X-MAN TORNADO V2 M REVIEW | SpeedCubeShop.com
Вставка
- Опубліковано 20 жов 2024
- Let's just call it X-Man Butter. A Tornado is not usually this quiet.
X-Man Tornado V2 M ► speedcubeshop....
SpeedCubeShop ► speedcubeshop.com
Using the code "JPERM" supports my channel and also gives you a discount on your order.
Beginner:
2x2 Tutorial ► • Learn How to Solve a 2...
3x3 Tutorial ► • Learn How to Solve a R...
4x4 Tutorial ► • Learn How to Solve a 4...
5x5 Tutorial ► • Learn How to Solve a 5...
Special Tutorials:
3x3 One Handed ► • Rubik's Cube: How To S...
3x3 Blindfolded ► • (New) How to Solve the...
Advanced Tutorials:
2x2 ► • How to Get Fast at 2x2
3x3 ► • Beginner + CFOP Method
4x4 ► • How to Get Fast at 4x4
5x5+ ► • How to Get Fast at 5x5...
Facebook ► / jpermcubing
F2L Algs ► bit.ly/bestf2l
Patreon ► / jperm
Merch ► teespring.com/...
Algorithm Trainer ► jperm.net
Written Tutorials ► jperm.net
Special thanks to these generous Patrons:
Erika Greggs, Elliot Hargadon, Glenn Koster Jr, Talen, what a nerd, Cubing for Eternity, tim rossetti, kubesolver, Ivan Marinkovic, Gregory Martin, Jan Strohbeck, Jessica Adams, David Tu, Marius Hjortland, Jared Smith-Mickelson, Finian Mulcahy, Odd3's out, Prajot Singh, Steen Lillelund, Thomas Birdwell, Niklas Walzak, Ziggy Gelman, Seth Crouch, Vini Villeda-Rosa, Will, Klára Németh, Shayan Gupta, Bruhath B, Chris Bonnello (Autistic Not Weird), Benjamin Force, James Moore, Dmitri Shabes, Skefull, Amay Saxena, Jane Qiao, Philippe Schwartz, Derek Wong, Paddy Duddy, Supple Wrist72, uche, Toby Crumpy, Saulo Sardeiro, Riley Lim, Sean Coetzer, Conner Glover, Nicolas.M, senders, Kibzor, panda_pajama, Khang Tôn, Jay Hoover, kyle, Poor Junior (We All Can Relate), Dominic Klyve, Andy Henline, Bob Brantner, Declan Manning, Michael P Deslippe, Stanley Wesley, Murtaza Azad, Fuzzy Sanders, Cubing Madness, Mark James, Spencer Gray, Tom Blanco, John Adams, RedKB, Letin, Chris Cobb, Allan Chochinov, Martijn Schiedon, David Brown, Taco, Mike Sampson, Rob Peters
Music:
KC4K - Barracuda
sakura hz - chill
Mikel - Dark World
Ikson - Horizon
Having this puzzle myself, I find the reverse corner cutting solved with higher strength magnets. While it does slow the cube down a little, the magnets become very strong and rarely it gets misaligned. If the slowness becomes too much, lube is always an option. My personal settings is 4 inside the circle, 3 outside, and 4 magnet strength. With these setting my puzzle performs better than anything else I own.
What is your pb on it ?
better than the wrm 2021
@@msn2005 that one’s too fast
@@msn2005 agreed
You add some dnm 37 drops and you should be good riht? It is bc im buying the cube and i wanna know
J perm's ”Hope you can read Chinese " joke never gets old.
Me who is chinese:
I am 4 parallel universe ahead of you
Imagine all of us retired and sitting in front of the TV to hear J Perm say ' Hope you can read Chinese.. '
Unoriginal commet for free likes
it lasted longer than the amogus memes
@@gauthamgopinath3362 I'm actually Asian lol
"This is a highly customizable cube, as long as you can read Chinese."
After a while, we've just learned to accept these jokes.
Sussy moos
Lol
@@warmachinewr7491 hmm mar
That joke is traditionally used in his Unboxing / First Impressions.
