F450 GETS SUPER SINGLES! I THINK I'M GETTING 2 MORE???
Вставка
- Опубліковано 2 жов 2024
- taking this truck to an entirely new level. I always wanted super singles on the rear of my truck but...….I think I like the way they look on the front also....what do you all think? how fast do you think it would be till we got pulled over? should we do 4 super singles? i'm digging the look. if you think we should go super singles all around please share this video, comment like and subscribe if you haven't already. if this video does well we will do supers to all 4 corners and get them painted a custom color along with the lower half of the truck.
follow me on Instagram @Sendit_Steve
huge shout out to BOOTS & HANKS for the hookup on these wheels and tires. I couldn't have done it without you guys. their contact information for the Grantville location is 717-763-7721 also in the video you can pause it and get it. great guys
Bye bye unit bearings and ball joints. Lol
Toby Cline how? There's no more stress than knobby tires that vibrate non-stop.
Weight and offset of the wheel
I’m a truck driver and drive over 100K miles a year. Keep those super singles in the back youll save weight and fuel but super singles were never intended to be steer tires. There’s a reason DOT requires specific regulations on steers. The truck looks nice that way but you have daughters to think about and the looks of your truck aren’t worth the safety. Get those super singles on the back and some firestone FS591 steers
I'll second Max Espinosa comment, been in the trucking industry (class 7 & 8) for almost 10yrs now. The DOT/State Patrol will eat you alive for super singles on the steer... Just put them on the rear and enjoy, leave the front to correct wheels and tires for you, your family, and everyone around you on the road safety. You won't get a fix it ticket, you'll get straight up towed and impounded if you go public roads with those up front.
Not to mention replacing ball joints every weekend, wheel bearing assemblies every other weekend, and tie rods once a month...
Ive been changing semi tires for 20yrs and can tell horror stories of those blowing and destroying everything!! 70mph and sling 100lbs of rubber around?? It wraps around the axle, locks that position up and/or bend an s cam, flat spots rims and ive personaly seen this destroy a disc brake system on a truck. Caps only on trailers. Can always unhook. These look great on design paperwork. Lol!
Keep in mind he isnt driving 10 hours a day and hauling thousands and thousands of pounds
@@flyinsushi8144 I was thinking the same thing the reason is because of heat generation and a 450 daily driver hauling its own weight is hardly going to stress the tires out
You're all full of shit. Cement truck, tri axle dump, anything with a 20,000 pound steer axle has them . Do your homework before you own your stupid mouth.
Looks horrible to me.
Excited for what wheel bearing replacement? Those are gonna wear right out
Really hate the wide tire look guys are doing these days, sorry
I love it so much i don’t even know why, just something about it
bcarbaugh
I think a little bit of stance is good but you’re right there’s a point where it just looks ridiculous. And not in a good way
Horrible!
Longer control arms would push the axle forward so you wouldn’t have to trim the cab as much
Highly trained professional on how to do things...the right or wrong way.
And things like that
Epic failure looks completely dumb
So does your mom but you don't see us bashing her on UA-cam now do you.
People like you is the reason he does it just for the haters ✌
And things like that
Justin Fazekas yeah man I agree, looks fuckn stupid
Looks fucking sick as fuck ima put them on my s10
Why not just buy a semi ? Lol
Right😂😂
Yer right...why not?
@@reddog5753 would be interesting content
Cause you need a CDL
@@alextran8188 you don't need a cdl to own a semi....and as long as you aren't driving commercial you can drive the tractor(bobtail)...just like when someone has an RV or bus conversion...you only need a cdl if you are actually driving commercial....
SMH.....
S-M-H!! .. put rear dullies on the front and single on the rear, if you gonna send it... SEND IT!!!
Mad Max Duh, I mean both on front !!!
Take them wheels to Zimmerman carriers in Ephrata pa they have a wheel polishing machine that’ll make them super singles look brand new
Bye Bye Bearings Ball Joints Tie Rods and Brakes..
Don't forget the ring and pinion , even the little Chinese steering shaft ! That Toney u joint that you can't even grease!! Only a matter of time till them wheels ruin the whole front end that never was designed for this type of stress . It's all good til an accident happen s then them look out .DOT will come down hard on that mod!! Like some red tag action!lol
Shout out to Alcoa Tennessee for producing beautiful aluminium wheels.
Always! Yee yee
Steve when you throw it back together, throw a bunch of antiseize on there.. I ALWAYS do it with aluminum wheels.. never a problem again.
