Loved the colour of the van, I'm thinking of upgrading to a master, like you I'm a bench hand joiner so that sides covered has for electrics just going for leisure batteries to run odd light and radio in back, no plumbing bottled water poured into bowl and wash practical and SIMPLE like me. As long as I have storage for fire wood and my fire extinguisher which I have made into a beast of fire few bears to sit round fire, then I am as happy as a pig in the you know what? I have seen your little red Mercedes so I know the quality of your work, I am no good at attaining all these niftie little this and niftie little that off computer. Anyway thanks for sharing your projects, cheers pal
I love this van. Great job. I just got my hands on a 2005 master, mini bus. I've 3 kids and i mountain bike so I'm going to build this exact van. Do you have general plans that I could buy off you. I'd like to get dimensions on bed size. How is bed frame constructed? Where about are the 3 seats set up in the back. Cheers man. Inspired!
A love sprinter done fair bit of work on them before but a no if a buy one al have dpf egr fault or it will blow up or something. A no the renault is littel Tammer on power the engine not to bad to work on. See like to have one to fit three moterbikes in back with a bed that is adjusterble in hight so can fit taller bikes in and if going with no bikes can Lower it down.
Hi guys. How did you connect the roof rack into those 2 holes on the roof? I got the interior done so insulation lining etc do I need to do from inside?
Hi mate I have a renault master as well, what did you do with the windows, just curtains? Just cause living through the winter I'm thinking curtains won't be enough insulation, and I don't wanna board them off because I like the day light. Cheers Finn
Ye initially I build them for my self but e I always seem to make money on them. This particular one is still with me. It’s just perfect for what I need.
Hi we also have a Renault Master ex mini bus. It is fitted with a tacograph wich we would like to remove, did you have one fitted? if so how easy is it too remove? Tia
Hiya, please HELP!! I have exactly the same van as you and I need to remove the rear lining so I can insulate behind it. How did you remove all the round plastic fixings holding the lining up? Did you replace them with new ones? I was thinking about cutting them off and swapping with new but I have no idea what to buy. Thanks so much in advance
6ft 7” Heavy Paramotor Guy you can buy a tool to remove them looks like a cross between a screwdriver and a craw from a hammer. And ye you can buy new ones from eBay. Quite cheap to.
6ft 7” Heavy Paramotor Guy rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F301514629679 rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F293366034992 rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F333502691686 You need you get the correct ones do ensure them. Or just get a multi pack as last link
Awesome thanks for sharing ,just got the exact same base van great Inspiration
User user no problem at all cheers
Loved the colour of the van, I'm thinking of upgrading to a master, like you I'm a bench hand joiner so that sides covered has for electrics just going for leisure batteries to run odd light and radio in back, no plumbing bottled water poured into bowl and wash practical and SIMPLE like me. As long as I have storage for fire wood and my fire extinguisher which I have made into a beast of fire few bears to sit round fire, then I am as happy as a pig in the you know what? I have seen your little red Mercedes so I know the quality of your work, I am no good at attaining all these niftie little this and niftie little that off computer. Anyway thanks for sharing your projects, cheers pal
Michael Holt no problem dude. Cheers.
I love this van. Great job.
I just got my hands on a 2005 master, mini bus. I've 3 kids and i mountain bike so I'm going to build this exact van. Do you have general plans that I could buy off you. I'd like to get dimensions on bed size. How is bed frame constructed?
Where about are the 3 seats set up in the back.
Cheers man. Inspired!
Cool van. Good stuff 👌🏻
Cheers dude.
Nice van well done
Cheers
A keep looking at sprinters and thinking there crazy money and still blow up and think Shal a just race van conversion on one like you done.
Iv done quite a few sprinters to
A love sprinter done fair bit of work on them before but a no if a buy one al have dpf egr fault or it will blow up or something. A no the renault is littel Tammer on power the engine not to bad to work on. See like to have one to fit three moterbikes in back with a bed that is adjusterble in hight so can fit taller bikes in and if going with no bikes can Lower it down.
Look forward to seeing it 👌
Hi guys.
How did you connect the roof rack into those 2 holes on the roof?
I got the interior done so insulation lining etc do I need to do from inside?
Hi mate I have a renault master as well, what did you do with the windows, just curtains? Just cause living through the winter I'm thinking curtains won't be enough insulation, and I don't wanna board them off because I like the day light. Cheers Finn
I got some thermal blinds made up.
Really nice! I love your builds. Have you managed to get your money back on them, taking into account the time you’ve spent?
Ye initially I build them for my self but e I always seem to make money on them. This particular one is still with me. It’s just perfect for what I need.
@@builderonabike You’ve given me lots of inspiration to push on with mine. Subbed 👍🏻
Always good to give ppl inspiration. 👍
If you had to redo the vynl floors, as the heat made it lift up in some ares. What would you suggest? Thanks 😊
Loads of rubber or vinyls on eBay
@@builderonabike Thanks.😊
Show amigo!
Hi we also have a Renault Master ex mini bus. It is fitted with a tacograph wich we would like to remove, did you have one fitted?
if so how easy is it too remove? Tia
No wasn’t one fitted. Sorry.
What kind of windows are these? the side windows with the small top openings? Where can i find these?
They were already fitted as it was a minibus
Hello!
What is the size of the tires? Do they fit perfectly?
It’s been sold now so can’t remember
@@builderonabike I'm thinking about 225 / 75R16, but I'm not sure if they will fit
Think they were 75s
Hiya, please HELP!! I have exactly the same van as you and I need to remove the rear lining so I can insulate behind it. How did you remove all the round plastic fixings holding the lining up? Did you replace them with new ones?
I was thinking about cutting them off and swapping with new but I have no idea what to buy.
Thanks so much in advance
6ft 7” Heavy Paramotor Guy you can buy a tool to remove them looks like a cross between a screwdriver and a craw from a hammer. And ye you can buy new ones from eBay. Quite cheap to.
Singletrack And Starbucks awesome! Do you know what size for new ones? That would be the easiest thing to do just cut the old ones out and replace
Or do you have the eBay link for them? 👌👍👍 thanks so much
6ft 7” Heavy Paramotor Guy there’s loads of different sizes. Just measure the head
6ft 7” Heavy Paramotor Guy rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F301514629679
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F293366034992
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.co.uk%2Fulk%2Fitm%2F333502691686
You need you get the correct ones do ensure them. Or just get a multi pack as last link
Which triplex seat you use in 2nd seats row in drive direction? Thanks
Marek Marek they were juts mini bus seats that where already in the van when I got it. Just re positioned.
@@builderonabike Thanks
what are these tire size?
Uwe Demczuk the vans been sold for 18months dude so cant remember.
235/75/r15
Alto wacherio tenés chamigaso !!!