It’s always going to be easier when the boiler is off the wall and empty but the motions you’ll go through to get the job done will pretty much be the same 👊
Can’t understand why you went to all the trouble of disconnecting the diverter valve assy , to remove complete pump you simply do the following 4 steps takes 10 min max , 1: drain down withF&R isolating valves turned off 2: pullout pump clip , and disconnect nut to expansion vessel . 3: undo prv nut from under the boiler and pull out prv . 4: disconnect 28mm brass nut from on top of the pump connection and literally pull pump to the right off diverter valve connection and out she comes . You really made hard work again if that removal . Try these steps next time it’s really so much quicker , all the best keep making your videos .
Hi. Just wanted some info.. My valliant pump has seized . I've brought a pump. I wanted to d.i.y job , Just wanted to know how I'd go about it. Isolation.drian the boiler and then change the pump or pump head? Would that be correct?
Update: didn't use the boiler for 8 months due to renovations. I only had to unscrew the bolt on the pump, turned the pump manually with screwdriver. And that started the pump again.
I ve just seen ur videos about changing the components, plz make some some videos such as phe change, fan change , and burner change,thanks anyway u r a star
Hello Mate,got question about Vaillant ecoTEC plus pump. There is a little gray valve,what is this? Should it be shut or open? Please let me know. Thank you
Bro in real life u won't be disconnecting everything as shown in ur video. It's a lot easier than that to remove the entire punp. it's only a 20 mins job max.
Good stuff. You make it look easy bro.
It’s always going to be easier when the boiler is off the wall and empty but the motions you’ll go through to get the job done will pretty much be the same 👊
Another top video brother. Keep it up 👍🏻
Thank you Amin!💪
Thanks Great help just got the new control knobs ,saved getting engineer out .
Your videos are gold for trainee gas engineers but not so great for do it yourself engineers 🤣
Tanks for doing video help me so much
Can’t understand why you went to all the trouble of disconnecting the diverter valve assy , to remove complete pump you simply do the following 4 steps takes 10 min max ,
1: drain down withF&R isolating valves turned off
2: pullout pump clip , and disconnect nut to expansion vessel .
3: undo prv nut from under the boiler and pull out prv .
4: disconnect 28mm brass nut from on top of the pump connection and literally pull pump to the right off diverter valve connection and out she comes . You really made hard work again if that removal . Try these steps next time it’s really so much quicker , all the best keep making your videos .
My thoughts exactly
Great man
thanks very much keep the good work top video
Hi. Just wanted some info..
My valliant pump has seized . I've brought a pump.
I wanted to d.i.y job ,
Just wanted to know how I'd go about it.
Isolation.drian the boiler and then change the pump or pump head?
Would that be correct?
i need to change the pump in my boiler. I hope i can do it with this video.
Update: didn't use the boiler for 8 months due to renovations. I only had to unscrew the bolt on the pump, turned the pump manually with screwdriver. And that started the pump again.
Thank you 🙏
I ve just seen ur videos about changing the components, plz make some some videos such as phe change, fan change , and burner change,thanks anyway u r a star
nice, after that is it required any procedure to start/pressure up or just turn ecotec on?
Made look easy good job
Hello Mate,got question about Vaillant ecoTEC plus pump.
There is a little gray valve,what is this? Should it be shut or open?
Please let me know.
Thank you
Did you ever find an answer to this? I'm trying to find out too. Thanks
@@paliman No mate
Why would you need to change the pump body ?
Usually it’s because the plastic body has cracked and leaking. Otherwise you can just change the pump
Head
You forgot to mention the holder plate screws underneath
Just change the head if the body isn't leaking
Bro in real life u won't be disconnecting everything as shown in ur video. It's a lot easier than that to remove the entire punp. it's only a 20 mins job max.
Yeah I’ve realised that now 😂 should probably make a new video