Yeah, man, good fun! I might give that 22 tooth pinion a try, see what kind of motor I can find for that use, got a few projects to tidy up in first, he he...
And so it begins! Well done to all who have entered so far! Rob and I will be going out for a shakedown run with our "slightly modified" DT02's - hopefully! This is looking good Peter - cheers! 🍻👊👍
Hi McRob, no Mcworries Mcdude, Mcglad to Mchave Mcyou on Mcboard 👍 Will McShoeMcBert be Mcjoining McYou for some McCo-McDriving? I McLook McForward to Mcgetting McYour McTimes McWritten McDown 😆😄😷
Hey I can wallow in being in first place for a week now 🤣 It will all change when more people get involved but I'll enjoy it for now 😁 I notice that your pinion is 32dp rather than 0.8 mod. I know these are similar and should mesh but I have never tried mixing different types. Good luck with getting it into the gearbox. I did have a look for one but wasn't sure whether to spend the money if I wasn't 100% sure it would fit. Good luck with your future runs and thanks for the update 😁👍👍
Hi Pete, I have been assured by my local model shop technicians that the 22t pinion will fit 🤔 so I'm taking their word for it. I only paid £4:99 along with some other bits n bobs for a project I'm doing for someone else but thought it too good of an opportunity to pass by for a better speed time. Next vid coming soon with NO crashes this time ... Congratulations on being 1st in the brushless category 👍
@@cw-01creations46 Trying to get out myself but its been blistering hot (@ 96 F (35.+ C) out). Then this morning it's been raining... cooler temps but a wet ground... Just can't catch a break man...
We have a leaderboard!!! Let the torment begin! 😂 Reserve that bottom spot on the brushed category for the greenies mate! 😂 I don't care where we come on the board..... my only goal is to beat Taylor! He hates it that I beat him on last year's tto2 challenge, he's guna need therapy if I beat him again!! 😂 👍 👍 👍
Done 🤣😆😁 The bottom 2 lines are yours.... I have 2 books of A4 plain paper ready for an update video every weekend until the competition ends 🙃 Looking forward to seeing how things turn out for you speedwise and getting your times up on the board 👍
@@cw-01creations46 I'm guna need more than two lines to get me through doing another speed run with swifty mate!! 😂 😅 🤣 Watch this space my friend! 👍 👍 👍
On the board at least 🙂🙂. I have a 22t on its way too so going to have a play when that arrives. I have 4 more motors here to try that have gradually lower turns so am going to hopefully increase my speed little by little
Hi Addam, fingers crossed the pinion helps with the overall top end plus the higher kv motor should help it along its Merry little way haha Obviously I can't win my own speed competition but there's no harm in trying to set a decent bench mark for others to try and beat 👍 Hopefully I might see you on the board at some point. Thank you for the support Addam, much appreciated as always 🙏
@@cw-01creations46 Yes, I need to get something put together for it. Some motor swapping and tune up stuff is needed for sure to get mine moving fast enough to compete!
Hi, should make my 1st run(s) soon in brushed. I'm curious on how you will put the 22t pinion as I haven't found this info in the manual (only 17 and 19) 🤔 Thanks for the update 😉
Hello 👋, I'm looking forward to seeing how you get on with your speed runs in this competition 👍 I will film the fitting of the 22t pinion in my gearbox housing and upload it to show you that it's not too difficult to do if you want a faster overall run time. Good Luck my friend 👍
Yeah, man, good fun! I might give that 22 tooth pinion a try, see what kind of motor I can find for that use, got a few projects to tidy up in first, he he...
Hi Mads, you won't be in 2nd place if you use the 22t pinion, that's for sure 😆
Great Update I'll be getting another run soon bud great contest. Thanks for all the effort..
