Fixing Deere Coupler Leaks
Вставка
- Опубліковано 29 тра 2024
- Resealing remotes on a deere 4455 that leak fluid when pressurized
SEAL KIT
amzn.to/3YqLUdu
Located in Oklahoma, home, shop, building, and improvements.
Fabrication and machine work
Growing cattle operation with equipment and improvements
Motorcycles & old vehicles
PO BOX 515 Stillwater ok 74076
Instagram joe_preston_
Venmo joe-preston-4
0:00 disassembly
1:20 replacing barrel seals
11:38 Cup seals in body
12:35 Barrel installation in body
13:05 Ball bearing placement
15:18 Final assembly - Наука та технологія
Thank you for posting this video. I was able to disassemble and reassemble my couplers without a hitch. Keep up the good work!
Thank you! you're welcome it's here to help others through it.
Fantastic video little did I know you could do this but I just ordered new fittings altogether but didn’t realize I still need the rings inside the main housing.
Nice work. If you are ever looking to convert to ISO and get rid of the leaky lock lever on those old 20s 30s and 40s. JD part "SW315-196". 2 piece (insert, coupling), seals back to manufacture locations with new o-rings and back-ups and gives connect/disconnect under pressure ISO couplings.
Thanks for the very
informative video.
Awesome video Joe.
Thank you, Ben.
Clean it has to be kept clean and wash your hands and keep them clean
A very usefull video. TNX.
However at 16:06 the ring goes in wrong way. Made this same mistake myself....
You are correct, I did not realize either till after I had the video published.
I thought that was WALL-E for a moment.
Thanks she sharing. Can you tell me if this kit will also work on a 2955 john deere tractor? When I looked at the description of the one you're working on it says "detail 50 series" not sure what that meant.
This was a 4455 but the 50,55 60 are the same style, last two numbers of the model are the series. It should be the same for you.
By some miracle I found this video. Thanks for putting the work in. I'm a 4440 owner. I know nothing about the scvs except apparantly mine aren't compatible with the new equipment. Should I rebuild a leaky pair or do the conversion to ISO, does that probably fix the leak as well? Thanks!
You're welcome! It's here to help people. Yours are the round-nose Deere style. I like to rebuild the originals and change the hose ends or run the adapters.
the lever on ours in leaking . Is there a way to remove it and replace the o ring?
Yes, there is. I do not have a video for it but am working on one for the older stye.
The two seals that go in the housing does it matter which way they are turned ? One side of the seal has a grove in it
Yes, The groove is what expands to hold the fluid under pressure. They will both point toward each other.
@@joe_preston Just did a remote on a 4560 and a 4055. Thank you for the video. I had the same question about the inner seals. Glad I found this video.
@@jacemillertriplemfarmsaz5019 You're welcome! I made it to help people tackle theirs.
Is their a way to just plug the 4 tube hoses that go to the rear? I don’t need those couplers anyway.
Yes, you can cap them at the remotes or up under the dash where the lines come out of the valve.
Where did you get the rebuilt kit. How mucj did you pay
The kit is RE66985 Here is a link. amzn.to/3w0QlOU
Does a Jd 7800 have the same couplers?
I believe so they are just in the ISO stack casting after 60 series.
Hy what's the JD part no for the kit. My JD agent here in South Africa cannot find it
RE66985
Every farmer in Texas can fix them
I thought I was looking at Wall-E for a moment.