Thabks for the video. Anyone with problems. Snip all the ends and refit 1 at a time. Fixed mine. Had loads of intermittent eml and limp running issues, no boost, idle issues, starting problems. All Fixed. The hoses will be fine. Mine is 19 years old still original vac hoses but the ends got stretched open. Looked fine but they will be loose. 1 at a time snip the end off to fresh rubber and unclip to reroute some to get more slack. When you drive the engine moves and the vac pipe ends pull off or move and leak.
Thanks this is really helpful, I have sameCar which I need this info, and amGrateful for your input here, this info isn’t in the workshop manual at all
is 15w40 engine oil good for your opel...i have same engine and it burns every 10w40 engine oil i put in, i was thinking for the next oil change to put 10w60 is it good or is 15w40 better ?
@@ekodelta1011 Thanks! I have cheched because 4x4 light remains blinking but front wheels dont get traction. Pneumatic actuator works fine, low range shifts properly. Should I check front shafts?
@@jacamaracanovas the light after blinking have to remain On . If blink, must have some problems. Mine too blink but the 4x4 engage normally. I suggest you first to change the vaccum pipes. After check the cables on the sensor on the actuator. And yes check the inside of the actuator for oil. This car have many problems and one of them is the 4x4.
Hello. Too cool the pump a litle bit. This pump has problems usually with electronic components because of heat. I don't know for sure if the fan it cool enough but ii is sime.to put.
Really helpful little video, I was easily able to trace my vacuum leak by using it😁👍
Thabks for the video.
Anyone with problems.
Snip all the ends and refit 1 at a time. Fixed mine. Had loads of intermittent eml and limp running issues, no boost, idle issues, starting problems. All Fixed. The hoses will be fine. Mine is 19 years old still original vac hoses but the ends got stretched open. Looked fine but they will be loose. 1 at a time snip the end off to fresh rubber and unclip to reroute some to get more slack. When you drive the engine moves and the vac pipe ends pull off or move and leak.
Thumbs up. In lack of workshop manual this was helpful.
Thank you for this precious help.
Greetings from Portugal.
Thanks this is really helpful, I have sameCar which I need this info, and amGrateful for your input here, this info isn’t in the workshop manual at all
I am glad to help.
super
so what's the function of 4th(hidden under 3rd) vacuum valve? I found my car that not connected to any pipe.
There are only 3 but i replaced one and did not remove it but only connected wire and pipes to the other.
is 15w40 engine oil good for your opel...i have same engine and it burns every 10w40 engine oil i put in, i was thinking for the next oil change to put 10w60 is it good or is 15w40 better ?
Yes you can use 15w40. I used for years and just this year i used 10w40
nice video. why you have some tubes wraped like aluminum foil?
For nothing specific, only protect more...
HI Eko Delta. ¿Which one is the one leading to 4x4 actuator?
None of the three solenoids here. There are 2 others on the driver side, smaller, one blue and one grey that are connected to the 4x4 actuator
@@ekodelta1011 Thanks! I have cheched because 4x4 light remains blinking but front wheels dont get traction. Pneumatic actuator works fine, low range shifts properly. Should I check front shafts?
@@jacamaracanovas the light after blinking have to remain On . If blink, must have some problems. Mine too blink but the 4x4 engage normally. I suggest you first to change the vaccum pipes. After check the cables on the sensor on the actuator. And yes check the inside of the actuator for oil. This car have many problems and one of them is the 4x4.
Why did you put a fan over the injection pump?
Hello. Too cool the pump a litle bit. This pump has problems usually with electronic components because of heat. I don't know for sure if the fan it cool enough but ii is sime.to put.
fail..too leaks tubes and wrong 4 ways connector