Next update today!! 👍👍
Thankyou very much for being a part of it and having some fun along the way 😀
And so it begins! Well done to all who have entered so far! Rob and I will be going out for a shakedown run with our "slightly modified" DT02's - hopefully! This is looking good Peter - cheers! 🍻👊👍
So, the Dynamic Duo are finally getting to stretch their legs 😆😄🤣
I look forward to seeing how you get on and get your times up on the board 👍
Hi Peter. Sorry for the delay in letting you know I will hopefully be entering the brushless comp. Great stuff mate and read you soon dude
Hi McRob, no Mcworries Mcdude, Mcglad to Mchave Mcyou on Mcboard 👍
Will McShoeMcBert be Mcjoining McYou for some McCo-McDriving?
I McLook McForward to Mcgetting McYour McTimes McWritten McDown 😆😄😷
well done pete 👍
Thank you Dom, I'm looking forward to fitting this pinion and using the programme card 😀
Hey I can wallow in being in first place for a week now 🤣 It will all change when more people get involved but I'll enjoy it for now 😁 I notice that your pinion is 32dp rather than 0.8 mod. I know these are similar and should mesh but I have never tried mixing different types. Good luck with getting it into the gearbox. I did have a look for one but wasn't sure whether to spend the money if I wasn't 100% sure it would fit. Good luck with your future runs and thanks for the update 😁👍👍
Hi Pete, I have been assured by my local model shop technicians that the 22t pinion will fit 🤔 so I'm taking their word for it. I only paid £4:99 along with some other bits n bobs for a project I'm doing for someone else but thought it too good of an opportunity to pass by for a better speed time.
Next vid coming soon with NO crashes this time ...
Congratulations on being 1st in the brushless category 👍
Looking good so far....
Thank you my very good friend Bob, in the next video you won't see any speed bumps jump out in front of me 😆😷😄
@@cw-01creations46 Trying to get out myself but its been blistering hot (@ 96 F (35.+ C) out). Then this morning it's been raining... cooler temps but a wet ground...
Just can't catch a break man...
We have a leaderboard!!!
Let the torment begin! 😂
Reserve that bottom spot on the brushed category for the greenies mate! 😂
I don't care where we come on the board..... my only goal is to beat Taylor!
He hates it that I beat him on last year's tto2 challenge, he's guna need therapy if I beat him again!! 😂
👍 👍 👍
Done 🤣😆😁
The bottom 2 lines are yours....
I have 2 books of A4 plain paper ready for an update video every weekend until the competition ends 🙃
Looking forward to seeing how things turn out for you speedwise and getting your times up on the board 👍
@@cw-01creations46
I'm guna need more than two lines to get me through doing another speed run with swifty mate!!
😂 😅 🤣
Watch this space my friend!
👍 👍 👍
@@yodadarksideGreenHawksRC 😆😝😄🤣👍👍👍
On the board at least 🙂🙂.
I have a 22t on its way too so going to have a play when that arrives. I have 4 more motors here to try that have gradually lower turns so am going to hopefully increase my speed little by little
Hi Glenn, you will still be in the Top 3 when you swap over to the 22t pinion, that's for sure 👍
@@cw-01creations46 going to take baby steps but yes, i hope so
The gearing should really make a big difference in the speed! I know in the TT02 speed runs last year it was the only way to get them going! LOL!
Hi Addam, fingers crossed the pinion helps with the overall top end plus the higher kv motor should help it along its Merry little way haha
Obviously I can't win my own speed competition but there's no harm in trying to set a decent bench mark for others to try and beat 👍
Hopefully I might see you on the board at some point.
Thank you for the support Addam, much appreciated as always 🙏
@@cw-01creations46 Yes, I need to get something put together for it. Some motor swapping and tune up stuff is needed for sure to get mine moving fast enough to compete!
@@AddamsPlayground Just to see your name on the board would put a smile on my face as its the taking part that counts 😄👍😆
Hi, should make my 1st run(s) soon in brushed. I'm curious on how you will put the 22t pinion as I haven't found this info in the manual (only 17 and 19) 🤔 Thanks for the update 😉
Hello 👋, I'm looking forward to seeing how you get on with your speed runs in this competition 👍
I will film the fitting of the 22t pinion in my gearbox housing and upload it to show you that it's not too difficult to do if you want a faster overall run time.
Good Luck my friend 👍