I've been following this series for about 2 years now. I'm so happy to see the progress you've made!! I wish I could pack my family onto a barge like yours. Take care, have fun!!
you could try longer strips of triplex(the 3 layered plywood) and steam them in a plastic bag. It softens the ply so you can bend it without breaking. Make the windowtrimmings in one or only a few pieces. Maybe for the sharper corners some cutting in the outside of the strips is needed to make the bend possible.
“Career defining cut” I love it man! You have come a long long ways in your customization. I love that freehand shelf design. Good job man. Great video work and editing. Love your channel.
Yes, I always love your notifications to see how far you've got on a project. Good job in the galley and the roof of the big boat. I hope that's a future video to enjoy. Stay safe
Loving these videos. There's so many ways to do different jobs, but it seems like you would get a lot of great usage out of a hand held router. Whether it's making a jig to cut your table into a perfect circle with it, or use a flush trim bit to match up strange lines and angles, I kept expecting to see that little tool come out instead of the jigsaw.
Dude I'm jealous!! It's all really coming along!! Your Genset. You can make an insulated box to put it in to really cut the noise. I'm going to hate to see it end!!
Kitchen looks great you are quite the craftsman now ,for those kitchen windows I would get long strips of that wood you were using and bend those corners use a iron and it will bend nice
It's always great to see a new video from you! Thanks for continuing to take us with you on your adventures. You seem more and more settled with your tasks and their presentation to us. I enjoy your approach; pragmatic and direct. Be well, be safe!
Really awesome work man! Love it! I always look forward to seeing your progress. Ohoi from Australia 🙂 Rather than using squares for the window frames what about using either a spray foam or other foam to make them nice and contoured? You can then seal the foam with fiberglass perhaps? Just throwing some ideas out there 🙂 Foam is really easy to shape with a hot wire!
3:45 Did you create a weakspot in that floor board? Now it is only holding together by a very thin strip on either side. (Depends on where the plank rests ofc. I can't see that) Maybe 4:31 makes it a bit more clear?
Very very nice kitchen/gallery. How ever I've noticed the bow windows are blocked by the bow wall. Seems you miss a lot not being able to see through them. Just a suggestion...😊
I always enjoy your content and I get a lot of tips from you, but I have 1 question. Why did you deside to put carpet in the area where you are most likely to eat all the time. Isn't that giving troubles keeping everything clean?
Yeah...not going to lie dude, the change in background music nearly made this into a horror film. I kept waiting for you to start designing a freezer and oven mount that could fit bodies or something....
The dining area looks good, but too much wasted space for my liking. With builtin furniture you get the added benefit of extra storage, and I always think you can't have too much storage on a boat
I dont know what you smoke but never, ever before has one man managed to fuck up so many jobs on just one little river cruiser, literally every single thing you have done on that yacht so far, right from day one has been botched and really looks it.
Please never ever use that circular saw with angle grinder again. If you knock metal it will take off and cut you to shreds. Not having the right tool sucks but it’s not worth loosing a finger or hand
Sorry m8, love what ya doin, but ko-fi has way to much b/s to bother with it, get paypal! If the people om the boat next to you want to watch you work, charge a fee 🙂🙂
Bernies Schrebergarten Bastelbude auf eigenem Kiel. Es tut weh zuzuschauen, wie diese einst stolze Motoryacht hier "verwurstet" wird. Schade, dass du dir nicht die Zeit nimmst, dich mit Bootsbau beschäftigst, das Projekt vernünftig planst und mit den richtigen Werkzeugen und Materialien umsetzt.
Was für ein gestückel und geflicke. Da hat ja nichts Hand und Fuss. Flickwerk wohin man schaut. Wer soll den auf den Stühlen an dem Tisch sitzen? Personen mit 175 cm und 10 Kilo?
Youre making the German Navy jealous, dude.
Hardly!
Welcome back!!!!
hey nice to have u back
That’s my favourite boat 😊
I love your videos and your humour - loved the cocky ways you scribed to fit.🤣 You are doing a spiffing job.👍😀
I've been following this series for about 2 years now. I'm so happy to see the progress you've made!! I wish I could pack my family onto a barge like yours. Take care, have fun!!
Always enjoy your content and skills on repairs, and custom work
When you were talking about distraction and the camera was panning over that boat… I seriously thought you had bought *another* boat :D
he could well have, he loves adding to the fleet.... i love the additions 😊😂
yet another stunning sound track to complement a great video
you could try longer strips of triplex(the 3 layered plywood) and steam them in a plastic bag. It softens the ply so you can bend it without breaking. Make the windowtrimmings in one or only a few pieces. Maybe for the sharper corners some cutting in the outside of the strips is needed to make the bend possible.
folding shelves with hinges, folding tabletops. Very Nice Work though. thumbs up up up up.
finally you are back! love the videos
having a nice place to live is an important part of a larger project.
The Kitchen is looking great. well done!
“Career defining cut” I love it man! You have come a long long ways in your customization. I love that freehand shelf design. Good job man. Great video work and editing. Love your channel.
Sending my ❤ from south 🇩🇰 to Berlin.
Yes, I always love your notifications to see how far you've got on a project. Good job in the galley and the roof of the big boat. I hope that's a future video to enjoy. Stay safe
Loving these videos. There's so many ways to do different jobs, but it seems like you would get a lot of great usage out of a hand held router. Whether it's making a jig to cut your table into a perfect circle with it, or use a flush trim bit to match up strange lines and angles, I kept expecting to see that little tool come out instead of the jigsaw.
SPEC-TAC-U-LAR! good eye.
Looken Good from East,Texas USA
The career defining shelf looks good . Tip would be to use a hose pipe to draw curves like that
Dude I'm jealous!! It's all really coming along!! Your Genset. You can make an insulated box to put it in to really cut the noise. I'm going to hate to see it end!!