I got caught off-guard when he used it here.
@@felimonerguiza7512 lol pretty smooth transition to the joke
Here are my thoughts on this cube:
The regular corner cutting is quite bad on the first day, but with a bit of break in it improves. Unfortunately you can’t change the reverse corner cutting, but I was able to get around it (particularly because I am able to change my turning style based on the cube).
I did try every single setting on it (including the magnets) and I discovered that I was able to do well on most of them, and the worst ones weren’t as bad as my average.
I’d say only get this cube if you like very stable cubes, and you can tolerate worse corner cutting. Like J Perm said, if you do use a lot of corner cutting, you won’t enjoy this cube.
“This is a highly customizable cube, as long as you can read Chinese”
Jokes on you, I learned Chinese just for this purpose.
@Mathis Lacroix imagine not already knowing Chinese lmao...
@@kiwicuber yeaaaaa ikr i also knew chinese from the second i was born :)
I didn’t think an undo reverse card could be this big
No wonder you have Crazy in your name
@@cubing7276 wait i thought it was a da not a tou
I've had this cube for over a month now and I'm so happy with it haha. Yes I run into some lockups sometimes, but the more I get used to the cube the better it feels. Also just love how quiet and smooth it is, the customisation is so easy too
Im excited for my tornado v2 its coming in two days
@@monyty1542 I'd be far more comfortable recommending the worm 2021 over the tornado as the corner cutting is much better and you still have the range of customisation that the tornado has
@@fc3x336 i was going to buy a wrm but it was out of stock and the next best thing was the tornado v2
@@monyty1542 have some patience lmao
@@fc3x336 bruh it takes them months to restock
I just ordered this cube
So thanks for all the customization
J perm: This cube is quiet
Me: Turns up volume
J perm: Starts to talk
Me ears: -_-
A
Im so happy today!😃
Cuz i got my first sub 10 solve(9.618)
And i have been cubing for only a year and a half!
So i wanted to say tysm j perm for all the tutorials i’d never make it this far if its wasn’t for u
Congrats
Nooooo. Of course I am not jealous as a Sub 24 cuber (creepy laughter) ahhahahahaha
Great my PB is 6.93 ! I have a reconstruction of the pb on my channel too!!!!!!
Congratulations! Here's to more PBs!
@@capabilitymaster4034 wow thats rlly fast 😯
For me this is my main now
It's incredible performance for me
What is your setup?
@@OptimusCubing1 traxass 50k or weight 5 lube with any lube that improves control I added silk and then if u think the cube is slow then u can go for dnm 37
And my preferred setting
Inner ring 2
Outer ring 4
Or
Inner ring 1
Outer ring 2(as jperm said )u try both and u choose which one u like
@@yaseenkn8179 where u put traxas 50k? In the core, piece or track?
@@FreddyTanusina_ track
@@yaseenkn8179 oh yeah, and what your magnet setting
The fact that in one minute there is 82 comments proves how amazing Jperm is
or it proves how many kids are here cause they are commenting before watching video
There was a "First" and "Not First" spam early on.
And I saw a lot of comments like "Oof!" as if it proves how amazing JPerm is.
@@macubing7318 In this pandemic situation, it is advised not be positive, and rather negative.
@@Luffy_wastaken 😆
@@Luffy_wastaken LOL
To fix the caps popping out, make sure they are put in correctly. If you look inside the corners of the caps, you'll see one set of diagonals has tabs and the other does not. And if you look at the center pieces you'll see one side has little holes for the tabs and the other doesn't. Make sure the tabs line up with the holes.
Hot take: After using the cube for about a month, I find the sounds that the center caps make when you press on them and they click back into place quite satisfying. Anyone else?
Find them what?
the general clicking sound of the core customisation is so satisfying, i often find myself jumbling up the settings and clicking them back to where i like just to hear it click every so often between solves.
Yes but the center caps pop too easily
Just putting a bit of pressure on the cap pops it
I LOVE IT!!!
