This build is Awesome! The only thing that would make it better is if the exhaust blew the lid off another smaller toolbox, that would be hilarious. lol.
@@gieljannoe6404 That's an even better idea! Or maybe an old boot or something. It's not a real sleeper work truck until there's some trash rolling around in the back.
Who else watches this guy because he works exactly how you do on your own stuff lol my garage is horrendous but I have decent stuff and can do decent but my own projects are definitely the learning points other peoples stuff….pretty flawless
I been missing your videos man. Good to see this.. Your truck is such a badass build. Everything thing you do just gets better and better. I have always seen you becoming great one day as long as you never gave up. So glad to see you proving me right. Awesome job. Keep up the great work man...👍
Big leaps in the content ! 👌👌Iv’e been watching a few years now and i gotta say the quality of this video is of much higher quality than i would have anticipated. Be very proud of this episode. Very well done and i can’t wait to see the next !!
Fyi: that exhaust flange on the turbo is called a marmon flange. Its the typical flange on diesel trucks, since most aftermarket turbos are based off of old diesel turbos. Same concept as a vband with the clamp, just tapered instead of flat. And the exhaust pipe side is normally just flared, rather than having another machined flange.
Awesome videos!! As for welding, less heat with stainless. Base material should start slightly melting, then add filler. Slow and steady for each melted dot of filler, it worked for me! Never give up and keep on doin it, its the only way to get better!!!
I’ve been watching for a long time and I’m really stoked to see things seem to keep getting better for you, the channel . I especially like your editing of the videos your a funny fucker. Anyways CHEERS!
Really enjoyed this video, that’s an awesome shed! Only thing I’d probably do is add some kind of screen or mesh anywhere there’s venting to keep small animals, birds and most importantly, big ass spiders out!
been subbed for years mate as All your stuff is super rad! the secret boosted truck is on another level of high quality work, like there are many like this (boosted trucks that is ) but this one with all the extra work to hide everything is freaking awesome man
Always wanted to use an old tool box to hide a nitrous bottle in the bed a old el camino I was building back in the day. It was already a bit of a sleeper. Ran high 12s with a hopped up little small block that looked completely stock.. stock air cleaner and all. Sold it before it ever got nitrous. . Fun times.
Epic fam ... this thing is coming out so radical dude ... and I personally think the tool boxes is dope af and total sleeper rat rod (and that's my thing) looking ... this really gonna get spicy once ya get some injectors and a tune going ... peace and love bro keep it rad stay safe and build on... l8z famz and keep having fun
Shelby Charger.... those were badass. I had an 87 Charger, but it wasn't the Shelby. 0-60 if you were on a big hill. LoLoLoL It was a $200 car that lasted 6 months before the head blew. Traded it for 2x 15" Fosgates in a huge box. 😊
I'm wondering if the cut out should be done at the bottom of the short pipe. Then it'll block the long side when open then block the short side when closed? Just my 2 pennies. Awesome build!
I literally said you’d have a ton of turbo lag and I was right and you said I was an idiot. A goood amount anti lag can fix that but damn you won’t get that thing lit without it
Journal bearing turbos should almost never never be restricted. If they smoke its usually because you have a poor drain. If you look at Garrett or similar manuals they state 3/4 minimum to 1" ID drains should be used. Almost no one does that. Also if you look into most journal bearing turbos they have build in restriction before the bearing. I run an6's to all my stuff and I've never had one smoke. But i do use 3/4 ID drains. Prob won't put 30k worth of miles on your turbo car... so a little restriction isn't going yo be the end of the world longevity wise... But its basically a "no-no". Call up any real turbo manufacturer and ask.
I have always wondered what all of the powder overspray would look like if collected and sprayed. That's pretty cool. You should clear a part to see if it makes the illusion power change the look any since the illusion powders change a bunch with clear.
Chrysler Conquest TSI = Mitsubishi Starion The Shelby Charger was based on the K-Car platform (as were many other Chrysler vehicles in the 80's) and it had the 2.2 or 2.5 turbocharged engine. No Mitsu parts were used and Carroll Shelby just slapped his name on them, neither cars are related to each other.
