2008 Hyundai Coupe SIII 1.6L Petrol Clutch Replacement

Поділитися
Вставка
  • Опубліковано 12 вер 2024
  • 07376369067
    www.williamsmo...
    Support the channel:
    www.paypal.com...

КОМЕНТАРІ • 96

  • @mathewnewton3499
    @mathewnewton3499 Рік тому +7

    Fantastic walkthrough - thank you - and it gave me the confidence to replace the clutch on my 2L. Pretty much exactly the same process, although some slight bolt differences and perhaps a bigger gearbox to manhandle around too. Oh, and the clutch is a pull-type so the release arm needs removing to allow the gearbox off and the thrust bearing needs popping in with the arm *after* the gearbox is back on (there are a couple of videos with further details on here covering the details but in an Elantra). Thanks again!

    • @WMCS
      @WMCS  Рік тому +1

      That’s the one 🍻🍻🍻

    • @williamburnett6980
      @williamburnett6980 8 місяців тому +1

      Wish I read this before starting my clutch, I spent a day trying to pry a siii 2008 clutch from the engine until a friend suggested that. :/ Great video still saved me £100s

  • @jarrydfitzgerald2250
    @jarrydfitzgerald2250 2 роки тому +7

    You make it look so easy. Always impressed that you have the right parts!

    • @WMCS
      @WMCS  2 роки тому

      Thank you.

  • @jeffschultz1190
    @jeffschultz1190 2 роки тому +2

    Man, you do make it look so easy, I’m about to do the 2003 version of this car, going to be the exact same job, about how long did this take? About 8 hours? It’s crazy you got it so fast and took the time to record it all. Great work.

    • @elboynatural79
      @elboynatural79 8 місяців тому

      Holaaa, lo hiciste en el del 2003, como te fue?

  • @roydrury7798
    @roydrury7798 7 місяців тому +2

    very good detail pictures excellent. gives me confidence to do my own. Hope it goes that easy lol!

  • @elboynatural79
    @elboynatural79 8 місяців тому

    Tengo un Hyundai Coupe del 2003 y el motor es igual. Me ha encantado verte trabajar, menudo curro tiene cambiar embrague y luego acordarse donde estaba cada cosa. Muy bueno😊

  • @sudinebabz8651
    @sudinebabz8651 2 роки тому +3

    A new jack « Viking 3 T » : a new weapon for the clutches warrior 😀✨👍🏼

    • @WMCS
      @WMCS  2 роки тому +3

      That’s it mate. Got to keep up the Arsenal.

  • @andyellis307
    @andyellis307 2 роки тому +1

    I hate you making it look so easy dropping that bottom ball joint out lol 😆 my misses had a coupe for years had to change bottom ball joints didn't drop as easy as that. Great vid as always Kev

    • @WMCS
      @WMCS  2 роки тому +1

      😂🍻.., a bit like a one pot dinner. One hit wonder ✔️

    • @andyellis307
      @andyellis307 2 роки тому

      Imao

  • @docteurfoulamor1330
    @docteurfoulamor1330 2 роки тому

    Great job again, Dead Clutch Slayer. I've many respect for you

    • @WMCS
      @WMCS  2 роки тому

      🍻😁.., that’s it mate.

  • @geoffgreenhalgh3553
    @geoffgreenhalgh3553 2 роки тому

    That was a nightmare. Worse than a Mini. Great work Kev.

    • @WMCS
      @WMCS  2 роки тому +1

      Not too bad really 😁🍻🍻🍻

  • @maverick507
    @maverick507 2 роки тому +1

    the gods of the clutch ?? 👌🥇🎄

    • @WMCS
      @WMCS  2 роки тому +1

      😁.., always a pleasure

  • @andy_v4443
    @andy_v4443 2 роки тому +1

    Excellent job Kevin 👍👍👍

    • @WMCS
      @WMCS  2 роки тому

      Thanks mate.

  • @user-rs7dy1mf4d
    @user-rs7dy1mf4d 2 роки тому

    Very close and detail shots are good ! From S. Korea.

    • @WMCS
      @WMCS  2 роки тому

      Thank you. A big hello to South Korea.

  • @ricardo7360
    @ricardo7360 2 роки тому

    as always, a fascinating way of working

    • @WMCS
      @WMCS  2 роки тому

      Thank you.

  • @alexalves-lm3ni
    @alexalves-lm3ni 2 роки тому

    fan of your work, following here in Brazil💪

    • @WMCS
      @WMCS  2 роки тому +1

      Thank you. Big hello to Brazil.

