Honda CBR900RR FIREBLADE (CBR954RR) Engine Restoration | Start to Finish.
Вставка
- Опубліковано 26 вер 2024
- Honda CBR900RR FIREBLADE (CBR954RR) is equipped with a 954cc engine, maximum capacity of 154 horsepower, maximum torque of 92Nm. CBR954RR Fireblade can accelerate from 0-100km / h in 3.3 seconds, the maximum speed can reach 286km / h (178mph).
Today I will show you the process of restoring the engine of a Honda CBR954 by a collector from Beijing.
This is one of his motorcycle collection.
What do you think about this video? Please leave your opinion in the comment section.
Thanks.
Have a nice day.
#CBR954
#EngineRestoration
#CBR900RR
One of the most beautiful bikes ever made
Arguably the best CBR ever
I dont know nothing about mechanic not engine engineering, but man I wish i could work with those guys and learn. I have a 2001 Honda CBR 929RR.
I will never sell my 954 ,timeless classic, great video
I bought my sc50 13 years ago. Is my first motorcycle. It's too bad for me to sell.
Same lol. I'm approaching 50,000 miles. The thing has been the most reliable thing I have ever owned.
omg my 954 is for sale and I'm chickening out don't want to sell!!
Awesome video. I have a 2000 CBR 929 with 77k miles on it. It still runs and drives strong, but has developed some oil leaks, a weird cooling issue and needs a paint job. I need to go through my bike as you masterfully shown here. This bike deserves it.
One of the best liter bikes ever made. Easy to ride fast and very forgiving. Rode one just like this.
One of my favorite bikes that I have owned, regret it to this day when I sold it.
I almost bought it a few years ago but i was and still afraid of all bikes ( mechanic and electronic problems)
@@dieudonnembalambalaa look for one with maintenance history. These are well built bikes, not much go wrong with them unless abused and messed with. Easy to repair. Recommend this bike to you only if you are an experienced rider. This is a liter bike, deadly quick. Good luck
@@1970PMD having own one it's famous for cylinder knocking so one must warm her up enough to ride her. Else the other minimal ones like auto CCT and clutch basket torque springs need to be changed on wear and tear.
One of my favorite bikes 954
Ive changed engine for 954. Its very nice design. So clean and simple. Owned one for couple of years.
I have this same bike in the same color scheme. Absolutely love that bike!
Good working
Love From Bangladesh💖💖💝
A tremendous job, great to watch! 👍
I will never let mine go!
I got the 929RR wish I could bring it to you guys I’m in the UK!
Reminds me of my 929. Great video 👍
This guy spent as much time filming, charging cams, setting up tripods, editing, etc. , as he did re- building. Great job. You can tell the guys who are single, or soon to be!😆
Awesome rebirth 👍👌
Excellent video, loved every second 👍🏾🙏🏽
You guys are so good in what you ate going .
Keep up the great work and videos xx 💥💪🏼
Nice work!
This video serves as a great reference for all owners of this machine. Newer bikes are spider webs of chaos underneath.
Cool work
Baba's finale. 'nuff said. '03 bumble bee livery, although I'm quite partial to the 02 white and blue. You can stuff your Reset, Klaus, I'm not parting with mine
So Awesome! Thank You!
nice rebuild the bike sounded fantastic, had one as my first liter bike and broke a screw off in the cam shaft holders after doing the valve shims xD
awesome rebuild! Wish mine can go through this therapeutic rebuild as well
Ótimo serviço de mecânica 👏👏
Awesome!! I LOVE JAPANESE
Excelente video y felicitaciones por el trabajo
I have de same in yellow, just perfect my use.
I hope you re-built with better 1000rr4-rr7 pistons with improved piston skirt to reduce bore scoring.
Nice! I have the cbr929rr. Rebuilding as well.
What did you clean the parts with? What was that bath you showed?
Saludos desde Colombia,quiero aprender todo eso ,me encanta
Круто 👍 восстановите мой так же )!🇷🇺
Svaka cast
Amazing!! 💪🏽
Vídeo muy entretenido, gracias. Espero ver pronto por tu canal una Yamaha R1 💪
Very good!!!
Good job
What they didn't show you was, that you have to have new liners made and coated then fitted, and that ain't cheap, and where do you get the work done 🤷 Couple that with the cost of the pistons/rings, plain bearings, gaskets and all the other stuff you do whilst you're in there and you can say goodbye to £3k+ easily, then there's all that work, just try to take in the amount of it. If you can't do it yourself, once again you're paying, imagine that bill 😬 And all because this bike is fitted with Alusil liners from new, not a good idea, didn't work that well. I've seen a stripped one of these up close and personal, bores and pistons ripped to bits.
This video is the best I've seen so far as why to avoid this bike at all costs!
Do you replate the cylinders?
Making then slighly bigger
Какие работы были проведены с цилиндро-поршневой группой?
Wahrscheinlich neue kolben und die Laufbahn wurde gebuchst.
Das hat man im Video gesehen.
Mfg🙋♂️
Nice rebuild, didn't show the cylinder scoring solution - overbore or liners?
But I am flummoxed most by why you put the old ratty chain back on..... WTF!
Simplemente fabuloso...nice to see
Can you do my blade from 2003?
