You'll are wonderful I used you'll to help me fix my dryer a few months back now having problems with washer thank you'll for the tutorials and the warnings for things to look out for.
You're welcome! We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review We hope that you have a great day!
Just ordered this part but have a related question. Can my machine function with just the hot intake turned on and the cold water valve shut off? due to the holiday will be more than a week to arrive and just curious if I can still run hot/warm cycles?
I already changed the inlet water valve of the Samsung washer and it's still not working ¿Do I have to change the main board controller? Can someone please reply
i changed the cold water inlet valve. then i ran a rinse and spin cycle no problem. Now i try a delicate cycle and now im getting a nf1 code. and the hoses are not mixed up like they said it might be. help
Angelina, if the hoses are definitely not switched I would check the wire harness connectors. It is possible if they were all removed, a couple got switched around.
One for the tub inlet, and one each for the other functions like detergent dispensing. Probably more reliable than other devices to do that, these are just basic solenoid valves that are very reliable.
Dude should of put that hose clamp up a little more where it used to be. Would fire him and throw my lunch in his face if I was his boss. Total bafoon . Would not call again.
There's a fallacy to these videos where someone works on a Brand New machine. Reality is something that's quite dirty and those hoses have sat on that barb for so long that they might have to be CUT to get them off. (I'm old and lived in reality too long.)
You'll are wonderful I used you'll to help me fix my dryer a few months back now having problems with washer thank you'll for the tutorials and the warnings for things to look out for.
Thank you for this video. Just saved me 450 hiring someone.
You're welcome!
We are always happy to help. If you would like to give us a review on Google, we would much appreciate it: g.page/r/CcVUrahZNozMEBM/review
We hope that you have a great day!
is there a way to check the inlet valve for continuity and make sure that it's actually the problem? great video.
Thank you. My valve looked a but different.. just 2 water inked pipes, but otherwise exactly the same and this worked a treat.
Just ordered this part but have a related question. Can my machine function with just the hot intake turned on and the cold water valve shut off? due to the holiday will be more than a week to arrive and just curious if I can still run hot/warm cycles?
Hi guys, I just want to know which is the main difference between dc62 00214q and dc62 00214m, I hope you can help me with my doubt
Need to know where the water lines go to from the cold water inlet valve
Thanks for making this, worked perfectly for my Samsung washer WF410ANR/XAA
Cool!
I already changed the inlet water valve of the Samsung washer and it's still not working ¿Do I have to change the main board controller? Can someone please reply
Thank you.
2 words: Thank. You.
I have a Samsung washing machine top load at it has 4E error code it fills with water then drain right away
Panda the bears Cousin same have u found a problem?
i changed the cold water inlet valve. then i ran a rinse and spin cycle no problem. Now i try a delicate cycle and now im getting a nf1 code. and the hoses are not mixed up like they said it might be. help
Angelina, if the hoses are definitely not switched I would check the wire harness connectors. It is possible if they were all removed, a couple got switched around.
usefull
My goodness, four water solenoids just for cold water!! Samsung puts too much on their washing machines, more = greater number of problems!
One for the tub inlet, and one each for the other functions like detergent dispensing. Probably more reliable than other devices to do that, these are just basic solenoid valves that are very reliable.
Dude should of put that hose clamp up a little more where it used to be. Would fire him and throw my lunch in his face if I was his boss. Total bafoon . Would not call again.
There's a fallacy to these videos where someone works on a Brand New machine. Reality is something that's quite dirty and those hoses have sat on that barb for so long that they might have to be CUT to get them off. (I'm old and lived in reality too long.)
knuckle buster.
Yeah, at some point between 1:25 and 1:34, he banged his knuckle.