7777
      @agee7777 Місяць тому

      @ruulgamba you can blank it off but you will have to get it re mapped or you can reduce the hole on the intake with a plate
      .

  • @hash8818
    @hash8818 2 роки тому

    I followed video took off cleaned and installed now car won't start, I did line up the 2 holes with the hole on outside but not starting anymore?

    • @diybythomas712
      @diybythomas712  2 роки тому

      Hi, try to remove it again and clean it, it looks like the valve is stuck. It never happened to me. Let me know how did you sort ot out. thanks

    • @mbz4652
      @mbz4652 Рік тому

      Did you sorted out?

  • @james684
    @james684 Рік тому

    Which scanner can get in to a Vauxhall to reset that

    • @diybythomas712
      @diybythomas712  Рік тому +1

      Hi, you can learn it with Delphi ds150e scanning tool.

  • @arameka10
    @arameka10 Рік тому

    What if I took it out clean put back the same regulator and do the learning process via diagnostic tool, is this good or bad bcs you said only new parts have to be programmed to learn and mine is very strange now it takes more fuel than in average and gas pedal seems to be heavier on the foot, any solution?

    • @diybythomas712
      @diybythomas712  Рік тому

      Hi, you can try to clean it and learn it. But it looks like you have a different problem.

  • @B.Walker.
    @B.Walker. Рік тому

    Is this the same for 1.7 cdti zafira?

    • @diybythomas712
      @diybythomas712  Рік тому +2

      Hi, it could be the same, but I am not sure, so you need to check it before cleaning it.

    • @neildean7515
      @neildean7515 Рік тому

      I think it is. I decided to replace mine adter rough idle in Zafira 1.7cdti (2014). Looks the ssme. But check engine code..its at the back of the engine, not far from oil filter…

  • @athanathiousishag1583
    @athanathiousishag1583 2 роки тому

    I have a 2011 1.6 petrol astra J. Is it the same process for that? If so could you please tell me where it would be located?

    • @diybythomas712
      @diybythomas712  2 роки тому

      Hi, this fix is only for diesel engines (and not all have the same fuel pressure regulator). Because your car is petrol, the problem could be different from mine.

  • @michaelfraser5723
    @michaelfraser5723 10 місяців тому

    BUT I HAVE NO IDEA HOW YOU GOT IN THERE, IT'S TOO TIGHT, THERE IS NO ROOM

  • @javieralvarez9146
    @javieralvarez9146 2 роки тому

    👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

  • @Vader74
    @Vader74 2 роки тому +1

    two models exist, after 2013 astra j have other model non dissmantable double size of that early model and double the price

    • @diybythomas712
      @diybythomas712  2 роки тому

      It's good to know that, thanks :)

    • @denisredzepagic5570
      @denisredzepagic5570 2 роки тому

      Druže , dali je potrebna diagnostika-kalibracija, podašavanja, nakon zamjene tog ventila, Hvala .lp

    • @Vader74
      @Vader74 2 роки тому

      @@denisredzepagic5570 nije potrebna kalibracija

    • @vc6264
      @vc6264 2 роки тому

      No diag

  • @fernandostanic2035
    @fernandostanic2035 Рік тому

    Mine astra j 1.7cdti 130, jerks cold in first gear going downhill. Could this be the case?

    • @diybythomas712
      @diybythomas712  Рік тому +1

      You can try to clean it, but check if it's the same part. But for me it looks like you have different problem.

  • @ДаниелРусев-д8л
    @ДаниелРусев-д8л 3 місяці тому

    След откачането на буксата трябва обучение!!!!?!?@

  • @michaelfraser5723
    @michaelfraser5723 10 місяців тому

    the part is a switch, therefore it has no electronics, the electronics are elsewhere, so 'programming' is not necessary

  • @aquarioujori8842
    @aquarioujori8842 Рік тому +1

    .non potevi a farla con una torcia,non si vede un cazzo!!!!

  • @audriussakinis3818
    @audriussakinis3818 8 місяців тому

    ua-cam.com/users/shortsL-Fh1q0P2VM?si=k-6ORsXIdoLaFCRW das ist gleiche problem wie meinen sie? Danke

    • @diybythomas712
      @diybythomas712  8 місяців тому +1

      Hi, it looks like you have the same problem. Cleaning could help, but make sure it's the same part. Good luck 👍

  • @karolkarolek4073
    @karolkarolek4073 2 роки тому

    Scv

  • @rodgerramjet1918
    @rodgerramjet1918 Рік тому +1

    My car won't start ..there's a code P0089...do I need to replace this part???? I took out the part an it's long than the one in this video...it also has no clip to open it..it's solid..my engine is 17 cdti eco...nightmare for parts.

    • @diybythomas712
      @diybythomas712  Рік тому +1

      Hi, your car have different fuel pressure regulator. I would suggest to change it, and learn the system after. P0089 means there is a problem with fuel pressure.

    • @rodgerramjet1918
      @rodgerramjet1918 Рік тому

      @@diybythomas712 thanks for reply..still waiting on the part coming..also can't find fuel pump at the tank..it's not under the back seats..would u know where I should look ??

    • @rodgerramjet1918
      @rodgerramjet1918 Рік тому

      It was fuel pump in tank