I have a question. Not a criticism but curious why you didn’t just do a tonneau cover? The toolbox looks janky since you cut it up. Everything looks like it would fit under a tonneau.
I have a question, this isnt a criticism but after spending so much time and effort hiding everything in the tool boxes, why then have an exit from the top of the toolbox. Looking forward to the rod build.
It's okay with us if you don't glow as bright as an extinguished candle wick.We're used to you not being that bright.It's all good, as long as you like soup.Soup is good.Hey,the truck runs??! Well, you get a Gold Star for the day young man.Go get yourself a banana...
@@GARAGEIdiotS I’m a “mechanic” but if I had your tools experience and money I would put the fattest turbo in my car and build the engine. Wes activities mixed with you
![GIVING FULL BOOST RIDE ALONGS at Ice Cream Cruise [JeepVette RIPS!]](http://i.ytimg.com/vi/K0QO8X59ZcM/mqdefault.jpg)
FRANKENSTEIN JEEP VETTE IS ALIVE ua-cam.com/video/NH52XWF6nNk/v-deo.htmlsi=CJRk34OCeAenf4rX
This build is Awesome! The only thing that would make it better is if the exhaust blew the lid off another smaller toolbox, that would be hilarious. lol.
Paint can exhaust
@@gieljannoe6404 That's an even better idea! Or maybe an old boot or something. It's not a real sleeper work truck until there's some trash rolling around in the back.
The Drawers as Flaps...
A guy doesn't wants parts flying off,and revealing the hidden power adder. Secret, or don't bother....
Never stop making videos! I love the human error element. It shows how perfectly imperfect we all are.
But, I'm not imperfect.... 🤷🏻
😜
Who else watches this guy because he works exactly how you do on your own stuff lol my garage is horrendous but I have decent stuff and can do decent but my own projects are definitely the learning points other peoples stuff….pretty flawless
I'm sad it took me this long to find this channel but man, I'm hooked.
Good to have you on board!
The 80s dodges are getting popular.. that shelby charger is a very fun light weight turbocharged. . Jessie james just built a sick rampage
Jesse*
Learn how to spell.
Can’t wait until you get that thing tuned! Gonna make you push even harder on the jeep lol
I’m working out my cheek muscles so I can handle the smiles
I been missing your videos man. Good to see this..
Your truck is such a badass build. Everything thing you do just gets better and better. I have always seen you becoming great one day as long as you never gave up. So glad to see you proving me right. Awesome job. Keep up the great work man...👍
I love how I can tell when these videos were filmed by the weather lol
I haven't commented on your videos in a long time, Preston. That's alot of work!
Big leaps in the content ! 👌👌Iv’e been watching a few years now and i gotta say the quality of this video is of much higher quality than i would have anticipated. Be very proud of this episode. Very well done and i can’t wait to see the next !!
Much appreciated!
Fyi: that exhaust flange on the turbo is called a marmon flange. Its the typical flange on diesel trucks, since most aftermarket turbos are based off of old diesel turbos. Same concept as a vband with the clamp, just tapered instead of flat. And the exhaust pipe side is normally just flared, rather than having another machined flange.
Ahhhh, thank you! Just havnt seen one of those before
The Starion/Conquest is a mean machine, sir.
So stoked to see these coming together!!
The best thing about your videos is it shows us Idiots can be cool 😎 doing stuff that really works 💪 😊
Awesome videos!! As for welding, less heat with stainless. Base material should start slightly melting, then add filler. Slow and steady for each melted dot of filler, it worked for me! Never give up and keep on doin it, its the only way to get better!!!
Love it, put a knock off tumbler on the exhaust hole on top of the black toolbox for even more , neck turning, whaaas!
Loved this series bro just found ya after many years cant remember where i seen ya face but good to see ya at it still
Right on! Thanks man!
Nice job welding brother. Great video!!!!
I saw your short on this, so glad I stumbled upon your channel
I love this series so much!!!!!!!!!!!