  • @swebb1967
    @swebb1967 2 роки тому +1

    Great video , could learn alot from you , thanks for sharing

    • @WMCS
      @WMCS  2 роки тому +1

      Thanks Simon.

  • @paulp96275
    @paulp96275 2 роки тому +1

    Kevin I see you changed the slave as well because it was wet but if you come across cv boots bust do you replace or advise great work lad always enjoy stay safe and warm 👍👨🏻‍🏭

    • @WMCS
      @WMCS  2 роки тому +4

      I only focus on what will make the clutch work after my repair. Anything else the local garage can have a bite.

  • @bensnare1181
    @bensnare1181 2 роки тому

    Excellent as always kev new milwaukee impact there kev? Seems cleaner than normal

    • @WMCS
      @WMCS  2 роки тому +2

      Yep. Two new Milwaukee. One high torque. And one mid range. Both 1/2 drive.

  • @JMReyes
    @JMReyes 2 роки тому +1

    Hello, if you are a hero to me, I see you work and it seems easy but it has a lot of value that you work alone. What are the worst cars to change clutch ?. A greeting from Spain

    • @WMCS
      @WMCS  2 роки тому +1

      Thank you. I like them all. Except some

  • @scotspie501douglas7
    @scotspie501douglas7 2 роки тому

    love the videos I see you have a few new tools

    • @WMCS
      @WMCS  2 роки тому

      Thanks mate. That’s it. A little inventory upgrade for the next level.

  • @diegomanutencaoautomotiva.
    @diegomanutencaoautomotiva. 2 роки тому

    Excelente, parabéns pelas ferramentas novas👊👊👊👊
    Ferramenta é todo

    • @WMCS
      @WMCS  2 роки тому +1

      🍻🍻🙏🏽

  • @franciscog.v.2621
    @franciscog.v.2621 2 роки тому

    que lujo de reparación..

    • @WMCS
      @WMCS  2 роки тому +1

      🍻🎄

  • @bmw-e30
    @bmw-e30 2 роки тому

    You need to be fairly flexible for this job. Is this easier on a rear wheel drive car?--great camera work.

    • @WMCS
      @WMCS  2 роки тому

      That’s it. Flexibility 🍻🍻

  • @marcoaurelio9227
    @marcoaurelio9227 2 роки тому

    Olá parabéns ,belo trabalho e bom profissionalismo 👏👏👏👏

    • @WMCS
      @WMCS  2 роки тому +1

      🍻🍻🍻🙏🏽

  • @kiject8791
    @kiject8791 2 роки тому +1

    멋집니다!

    • @WMCS
      @WMCS  2 роки тому

      Ok.

  • @mirko5417
    @mirko5417 2 роки тому

    Perfekt!........From Germany;-)

    • @WMCS
      @WMCS  2 роки тому +1

      🍻🍻 thank you.

  • @hamzamohammad7041
    @hamzamohammad7041 2 роки тому

    Love the work lad . I've changed my gearbox other day as it was faulty on a fiat punto 2007 And now the car does not go in gear. I think its the slave cylinder but not sure . Could a faulty slave cylinder prevent it to go in gears?
    And thanks for the fiat punto clutch video u posted.

    • @WMCS
      @WMCS  2 роки тому

      Does it go into gear with the engine switched off. Pump the pedal quickly multiple times to build up pressure in the hydraulics. Then try it.

    • @hamzamohammad7041
      @hamzamohammad7041 2 роки тому

      @@WMCS yes it goes in gears when engine is switched off. But when engine is running ot doesn't go in gears. I'll try to pump it up few times to build pressure. Thanks kevin

  • @martinfield1484
    @martinfield1484 2 роки тому

    Great video

    • @WMCS
      @WMCS  2 роки тому

      Thank you.

  • @realdamageboy
    @realdamageboy 2 роки тому

    but why clutch fluid left black? and air filter when placed back, the reed fell in motor side.

    • @WMCS
      @WMCS  2 роки тому

      You’re too intelligent. … boss level you are 🍻🍻

    • @realdamageboy
      @realdamageboy 2 роки тому

      @@WMCS Thank You, nice video, but now when I see what work there is done, no way I will do it myself, this is only job for experts like You ! Thank You for showing us what it takes to just change the Clutch.

  • @andyguyuk1
    @andyguyuk1 Рік тому

    What was the red stuff you put around the holes and shaft, abit of grease?