Negative
What a terrible idea, there’s no way that’s safe. Of less importance.....looks like dog sh!t
His name is send it Steve, let him live up to his trademark. And trust me I'm fully aware of how stupid this is.
Well the thing is, I have a lot of family/friends that use the same roads as this guy does.
I really hope he’s not stupid enough to go that fast but, if that wheel comes off at highway speed it turns into a deadly missile. If it goes into oncoming traffic and kills someone it’s not going to be easy to defend vehicular homicide.
Yes I’m being dramatic and thinking worst case scenario, but it’s a risk I wouldn’t want!
Steve do NOT put Super singles on the front of that truck...
Officer on scene : "Why did you drive straight through that bus full of nuns ?!" Steve :" I couldn't stop or turn to avoid them because of my super singles. They look great though, right ?!!!........plugiin and chuggin !!!!!" lol
They make heavy haul steer axle wheels that look kind of like a super single wheel with a higher offset. You can run like a 385 width tire on them. Go see your big truck salvage guys and see if they have a pair. Bet they fit better and likely you can run them without cutting your fender flare.
Don't do the front with the super single my opinion
Puts them on post pictures saying “no trimming slight rub at full turn, little power loss”😂😂 great vid kinda like the look lol
I like it. I think with 2 on the back it will be sweet. But there right, say goodbye to your steering components. Like you said "right or wrong you are the professional"!
So much for work truck lol
Now he needs a new work truck lol
You mean like every other lifted truck?
@@masaallen1009 a slight lift gets you better ground clearance so it has its pros, the higher the lift the more stress and wear so it has its cons. A properly done lift and not too high has tons of benefits if you are working in rough terrain.
Never seize is a wonderful thing, put it on the lugs and around the hub where the rim is in contact!!
I think it would look very awesome to put all 4 on there. Shave the front where it’s rubbing. Clean them up and be on the way. Looks better then street speed dirtymax
And things like that
No!!!
Be cool to see mud tires on that beast...
Steve Jesus Christ 😂😂😂
Lol I have to change semi tires and the trick to change the tires is to take a sledge hammer and hit the side walls in the front. I start with hitting the bottom then the top then sides of needed
when my dad had a tow truck he would use a 4x4 to get aluminum wheels off the hub
Lookin beastly!!
You just ruined a perfectly good truck, you have way too much time on your hands....
For sure go all four! 😍💯💪🏻
What a beast!!put a set on the rear that is gnarly lookin!! Then call mike and send it 🤘🏻
That actually looks really good.. Personally if it were mine i would leave the rear as is
This whole video made me cringe.
I think adding 220 lbs of rotating mass with the wrong offset to each corner is a disaster waiting to happen. Ur gonna wear EVERYTHING out fast. Your braking distance is going WAY up, ur acceleration time is going down, ur traction is going down in all conditions other than dry. Wide is cool but not when it's done in a half assed way.
Woody Balto well said
This guy could fuck up a wet dream.
*braking
@@finger11kiks i'm sure he will be brEAking stuff too but thanks for pointing out my error.
*your or you’re. Not ur.
One more thing may want to take the air psi down from 110 to around 80. With as light as the truck is those ss bounce bad
you do realize that super singles require different bearings and brakes but they are 300lbs less per axel so you will have less weight in the assend witch will help you get stuck more especially in 1inch plus of snow
I have had two done the same thing taking wheels off trucks one time they were wheels that have been on a truck for 15 years and I had to kick them off soon you are going to be whistling diesel Ford style cool wheels but I think they look better on the back
Massive! You're going to have to get some equally massive fender flares to be legal.
Mikes gonna have to step his game up with his wheels on the DirtyMax 😂😂😂
Looks good
Keep up the good work
No bedliner in that beast? First place my 2019 F450 was the linex shop, the dealer ran it over to them before I arrived.
well... looks like your a whole hell of a lot wider than streetspeed
Why, even if u do put them on the back your not gonna get any traction in snow lol complete GOOF
You half to be kidding, Do not be like streetspeed717 enditsteve
@dab 8430 no one cares
Come on Bob you know Streetspeed717 is he’s idol he wants to be just like him so bad !!!!!!
It would be so freaking awesome if EVERONE was the same just like Dab 123 dude. So interesting huh? Lmfao no I wouldn't do this to my truck but yo this isn't my truck. Keep doing what you do Send it Steve, keep plugin & chuggin
@@onementality9781 we all need more youtube trolls like dab 123 in our live just like we need more crackheads on our streets
@@paulhall70 that's just freaking GREAT
Looks like an Alaska truck. I have seen a few polar expedition trucks that look like this... Haha monsters.. But for the streets enjoy changing wheel bearings.