@@anshumanagrawal346 satisfying
I was about to type my comment about this cube when I read the first line of the description. Gotta say you have a very solid point lol.
I've had this cube for a few months. After like three days it became my main over the MGC elite. Amazing cube
This cube is my main (set on 4 for the inside and 2 for the outside). I solve with roux and average about 21 seconds. I mainly love this for the speed and ease of M moves. Being a slower more precise turner I have no issue corner cutting
what magnetic strength??
I’ve been maining this cube for over a month now. Using the 4th spring compression setting, 2nd tightness setting, and the 4th strongest magnet setting I’ve found works well for me. One thing I’ve noticed is that the magnets on this setting are rather clicks sounding. But this was the cube that finally got me to stop maining the YLM.
Got mine recently and loving it, i used a few drops of cubicle silk, the magnets are on setting 4 and the springs and tightness are both at 2 for everything, i also opened the box correctly, the bag feeling is great and the unboxing and use feels just like if not better :)
If I had a cent for every cube released this year that looks like a gan but isn't a gan, i would have 2 cents. Wich isn't a lot but it's wierd that it happened twice.
which 2?
@@ZuhairKhan probably the MS3-v1
Don't forget about Dian Sheng Solar S
Grian reference?
@@miwwnikk Dr. Doofenschmirtz
Could you make an “office guide” video where you compare quite cubes and how to dampen them?
Perfect! I ordered one of these just under a week ago. Can't wait!
I've already got mine from JPerm's last vid on it. The corner cutting is forcing me to be more precise. JPerm explains it well. I'll be interested in hearing your experience. To get the best of the corner cutting, I've gone all loose, with settings of 1 and 1. But, it's still stable with almost no floppiness. The magnets are really strong. I have never before reduced the magnet strength on a cube, yet I've set this to the weakest, I can still feel it. Aside from the corner cutting, I really love it's feel. I haven't even messed with the lubrication yet. So, that's it. This is the cube I'm using to improve my precision, and it feels pretty good.
Yay happy 🙂
Update: as I get used to this thing (and maybe having improved my precision), I've put the magnets back to the center (with spring settings still at 1 & 1). I had also thought that the core already had lube, so I hadn't bothered with that. Well, I wanted to smooth it out some more, but I usually only use very light lube. Well, I had some GAN lube that I wasn't using and did the core with that. That was nice. But, only the core had lube. So, I did the outer surfaces with Speed Cube Shop Start Dust. OMG, the corner cutting is definitely improved (though not perfect), and it feels amazing. I definitely want to hear how others are tuning this one.
0:35 Thank you for the sound comparison!
J perm in 2021: “hope you can read Chinese”.
J perm in 5021: “hope you can read Martian”.
lol
Pyraminati
5021: "Just kidding, there's chinese instructions on the back"
Is jperm Chinese?
@@miliondoge3062 I think so
Got this cube on Saturday, had for about 5 days. This cube is perfect for me, since I consider myself a very accurate turner. My previous main was the GAN 11 M Pro, and while I could get very fast times, I didn’t feel perfectly comfortable with the cube. I switched to this cube because of its soft and effortless turning and its similarity to the Dayan Tengyun v2, Dayan Zhanchi Pro, and the GAN 356 X.
you have changed your maincube to tornado cause you feel uncomfortable with your before main (GAN 11m pro), so give me your cube please 😊🙏🏻
@@mazayamuharrima2052 Like he got it for 0.01 dollar
Hi JPerm, I suggest you look under the screw in your X Man Tornado V2 M. Since you have that reverse cutting issue, I haven’t noticed it yet when I tried it from a friends, but they looked under the screws and there was a thing caught.
Lubing and seeing it again, the cube started working like magic. I hope this works even better.
TLDR: There maybe something getting caught in the internals of your Tornado. Try disassembling the springs, the core, and the pieces and inspect them.
realises that the screw is almost impossible to disassemble
Your the best J Perm learned how to solve a cube from you about a year ago and I have made so many cubers and made so much improvement thanks J Perm.