Great work. Great welding
I’ve been watching for a long time and I’m really stoked to see things seem to keep getting better for you, the channel . I especially like your editing of the videos your a funny fucker. Anyways CHEERS!
Really enjoyed this video, that’s an awesome shed! Only thing I’d probably do is add some kind of screen or mesh anywhere there’s venting to keep small animals, birds and most importantly, big ass spiders out!
I’ve been watching your videos for years. Your Tig welding has gotten Nyce!
I just love your channel. I can see myself once i have started on my project...
Your channel is awesome, thank you for everything that you do!
lol this is exactly what I am about to do to my Nissan Frontier! Kinda creepy it showed up in my recommended. UA-cam must read minds.
Awesome video!
Why are you so underrated love your videos when you get big please stay the way you are love your content
That’s the plan! My friends have been instructed to slap me if I change
been subbed for years mate as All your stuff is super rad! the secret boosted truck is on another level of high quality work, like there are many like this (boosted trucks that is ) but this one with all the extra work to hide everything is freaking awesome man
Makes me damn proud Preston! Can’t wait to see what you get into next!
Always wanted to use an old tool box to hide a nitrous bottle in the bed a old el camino I was building back in the day.
It was already a bit of a sleeper.
Ran high 12s with a hopped up little small block that looked completely stock.. stock air cleaner and all.
Sold it before it ever got nitrous. .
Fun times.
8:53 Glorious dimes
Could rivet an old red rag onto the tool box over the exhaust hole flap.😎👌
Those lights are pretty badass! Here I am with $22 LEDs from harbor freight like a peasant
The truck is coming along nicely 👍👍
Everybody needs a "secret exhaust". lmao!
14:48 to 14:51. 😂😂 i felt that in my soul. Thank you for the great content 🙏 🤣
Yellow is my fav color, great choice!
Epic fam ... this thing is coming out so radical dude ... and I personally think the tool boxes is dope af and total sleeper rat rod (and that's my thing) looking ... this really gonna get spicy once ya get some injectors and a tune going ... peace and love bro keep it rad stay safe and build on... l8z famz and keep having fun
What die grinder is in your drill? That thing eats metal!
Never change Preston 😎 yet another fantastic episode ! 👍🏽
Shelby Charger.... those were badass. I had an 87 Charger, but it wasn't the Shelby. 0-60 if you were on a big hill. LoLoLoL It was a $200 car that lasted 6 months before the head blew. Traded it for 2x 15" Fosgates in a huge box. 😊
Love this! Love from Norway!
Conquest is RWD chargers/daytonas/omnis etc were fwd
try making a hole in ur exhaust to put a o2 bung in and u dont have a drill but u have a tig torch 150amps later xD
I'm wondering if the cut out should be done at the bottom of the short pipe. Then it'll block the long side when open then block the short side when closed? Just my 2 pennies. Awesome build!
I like the sleeper.
I like the welds. (much progress sir!)
I like the lights.
and
I like soup
Good to see you again.
That’s awesome
I'm guessing you got the Ryobi tools at a clearance sale at Victoria's Secret ??
Hey - cool, if they work - they work.
fender flares and a dually swap wpuld be sick
Hook that cutout line to vacuum and when it gets boost pressure it’ll open the cutout and close it again on vacuum
Hell yeah! I'm inspired to do some driveway idiot stuff. I dont have a garage so to the driveway!
Very entertaining 👏
Beware the man who's not afraid to put holes in his toolboxes. Seriously though not a GM guy, but have much respect for the work you're putting in.
Thanks dude!
Very cool
I literally said you’d have a ton of turbo lag and I was right and you said I was an idiot. A goood amount anti lag can fix that but damn you won’t get that thing lit without it
The hate on the starion was unnecessary 😂
the lag finna be insane but nothing antilag can’t take care of
Or some nitrous
Journal bearing turbos should almost never never be restricted. If they smoke its usually because you have a poor drain. If you look at Garrett or similar manuals they state 3/4 minimum to 1" ID drains should be used. Almost no one does that. Also if you look into most journal bearing turbos they have build in restriction before the bearing. I run an6's to all my stuff and I've never had one smoke. But i do use 3/4 ID drains. Prob won't put 30k worth of miles on your turbo car... so a little restriction isn't going yo be the end of the world longevity wise... But its basically a "no-no". Call up any real turbo manufacturer and ask.