Hi, you could use your router with a simple jig to make a perfect round tabletop!
Good work, although, after 5 months, you will swap out the carpet, for something more suitable to task.
Best wishes from Northern Canada.
Потихоньку двигаешся вперёд!!👍💯 молодец!!!💥
Good work on the windows ..... l was worried sick!!
Awesome galley!
For veneer window trim pieces use brad or tack air nailer
It's looking good.
Blessing my brother keep up the good work
Great looking work. Alan
Great new kitchen table for your boat looks really good but why didn't you build boxed bench seats so that you got some extra 😢storage under the seats
What a nice job...
Great job mate , but get back on the big steel boat 😁😁🤘🤘
Thanks for sharing. Stay safe.
Beautiful job on that galley shelf.
Looking Good.
VERY CREATIVE
Kitchen looks great you are quite the craftsman now ,for those kitchen windows I would get long strips of that wood you were using and bend those corners use a iron and it will bend nice
i'v been waiting for the video so much! good luck!
looking good, taking shape nicely...
Awesome as always
Hope you paint the screws.
Very nice job.
Fantastic
I am really enjoying following you with the boat builds. All the best with the rest of your journey 👍😀👍🛥️🛥️🛥️
This project is coming along quite nicely. Thank you for sharing with us.
Always look forward for your videos. It's looking great. Can't wait to see.👍😎 what is next.
It's always great to see a new video from you! Thanks for continuing to take us with you on your adventures. You seem more and more settled with your tasks and their presentation to us. I enjoy your approach; pragmatic and direct. Be well, be safe!
Really awesome work man! Love it! I always look forward to seeing your progress. Ohoi from Australia 🙂 Rather than using squares for the window frames what about using either a spray foam or other foam to make them nice and contoured? You can then seal the foam with fiberglass perhaps? Just throwing some ideas out there 🙂 Foam is really easy to shape with a hot wire!
3:45 Did you create a weakspot in that floor board?
Now it is only holding together by a very thin strip on either side. (Depends on where the plank rests ofc. I can't see that) Maybe 4:31 makes it a bit more clear?
Great so see a new video pop up! Love the new kitchen and can't wait for what you will do next with the big boat :)
Great
Very nice job on the galley, especially the table. But I wonder about the comfort of those chairs.
Great job, its amazing what you do. Looks so good. Best of luck with everything!!
Track list pls ❤
next time use a sealer than the paint won't bleed through and you won't need so many coats of paint.
Love the build. Keep it up!!!!
Very very nice kitchen/gallery. How ever I've noticed the bow windows are blocked by the bow wall. Seems you miss a lot not being able to see through them. Just a suggestion...😊
I always enjoy your content and I get a lot of tips from you, but I have 1 question. Why did you deside to put carpet in the area where you are most likely to eat all the time. Isn't that giving troubles keeping everything clean?
cool
👏👏👏👏👏
Yeah...not going to lie dude, the change in background music nearly made this into a horror film. I kept waiting for you to start designing a freezer and oven mount that could fit bodies or something....
👍
He has every type of boat except a sailboat and a jet ski
You might regret that carpet. But you don’t go out to sea much, so it probably won’t get damp if you insult the boat enough.
Hello
Such pontification....
Dit is ma wieder dufte
😀
The dining area looks good, but too much wasted space for my liking. With builtin furniture you get the added benefit of extra storage, and I always think you can't have too much storage on a boat
💪😎👍
I love your videos very much but the long gaps between videos 😢for those gaps we would like to see a longer video on your return please
When tugboat roof ? Where is video 😢
Please wrap those lead bricks with something!
"...eventually, redemption will occur."
Есть специальные гибкие уголки!! ( молдинги) и не надо ни чего запиливать и изобретать!!😅
Dude its not a kitchen on a boat its a galley like there's no bathroom on a boat or ship its called the head and so on. Cheers !
I dont know what you smoke but never, ever before has one man managed to fuck up so many jobs on just one little river cruiser, literally every single thing you have done on that yacht so far, right from day one has been botched and really looks it.
Please never ever use that circular saw with angle grinder again. If you knock metal it will take off and cut you to shreds. Not having the right tool sucks but it’s not worth loosing a finger or hand
Why not finish your "first boat" completely? At least the exterior of the hull to a paintable surface? Just my idea?
Sorry m8, love what ya doin, but ko-fi has way to much b/s to bother with it, get paypal! If the people om the boat next to you want to watch you work, charge a fee 🙂🙂
Bernies Schrebergarten Bastelbude auf eigenem Kiel. Es tut weh zuzuschauen, wie diese einst stolze Motoryacht hier "verwurstet" wird. Schade, dass du dir nicht die Zeit nimmst, dich mit Bootsbau beschäftigst, das Projekt vernünftig planst und mit den richtigen Werkzeugen und Materialien umsetzt.
Perhaps if you spent less time on the flotilla….😂
I have watched from day 1 but that floor repair was rubbish!! Everything you do and have done was to an excellent standard.
Your videos are fun to watch but I always feel like a murder is about to happen or something because of the "horror" music
I guess that you learned English from an American teacher, since you keep taking about aluminum, which in English is aluminium.
Man, I like your videos but please do something with the awful background music. It gives me the heebie-jeebies 😱
STOP cutting corners, do it properly or don't. Especially when you were doing so well.
cool video but the chair and the table Is ugly
Why, why, why would you face nail tongue and groove????
Was für ein gestückel und geflicke. Da hat ja nichts Hand und Fuss.
Flickwerk wohin man schaut.
Wer soll den auf den Stühlen an dem Tisch sitzen? Personen mit 175 cm und 10 Kilo?
How to for dummies😂