Your biggest fan Ryne
Great video as always! I think there is a certain way to put the center caps on so the don't come off like how you showed with cornercutting. I don't have this cube but I've noticed there are latches inside the cap and I've heard you have to take it off and put on in a certain way.
What cubes would you recommend for 2021
I fell in love with that cube as soon as I saw the first picture 😍
I hope to have it soon!
I got Tornado V2 today from the giveaway! And it is so smooth and fast turning! 🔥
for me (as a person who relies quite a lot on corner cutting), I actually find it to be okay for me to main (averaging 13). I'm finding the reverse cuts to be a slight problem and (this might be a settings issue) I tend to overshoot a lot and I make more mistakes on this than something like a gan 11 m pro which I can control better. I've tried to main it, but probably just not for me
Maybe tighten the cube and set the magnets on the stronger settings.
@@monyty1542 well now I average 10 and I have found other cubes to be much better options (eg the worm 2021, gts3m and the 11m pro) just because they have much better corner cutting and overall I prefer them over the tornado
This cube is amazing . I didn’t expect very much at first from it being pretty cheap compared to other cubes, but after a bit of lube and finding the right settings, it would be my main if it wasn’t for the TengYun V2. My currnet settings are 1 for the screw to get better corner cutting , and 3 for the spring . For the magnets I use the middle setting
what do you average with the tengyun? I couldnt get it to work for me due to huge amounts of lockups and corner twists and mistakes which didnt occur on cubes such as the 11 m pro
@@fc3x336 about 26 seconds ( my normal average ) . On the Tornado I average around 1 second slower
Keep magnet strength at 3 and the other settings at 2, it feels amazing. try i once if u have the xman tornado v2
My tornado v2 is coming today im going to use that setting
Should l learn Chinese?
Yes
Yes
Yes
Yes
Yes
The "hope you can read Chinese" joke vs all the end screens jokes, I honestly can't tell which one are the best
You mean you cant tell
@@SagarCubes ikr
@@SagarCubes you're Goddamm right, friend, those keyboards auto correct feature always messing us up
I first heard about this cube from the SCS channel. I could tell by the way he was struggling a bit that this cube has an issue with reverse corner cutting.
Yes i love the Marques Brownlee tornado v2
I randomly bought this cube a few weeks back. I think it is my favorite cube.
That's me too. After getting this cube I stopped shopping for cubes. The Tornado V2 M has such a great feel that I practice more. More practice has steadily improved my times.
It is a tradition , we cant stop watching Dylan's vids
Hey that's Beluga
@@govardhants5553 lmao i swear i dont copy beluga
Sup my friend
@@MrMintyGluta chào
@@RieSubaru0 hahah
Maybe there are going to be tons of comments about center caps.
But I still want to leave one here,too:
The center cap direction is restricted.
Be careful cause force it in with wrong direction would break the inner clips.
I have the tornado v2 and one annoying problem I have is that when a corner twist happens, it can accidentally change the magnet settings so I recommend keeping the tool with u if u r cubing
X man colors are so beautiful and that black background
Love those timer sticker designs. The stickers for the timers was a really good idea
0:43 i love that sound
i got it, set it up, made tensioning to the loosest and i never had the problem
That cubing mat was so satisfying
Can't wait for the v3 review! It just came out!
0:46 That cut is smoother than my brain
Hi J Perm
I have the V2 from SCS ,and I really like it . I don't turn at your speed ,but agree it's super smooth .
I also made a note book with a lot of your instructions on solving that I refer to many times .
Great video ,thanks
0:37 keep that on loop lol
Finally.
This is a review that I can trust.
Yeah I wish more fast people did reviews
Yeah no offense but no one likes to watch cubesolvehero reviews or soeedcibereview’s reviews
@@aahanghose974
Agreed
For it to be a review, cubes need to be tested out for a while.
CSH just looks at the specs and makes his first impressions.