    • @WMCS
      @WMCS  Рік тому

      Yes. Rubber grease

    • @andyguyuk1
      @andyguyuk1 Рік тому

      @@WMCS does it have to be rubber grease

  • @giovanniabruzzese5167
    @giovanniabruzzese5167 2 роки тому

    Hy Kevin your sockets do not wear starting you ratchet before you put it on the bolt.

    • @WMCS
      @WMCS  2 роки тому +1

      Yes sometimes. I replace sockets and all tools as they wear and brake. It’s a constant replacement.

  • @castrolgtx5064
    @castrolgtx5064 2 роки тому

    Great video as always Kevin 💥👍 if you get any Dacia Dusters can you please film 🎥 it would be much appreciated 👍💥 I’m starting to get quite a few for servicing and going by experience I’ll have the gearbox out of one within the next few months
    Regards Eric

    • @WMCS
      @WMCS  2 роки тому +2

      No probs. I can’t seem to get hold of any of them. I’ll keep a lookout

    • @jamesbryan88
      @jamesbryan88 2 роки тому +1

      Should be similar to Renault stuff mate. Basically the same cars.

  • @maxthecaddy8451
    @maxthecaddy8451 2 роки тому

    and its thumbs up from me buddy

    • @WMCS
      @WMCS  2 роки тому

      Thanks Mike 🎄🍻🍻

  • @manuelandrade4181
    @manuelandrade4181 2 роки тому

    Hello
    Good job ,top ans simple .
    what is tour model of your milwalkee .

    • @WMCS
      @WMCS  2 роки тому

      Fuel. Thanks.

  • @valle63valle63
    @valle63valle63 2 роки тому

    hello!how many hours,ready?hello from finland🤘

    • @WMCS
      @WMCS  2 роки тому +1

      Not very Long mate. About 3-4hrs

  • @makramgazzeh568
    @makramgazzeh568 2 роки тому

    32:26 what type of degreaser you use plz?

    • @WMCS
      @WMCS  2 роки тому +1

      It’s only brake cleaner.

  • @user-ef2ul4rw1w
    @user-ef2ul4rw1w 2 роки тому

    24:15 new jack

    • @WMCS
      @WMCS  2 роки тому

      Yes mate. New addition to the family.

  • @rene5257
    @rene5257 2 роки тому

    j est regarder dans toute les videos pas trouver toyota yaris 3 1.4 l diessel annee 2012 pas trouve peut etre bientot une !!!

    • @WMCS
      @WMCS  2 роки тому +1

      Je Pense que le auris cest La meme sue la chaine

    • @rene5257
      @rene5257 2 роки тому

      @@WMCS ok merci et bon courage

  • @Phil-1969
    @Phil-1969 2 роки тому

    Kevin
    How does it take up drive if the flywheel spins like that , when you turned it , it seemed not to be connected to the crankshaft

    • @WMCS
      @WMCS  2 роки тому

      Turning the crank is always easy I suppose., I always have to make sure it doesn’t spin.

    • @chrismills9346
      @chrismills9346 2 роки тому

      Think might jump couple teeth on timing belt was too free

  • @javieralvarez9146
    @javieralvarez9146 2 роки тому

    👏👏👏👏👏👏

    • @WMCS
      @WMCS  2 роки тому

      🍻🍻🍻

  • @ponta4129
    @ponta4129 2 роки тому

    please check
    tir airpresure yourcar ifeel a little low

    • @WMCS
      @WMCS  2 роки тому

      Ok.

  • @rdwanaitbihi7284
    @rdwanaitbihi7284 2 роки тому

    Ferst ❤️🔥

    • @WMCS
      @WMCS  2 роки тому

      Absolutely 🥇

  • @jordanb2769
    @jordanb2769 2 роки тому

    Smooth your video on astra helped me change clutch myself. Shame am not more local (Derby). Regarding clutch filements there often seems to be multiple choices for same engines for example I now have coupe 2.0)(FD02 AHJ). And there are listing for 220mm and 215mm. But both filements for same reg anybody know? Thanks
    Looking at valeo 826419

  • @leandrubarretu1733
    @leandrubarretu1733 2 роки тому

    👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

    • @WMCS
      @WMCS  2 роки тому

      🍻🍻🎄🎄

  • @rachels4039
    @rachels4039 2 роки тому +1

    😁😂💃👍👍👍👍

    • @WMCS
      @WMCS  2 роки тому +1

      Woop woop

  • @leopoldosolasimon
    @leopoldosolasimon 2 роки тому

    👊

    • @WMCS
      @WMCS  2 роки тому

      Thanks 🙏🏽