The B2 comes with a cell ballanced 4amp battery in uk the A1 just a none balanced 4amp power pack...thanks for your video interesting to see what's inside am retired car mechanic and still do mechanical work and love parkside cordless tools I have complete range
I bought one of these about 2 years ago (have A1) and it is brilliant. Always reliable, easy and quick to use and up to the job. In the workshop I have the choice of both air and electric and electric wins most times. I would always use the impact sockets, much safer. (do you have a test on Parksides electric ratchet?)
Excellent. So one might as well get the A1 as it will probably be cheaper and the board might even be repairable as the parts' numbers have not been erased as is done in the B2
Because there is a specific torque value to which you must tighten wheel nuts, you should never exceed that value. And by testing how big value can achieve these electric wrenches you can easily over torque wheel nuts
А как это проверять? Сила откручивания не сопостовима с силой закручивания, если ты об этом думаешь. Это проверить можно только на специльном станке как у Torquetestchannel, который к примеру измеряет давление на сенсор двумя платами, которые сжимает болт.
@@AAAlexAlex Даже если это на первый взгляд не очевидно, но так оно не работает. Предлагаю просто почитать на эту тему. Прям первая ссылка и в точку. А если коротко, то закручивая мы растягиваем болт и сжимаем материалы, и все эти силы при откручивание уже работают на нас. Открутить получается на 10-20% легче чем закрутить. Edit: Но только если откручивать прям сразу. В течении минут.
never in my life have i seen a tyre shop (or mechanic for that matter) use a torque wrench for car wheels. just pneumatic and they keep hammering. I wonder to what torque those are set
Hi, congratulations on the video. I have an A1 400nm, and I want to install a brushless motor because the original motor heated up to the point of smoke coming out and the brush wore out prematurely. If possible, what engine would be compatible?
It is a strange question to rate the “weight” of this unit because it is basically a giant torque electric motor on the end of a handle- so yes, it is top heavy. I’ve had the chance to use it a couple times to remove tires and wheels and it works great ua-cam.com/users/postUgkx4ynqaujg7rZKFapA8s29kTpRszJGa3-K There are three torque settings so that you don’t overdo it and strip a lug. Very happy with it, especially with the price of buying it as a bare tool.
podle mojeho pruzkumu... A1 verze dokáže povolit 210nm na hliníkových discích bez většího problému. ani ne sekundu a šroub povolí. takže sme 2x ověřili že se vyplatí si ho koupit! :D i did my research with A1 version, its able to unscrew bolt from aluminum rims torqued 210nm without any problem.... it takes less then second and it loosens the bolt. so its 2x prooved that its worth the money!
Здравей колега, за какви пари взе нови я гайковерт, че ги гледам по 170 и се чудя дали са на оферта защото стария модел мисля че беше на 140 по едно време
@@voynata7426 Ами аз А1 версията я взех преди 2 години и нещо и тогава беше още по евтина - 110лв. Машинката е добра, но за 170 наистина е малко скъпичка вече.
Congrats for English speaking video, at least commentary below are restricted only to people with base language level that will raise level a lot :) Regarding test, I really want to see on torque tested as previous videos with A1 version because there is new electronic control of battery and it could be made to use more or less power that will change end result(surely not significantly). Plus I see that B2 was tested with A1. On mine side I have tested on tightening wheel nuts and on 400Nm it was not able to reach even 200Nm when I finishing with mechanical dynamometric tool.
Thanks. Still working on my hydraulic torque tester and when finished it will eliminate any doubts which tool is more powerful. And not just between those two - I'm planing to make a whole bunch of videos testing variaty of impact tools.
Здравейте!Може ли да ми напишете означението на малката интегралка SOIC-8 на платката за управление на B2, че моята изгърмя ама не се вижда означението.Благодаря!
@@icku Благодаря за отзивчивостта!Намерих и означението - EG2131.Специализирана ИС за управление на MOS транзистори. Ако на някой му затрябва- често изгаря при претоварване и изгаряне на мощните MOS транзистори.
Dankeschön, du hast auf den Punkt genau meine Frage beantwortet, ein tolles Video.
The B2 comes with a cell ballanced 4amp battery in uk the A1 just a none balanced 4amp power pack...thanks for your video interesting to see what's inside am retired car mechanic and still do mechanical work and love parkside cordless tools I have complete range
which is better?
@@Sanychmann cell ballanced battery is better
Excellent video, thanks for this comparison!!
I bought one of these about 2 years ago (have A1) and it is brilliant. Always reliable, easy and quick to use and up to the job. In the workshop I have the choice of both air and electric and electric wins most times.
I would always use the impact sockets, much safer.
(do you have a test on Parksides electric ratchet?)
I will have the ratchet very soon and will revieiw it.
Thank you, already looking forward to it.