Yes, dodge made a Shelby charger in the 80's. It was a turbo 4 cyl
I have always wondered what all of the powder overspray would look like if collected and sprayed. That's pretty cool. You should clear a part to see if it makes the illusion power change the look any since the illusion powders change a bunch with clear.
I woulda cleaned the dusty spot so my silver marker didn't get dirty. Genius
Drop the band saw blade guard down before cutting off your arm. Fyi from future
Shelby made a dakota too
Chrysler Conquest TSI = Mitsubishi Starion
The Shelby Charger was based on the K-Car platform (as were many other Chrysler vehicles in the 80's) and it had the 2.2 or 2.5 turbocharged engine. No Mitsu parts were used and Carroll Shelby just slapped his name on them, neither cars are related to each other.
Epic intro!!!!!
I have a question. Not a criticism but curious why you didn’t just do a tonneau cover? The toolbox looks janky since you cut it up. Everything looks like it would fit under a tonneau.
I think the janky look is what he was going for….
i want a video of like only him evil laughing
Why not make a box under the tool box with a pump and oil for the turbo has it own oil system feed line and a return line
Video idea using a compressor to boost a car or bike
I had a shelby its actually bazed off a plymouth horizon tc3
You could deliver pizzas with that truck it already has a pizza warmer in the bed.
He isnt wrong, I have an 89 Shelby Dakota...
full pull!?
Shelby GT Charger! 🤔🤔😆🤣 Science!😂🤣
love to you still grinding man we talked along time ago on i believe on FB and the content is amazing
That turbo lag is finna go crazy😂
If you only knew how turbos worked 💀
@@GreenTheScreen123 yeah?😂 why didn’t you correct me instead of accusing me? Oh yeah because you don’t know what you’re talking about.
0:18 lol
I have a question, this isnt a criticism but after spending so much time and effort hiding everything in the tool boxes, why then have an exit from the top of the toolbox.
Looking forward to the rod build.
It just felt right, but I see what you mean
what do you have done to the motor? (and what motor does it have because I forgot)
Stock bottom end cammed 5.3
@@GARAGEIdiotS what cam cause im 5.3 swapping my jeep and I want a nice cam on it and your truck sounds exactly how I want it to sound
30:12 you're welcome
Actions performed by idiots refer to your Google🤣🤣. That one line won my subscription 😂👍
At some point people arent going to believe the Idiot part of the name anymore mister.
Maybe Garage Shenanigans...lol
24:08 😂
Hey Preston if I choose the $20k from Gumout do you get to keep the truck? 😎
Don’t you dare choose the 20k haha this truck will be worth so much more
@@GARAGEIdiotS Oh I want the truck! But I would love the Jeevet too! 🏎
I luv this shit
It's okay with us if you don't glow as bright as an extinguished candle wick.We're used to you not being that bright.It's all good, as long as you like soup.Soup is good.Hey,the truck runs??! Well, you get a Gold Star for the day young man.Go get yourself a banana...
It is true
Let’s gooo
The sleeper effect is lost with all of that cam chop.
Fun build, but how dare you disrespect the Conquest/Starion SMH
Well the name is right.
😂
American Will Poulter
Pretty sure he’s American too lol
@@GARAGEIdiotSi did my research before I commented
@@aynun1647 😂
If they ask what’s in there say a ryobi pressure washer
Exactly 👍
@@GARAGEIdiotS I would let y’all do anything to my ecoboost lnao
@@GARAGEIdiotS I’m a “mechanic” but if I had your tools experience and money I would put the fattest turbo in my car and build the engine. Wes activities mixed with you
*Not a Conquest.
Whateva 🤪
"lsd doesn't work" that's because it isn't an lsd 😂
Dodge daytona
bad product promo , those lights are all sold out.
False lol
a.co/d/14xkguz