I have to say I prefer the other tires and wheels. Looks much better in my opinion. But not my truck so it dont matter haha
Dude. I don't usually go for the giant tires and diesel rigs thing. But that looks amazing. I would love to see all 4 singled. It looks great up front. Maybe put a wide fender flare on the front? But I am loving the look.
Really? Are you getting a jump on Halloween?
Cant fix stupid, these will eat up that truck suspension in no time. 30$ a hr hauling generators aren't gonna cover your costs lol
I'm a noob to your channel, I think super singles will look awesome.
The main way to grow your channel is to post a LOT.
Keep up the great work, dont let the a-holes get you down.
If you keep them permanently, (and I think you should), you'll need wider fender flares so you don't break your window or ruin the beautiful paint job. Just sayin'.
You have a big boy truck now you need a big boy hammer! I use 8lb sledge to get wheels and rotors off trucks. Just advice
Sure was a lot of work for a test fit.
Looks awful
No hate but, shaking my head and cringing the whole way through this video lol
take it from a guy who has driven a semi for 29 years, take them off.
Love the honesty of wanting a nice RV! Keep on pluggin n chugggin
You said it looks dope. I think you meant to say dopey!
No, he meant smoking dope.
Keep them on the front, Looks so dope.
Couldn’t you use a block of wood and the power steering to press it off like a wheel hub.
I’m a truck driver and it’s true. They suck. They’re only good in good weather. They hydroplane in the rain and they don’t dig in the snow on a tractor trailer. I don’t know how they’ll do in the snow in a 4x4 application. I’ve always wondered about that but I would never put then on my tractor trailer. I do have one question. Those are made for drive tires. Why didn’t you try them on the back before the front?
Looks good till you have to get new tires and see that there 1100$ a piece. Not a typo that's eleven hundred dollars per tire.
How could those adaptors take the weight of that wheel?!!! Next video Steve sends it on its axles!
I think the supers on the rear would be a better option
The truck looks awesome!!!
Come on Steve,that doesn’t look sick at all m8.It looks fucking ridiculous.
Sorry just being straight with u.
Need to buy some extra rear fender tubs to put up front custom wide body lol.
Mike will easily run your ass now, good lord they weigh more than the truck itself. You will have to change the bearings halfway during the race.
PB blaster works pretty good lol
I wouldn’t let this guy work on my weed eater 🤦🏻♂️
Look up snow monster trucks in Alaska. Looks pretty close.
Wow the same comments wrote in like 100 different ways!!!! Nice job people!!🤣👍🏼
Why isn't the jack stand under the truck? Also antisieze the hub mount to avoid the wheel removal again.
Please for the love of god do not put recaps on your truck, virgin tires only lol if a recap blew it will cause carnage on the body of your truck.
Good way to fuck up your studs. A proper breaker par behind the rim gets it every time. But this made for good video lol
Ohhh 101 inches is legal, WELL IS NOT, READ THE LAWS FOR WHEELS, AND LIFT KITS
If u want a nice camper better buy a newer truck so u have something that can tow it :)
Next time a wheel is suck on the front use a piece of wood and power steering you risk to much damage driving around
i would do all fours looks good and all but check with the laws on it first.you don't wanna get pulled because of how you riding.
I don't give a damn what anyone says, you need to buy a set for the back. That looks really good
Please don’t do it
It's called a rubber mallet
Super stupid
Very dangerous improper clearance and suspension travel could find yourself flipping over are in a ditch on the side of the road. Also a lot of stress on those adapters.
how many wheel bearings have you gone through? those wheels must stress those bearings
Bro your crazy that was sketch as F
And things like that
That is so dumb
Now mike can’t complain about loosing tug of war with ya since you will only have 4 wheels
Hey Steve, a trick for next time is to put anti-seize compound on the surface that meets the axle. It works had to do it many times myself. Hi from Michigan keep up the vids.
Guys where I live do this to their trucks. Makes them look like giant roller skates.
Steve it ll be spring before long,go for it .only you to make yourself happy
run them all around
Your a goddamn mad man.
Brave no jackstands sticking half you body in there not a good idea
How many times can we say "Things Like That" in one video?
I Bet you can run over that fusion now!!😂😏
I want you to get a set for the rear to see how it looks with all super single because it looks really good on the truck
@dab 8430 geuss what I don't care about you comment clown😂😂😂
Should have messaged me, looks like shit just like I said it would.