Excellent. So one might as well get the A1 as it will probably be cheaper and the board might even be repairable as the parts' numbers have not been erased as is done in the B2
Почему не проверил на закручивание болтов в автомобиле , с какой силой закручивает ??
Because there is a specific torque value to which you must tighten wheel nuts, you should never exceed that value. And by testing how big value can achieve these electric wrenches you can easily over torque wheel nuts
А как это проверять?
Сила откручивания не сопостовима с силой закручивания, если ты об этом думаешь.
Это проверить можно только на специльном станке как у Torquetestchannel, который к примеру измеряет давление на сенсор двумя платами, которые сжимает болт.
@@oilybrakes
Бред какой-то, динамометрическим ключём дотягивает болт и ясной с какой силой он был зажат и также откручиваешь !
@@AAAlexAlex Даже если это на первый взгляд не очевидно, но так оно не работает.
Предлагаю просто почитать на эту тему.
Прям первая ссылка и в точку.
А если коротко, то закручивая мы растягиваем болт и сжимаем материалы, и все эти силы при откручивание уже работают на нас.
Открутить получается на 10-20% легче чем закрутить.
Edit: Но только если откручивать прям сразу. В течении минут.
are these brushless??
never in my life have i seen a tyre shop (or mechanic for that matter) use a torque wrench for car wheels. just pneumatic and they keep hammering. I wonder to what torque those are set
Then you can see it In Belgium if you go to the Mercedes shop in Hasselt
@@ilhancoban6106 Belgium is a different country my friend :) I'd love to visit as a tourist but won't come just for a tyre change :)
Hi, congratulations on the video. I have an A1 400nm, and I want to install a brushless motor because the original motor heated up to the point of smoke coming out and the brush wore out prematurely. If possible, what engine would be compatible?
It is a strange question to rate the “weight” of this unit because it is basically a giant torque electric motor on the end of a handle- so yes, it is top heavy. I’ve had the chance to use it a couple times to remove tires and wheels and it works great ua-cam.com/users/postUgkx4ynqaujg7rZKFapA8s29kTpRszJGa3-K There are three torque settings so that you don’t overdo it and strip a lug. Very happy with it, especially with the price of buying it as a bare tool.
Is there a possibility to replace a brushes?
If you manage to find spare - yes, you can replace them.
podle mojeho pruzkumu... A1 verze dokáže povolit 210nm na hliníkových discích bez většího problému. ani ne sekundu a šroub povolí.
takže sme 2x ověřili že se vyplatí si ho koupit! :D
i did my research with A1 version, its able to unscrew bolt from aluminum rims torqued 210nm without any problem.... it takes less then second and it loosens the bolt.
so its 2x prooved that its worth the money!
Is it a brushless motor?
No
Здравей колега, за какви пари взе нови я гайковерт, че ги гледам по 170 и се чудя дали са на оферта защото стария модел мисля че беше на 140 по едно време
За 170 го взех. Мдам преди бяха по 140...
@@icku Чудя се дали си заслужава ако беше 140 веднага го взимах 😅😅
@@voynata7426 Ами аз А1 версията я взех преди 2 години и нещо и тогава беше още по евтина - 110лв. Машинката е добра, но за 170 наистина е малко скъпичка вече.
Excellent video
Congrats for English speaking video, at least commentary below are restricted only to people with base language level that will raise level a lot :)
Regarding test, I really want to see on torque tested as previous videos with A1 version because there is new electronic control of battery and it could be made to use more or less power that will change end result(surely not significantly). Plus I see that B2 was tested with A1. On mine side I have tested on tightening wheel nuts and on 400Nm it was not able to reach even 200Nm when I finishing with mechanical dynamometric tool.
Thanks. Still working on my hydraulic torque tester and when finished it will eliminate any doubts which tool is more powerful. And not just between those two - I'm planing to make a whole bunch of videos testing variaty of impact tools.
Prezzo grazie mille
Sehr gutes Video!
Good video
Здравейте!Може ли да ми напишете означението на малката интегралка SOIC-8 на платката за управление на B2, че моята изгърмя ама не се вижда означението.Благодаря!
Продадох машината отдавна. Ще погледна на някое клипче дали не съм снимал тази интегралка, но ме съмнява.
@@icku Благодаря за отзивчивостта!Намерих и означението - EG2131.Специализирана ИС за управление на MOS транзистори. Ако на някой му затрябва- често изгаря при претоварване и изгаряне на мощните MOS транзистори.
bello, bravo, ciao
see Bricovideo OVH drillpro
1/4 inch but better than prkside perf. 4Ah (same price except battery...).
It was usefull. I have one of them.
Купил C3 версию, максимум 80 нм 🤮
dude, how about testing on 100N on all position , what nonsense it this to test on 100N tightn to unscrew on 400N :D
are you serios ?