Kubota B8200 Fuel Pump Problem Solved part 1
Вставка
- Опубліковано 20 сер 2024
- Kubota B8200 Fuel Pump Problem
I decided to repair my fuel leak problem by eliminating the source of the leak...... mechanical fuel pump to electric. Will it solve the problem? Check out my other video.
Thanks for posting the video. I did the same thing with my B7100 after watching your video and it’s up and running.
Just bought mine. 1986 production, only 750 hours and almost no rust. runs like a champ but I am ripping through the whole tractor anyway to ensure it will last another 10+ years. you are right that there are only a few videos out there for such a great tractor. keep posting! if you have any videos or information regarding adding LED lights, replacing headlights that would be super helpful. thanks benny!
mhughes4444
Thanks for watching. So far the electric fuel pump works great, no more fuel in the oil.
I added rear facing and fender mounted forward facing led lights. I also fabricated a 1630 loader that originally mounts to a B7200 to fit this tractor. I get time I'll get a video of it and post it with some of the things I've done.
What were the issues when the engine was running with the fuel pump leaking into the oil? Mine has an issue where it’s going to max rpm as soon as it starts up and won’t quit unless you cover the intake. Can’t figure out what keeps it running with the fuel shut off pulled. White smoke also when running max rpm. 🤷
Only issues was oil level over full and if not caught in time it would start leaking from the rear main seal into the clutch / flywheel area.
Thanks for this video. I also have diesel in the engine oil of my Kubota B1600DT with a D950 engine. This afternoon I cleaned my injectors and was about checking the fuel pump when I checked the internet and found your video. Clearly this should be my number one suspect now.
Do you know how to check whether it is the fuel pump or the injector pump that is causing this issue?
2 bolts holds the pump on..... remove the pump and reinstall the in and out fuel lines. The plunger has a small hole in it where it rides against the cam. Push the plunger in several times and if the diaphragm is bad you'll have fuel squirting out of the hole.
Whats the turn screw valve on the injector pump the one that the rubber fuel hose from the primer pump is connected to
Just a bleeder valve to relieve any air in system if you need to prime it after running out of fuel or after maintenance if the fuel filter.
Have you had any other problem with the 8200? Thxs
No. Running great still with no more issues.
Solved?
when u took the injector pump off did come right out because mines stuck and i dont want to damage anything
Fuel pick up pump is what I removed and replaced with electric, but if you want to remove the injector pump, You'll have to remove the side cover and align the control rack pin with the notch on the crankcase. Go to this link and download for free the parts and services manuals. Go to page S63 on the service manual
You'll need to download
D950 engine
WSM Engine manual 70mm stroke
www.kubotabooks.com/AutoIndex/index.php?dir=Engines/
@@bparsons72007 ok thanks alot!
and another question i have a kubota b5001 , its a smaller tractor but its considered gray market and i cant find any parts for it, do u know anywhere that i can find some parts, and did u put a specific electric pump on or can u put any similar one on
i dont know much about tractors
Electric fuel pickup pump i got off ebay. As far as parts just keep checking craigslist or marketplace. Ebay and messicks.com may be a good place to find them as well. Kubota doesn't show anything under books and manuals for the B5001 but I think its almost like the B5100?
www.ebay.com/itm/New-Gas-Diesel-fuel-pump-Inline-Low-Pressure-electric-fuel-pump-12V/282489150556?_mwBanner=1&ul_ref=https%3A%2F%2Frover.ebay.com%2Frover%2F0%2F0%2F0%3Fmpre%3Dhttps%253A%252F%252Fwww.ebay.com%252Fulk%252Fitm%252F282489150556%26rvr_id%3D0%26rvr_ts%3D8a35cd211740aa486262ba6efff7c963&ul_noapp=true&pageci=bff11da0-12e0-427b-9781-9c359663419a&epid=624323510
My first video explains why I added electric.
ua-cam.com/video/R7mKTGNqlHU/v-deo.html