Week 28: My first EVER attempt at spray painting 😱 Bosch PFS 3000-2

Поділитися
Вставка
  • Опубліковано 7 вер 2024

КОМЕНТАРІ • 4

  • @blackdotkiller1
    @blackdotkiller1 Рік тому +5

    Your paint needs watering down it's too thick, and that is why you are getting big globules of over spray when you water it may look to thin but it will give you a better finish 👍try not to think about getting it done in one go when you thin it it will dry faster and then it's a lot easier to give 2 or even 3 coats 👍

    • @makingourdreamhome
      @makingourdreamhome  Рік тому +1

      Thank you so much for that 😊. I diluted 800ml paint with 100ml water and I was scared it was too much. But I’ll add more next time now that I know it’s ok to do that. Sincerely, thank you for your help 😊🙏

    • @blackdotkiller1
      @blackdotkiller1 Рік тому +4

      @Making Our Dream Home don't know if you had one with your spray gun but alot easier if you use a viscosity cup you can get from amazon it is a small cup with a funnel on the bottom, first mix your paint, then fill up the viscosity cup keep your finger over the hole at the bottom now take your finger away at the same time , time how long it takes to empty should be 50 seconds or less if not add more water good luck 👍the edge should end up having a fine mist rather than splatters 👍

    • @makingourdreamhome
      @makingourdreamhome  Рік тому +1

      @@blackdotkiller1 No we didn’t get one with the kit but I’m going to order one now. Thank you so much for your help - I loved the speed of using the spray gun and the easy clean-up afterwards (no brushed or rollers) but I didn’t know why it wasn’t going on as I’d hoped. This is so kind of you 😊