SPR just does a few solves and makes his final judgments based on that.
one thing i like about the tornado is that it has standard black internals
I do turn quite accurately and I main this cube as this is really amazing. I use the same core settings but different moderate magnets Thanks for the advice on settings J perm👍
I got this cube a few days ago and really like the slightly smaller size, adjustability, and bold colors. As you said the corner cutting isn't awesome and it does lock up a tiny bit. It's fun to play with the magnet strength but generally it does feel a bit tight overall. I also found if the magnets are set above medium that the edges can grind against each other a bit which is annoying. I'll try your settings which are a little looser than what I was using.
You have to snap the center caps in to avoid it popping off.
A jperm video and my headphones are working AND I got all the stuff for my wii to work. This is a good day
5:25 lmao I love how it actually corner cut
that timer sticker is amazing
Hey Dylan. I got a question. Where do you make your images for previews with cubes where there are some grey pieces for showing unsolved steps?
many years has passed jperm without intro is still goin strong
dk y but i just clicked on this video cuz i was bored and this somehow motivated me to start speedcubing again and achieve sub 15. tysm jperm, altough tbh i dont even know how you did it xD. ty either way
His voice gives ASMR.
Smart cubes have improved a lot over the years .It would be nice to know about your opinion on smart cubes right now like the gan 356 I carry .
Smooth like butter
Thanks for the great reviews J perm!
i have had this this cube for nearly 3 months now. i just crushed my pb for the 3rd time since i got it. i LOVE this cube.
2:20 Thats an Optical Illusion cuz whenever u turn ur eye it looks like all of them turns.
That timer skin looks dope..💯💯
Man i think and hope you reach 1 million by this year!!
Btw i love the the look and sound of this cube
I don't rlly cube much anymore but I still watch this guy just because
Which is better
1.XMD Tornado v2 m
2.Gan 356m
Yes! I've been waiting for this!
V2 M really is the typical cute name
I love this cube, is is my first magnetic cube. But corner twists do happen sometimes
Would you try making this cube your main?
Just a bit curious
J perm has always something to teach us
The “hope you can read Chinese” somehow always surprises me every time
Okay, many people are saying that the tornado v2 has bad reverse corner cutting. It's not optimal, but it's not that bad. The tornado has stronger magnets, compared to the other cubes that I've tried. The stronger magnets make lining up the pieces way easier, so corner cutting doesn't even matter. As someone who relies on corner cutting to turn and solve cubes, it's not even a problem for me.
Every week I wait for your video I really love your content please continue making them I love it💜💜💜💜
Hint - Cap can fly off unless notches inside line up with the rectangular holes in the centers.
Try the cuber's home edition it fixes this problem
My settings are 1, 1 with +1 magnet strength. My second preference is 5 elasticity, 3 core tension, with -1 magnets
I got this cube and damn it’s good
What are the best settings for this cube
@@prabhakarbolla807 I like to use 2 for the outer setting and three for the inner and also three for the magnets there isn’t really a best option you have to try the different settings and choose which suits you well.
I find it really pleasant feeling
hey j perm i am looking for a new cube. i am still using the ms 3x3, but i dont want to spend up to the 11 M pro. is there a good cube you would recomend?
I love you bro you are the best cuber
Can you make a review of the Dayan Zanchi Pro
Hi J perm can u compare mgc evo and tornado v2 as both are in same prices and there is a lot of confusion which to buy. Please make a video and reply.
you can try the tension 1 / spring compression 5. compliments both the cube's weakness :)
That's so smooth.
Will you make a WeiLong WR M 2021 review?
After along time "REVIEW" is back ✊✊✊✊
Have you ever try the CH tornado? The corner cutting in CH version is much easier.
I have been waiting for your review on this cube. I just bought this cube. Haha. Thank you for the review :)
Do you solve a mastermorphix
J Perm
-Do you like Xman tornado v2 or WRM 2021 ? which is your main
Are you going to make another creator cube
I can't believe I'm doing this but, 0:24 *SMOOTH LIKE BUTTER*
Just a thought, did you put on the center cap properly, lining up the clips on the cap with holes inside? That is the design to prevent the cap popping out.