Top das galaxias! From Brazil
Great 👍👍👍
다시 사고 싶은
ㅎㅎ
Yes sirrr I have 3 of them lol an they all need exactly that attention lol
Wonder how many miles?
Bravo
How do you fixed short block?
Nice....
I have the exact same bike...2002 CBR954RR...... Rode it today in fact, and think i've got a bad coil(s) at the moment for it seems to have lost top-end power and will stutter, vibrate when i try to accelerate to pass at speeds above 75-90 mph.
Any smoke from the exhaust?
😍
This video will be on its way to 1 million views!
What oil you used,tank you.
Das wäre mal mein Traum, das 1x hinzukriegen und 1x zu machen.
🌅🏝📊🏍📈💯💪😎👍
Alguém sabe me dizer porque essa moto não vem a descrição FIREBLADE na carenagem iguais as outras CBR 954 ?
new crankcase? (cylinder)
i failed to mention i am in Arizona but since no one has replied in 8 months i will find a place to send my motor elsewhere
👍👍👍
How did you get everything so clean? :o :o
How much did this cost? Thanks, nice vid
Where is your Shop located. I’d like to get my Vavles done. Just service replace the keepers etc.
Were the cylinders over bored or were new cylinders and pistons used? Would love some more insight as to how you fixed the damage.
apparently he keep the same piston cylinder and bearings...
Not a chance, u need make cylinders bigger for wider pistons
they make it look so simple... but it isn't
I have this same bike, but won't start no spark plugs.i don't if is timing.help please.
Superbe mot attachante, j'en ai eu une, jaune et noire, de 2003 à 2019, elle me manque beaucoup, la marque Honda en fait...
Superbe restauration, juste dommage par contre de ne aborder la méthode utilisée pour la réparation des slaps piston, est ce que le bloc cylindre + pistons ont été changés, ou est ce une rectification avec pistons, segments côte + 25 ? On imagine que le bloc cylindre à été changé, car là dessus il me semble qu'il y a un traitement nikasil de surface vu que c'est de l'aluminium.
Hormis ça, chapeau.
Why are the liners different levels 🤔
I have a 96 cbr900 and it was guarded and one day I decided to put Lucas oil treatment and it started knocking.any suggestions for me
Kurt - Cheel much better music to listen to for the restore.
Top demais
Wow
Can I ask? Did you guys fit cylinder liners here? If so, how much did you bore it by to fit them and did you change the piston rings to something different to work with those?
Узнали что-то о гильзовке этих моторов? Мне сейчас предстоит это
i am in glendale az would someone please reply to my comment everyone else also wants to know where to get cylinders repaired and purchase pistons and other bits and pieces needed to do this job it does not happen magically like this video implies i have two 954s two 929s two 919s two 900s and one 1000 fireblades all with 25,000 miles or more i obviously love these bikes and desperately need info on availability of engine parts and where to purchase them i know chassis parts and such are easy to find from multiple sources and this video author does not reply to anyone that is really disappointing great bikes but without a good running engine they are just Garage Art
How many hours did this take? This is so interesting, 🤙🏼
Nice video 🙂
How many K have the bike? What have you do with the scratch on the bore and cylinders?
That would be the true value to this video wouldn't it? Bearings are easy, bolts are easy, I don't need to see that part.
That's perfectly normal markings to be fair.
@@Twed I know but he sleeved the bore. I wanna see that part.
@@brianmeuse7595 Did he? Now that is something I'd like to have seen too as I didn't think you could on a 954.
@@brianmeuse7595 Just watched it again and you're right. Would love to have that done to mine as I have some very slight hairline cracks running down a couple of cylinders 😬
Where did you got your engine internal parts? In what store or in online shop? Please give me a link on it?
What is the value that should indicate the vacuum when synchronizing the injection bodies?
The value need to be 0 between cylinders, and the vacuum scale is determinated by idle
У них в Японии такой ремонт наверное на каждом углу, как у нас вазовские двигателя
samemu takie naprawy też sie fajnie robi gdy sie ma sprzęt i trochę wiedzy
Ich bringe meine vorbei 🤤👍🏼
Olá! De que Pais é está Oficina??
Just bought my first bike off a guy three weeks ago it’s on my channel. 2 weeks in and my chain snapped and motor blew in the same day. wanna restore my engine 🥲07 cbr Fireblade
A to sa motor vyvlozkoval alebo prehonoval alebo nový nikasil?
с 0 до 100 км/ч за 2.8 секунды
I have an 02 954rr how much would something like this cost?
Around £3k in anywhere in europe
I assume it cost like a bike price
You can find these for like $4000 used in Canada now so yeah. But the old bikes have more character than the new bikes so why get rid of it?
卖不卖?
Motor honda restorasi mekanik KTM
hello where do you get all the torque specs??
Manual
Nao reparei se trocaram a bomba de oleo ,senao ,serviço perdido 🤣
Ziomek.ek wiesz jak wygląda 900rr to jest sc 28 i sc 33
A nie 954
Why no new chain after all that?! 🤣
Can you do mine? Lol
это CBR 954 RR а не 900RR !
أنواع الشكمانات لكل الموتوسيكلات وأيه المناسب للموتوسيكل بتاعك
ua-cam.com/video/XSC1HdyoDvQ/v-deo.html
Nice work!