MORE information to come in the next video. This install isn't done yet! 😉 What do you think of it so far? SAVE 5% on your Z07 kit from Sigala by using code "HPO5" 💰
Luvvvv it! 😎👍🏼 I just saw an (Arctic white) Z06 this morning in the Orlando area.. rear spoiler is black, but it was 2 separate pieces. Yours looks like 1whole piece from driver to passenger side. Maybe if the one I saw today was Arctic white to match the car it wouldn't be so noticable.
I see that you’re remodeling sound. You have to remodel your car in the same place at a certain time that I see I know how it is gonna be looking after you get it done so keep going and I will be right here.
I haven’t made it through the video yet, still watching but I’ve seen everything complete already and all I can say is “AWESOME!! Totally awesome!” In my best Spicoli impersonation.
@@HorsePowerObsessedabsolutely 💯 percent especially having the black exterior paint. Can't wait for you to add the zo7 carbon fiber wing. She is going to look bad, definitely in proves the dominant demeanor of the vehicle. Not going to lie the wheel design looks pretty good.
ua-cam.com/video/4D4t752w2Ck/v-deo.html Sigala Z06 install with 154mph test drive video at end. The tips shook a bit and flexed but better than the C8 Z51 they did without the bolts to trunk. I say 100% if u cant get on your GM order.
The C8 kit from Sigala flexes a lot more in that video than the one for the Z06. I think the 100% carbon fiber build attributes to rigidity a lot more than what they make the stingray spoiler out of.
Justin, I was waiting for the "Here, Hold My Beer Moment" 😆 for the cutting portion of the installation 😆 Glad, Sigala stepped in for the assist of installation. Honestly, I was worried about their products quality in looks and fitment... So I'm really looking forward to seeing the up close review of the final product!!! So far it's looking pretty good though! 291 👍 Currently -Shane
Really recommend getting the Makita drill driver 7.2v DF010D for getting all those little T15's and the like. My production staff use those on our shop floor and have really made a huge difference in performance of removal/installation of small hardware. The Z07 pack is coming along very nicely bud, car is going to look phenomenal once it's all done. You going to put a livery on it down the line or keep it murdered out?
@@HorsePowerObsessed Yeah, we used the Milwaukee for a good while but ended up getting the Makita due to the Milwaukee's always breaking on the shop floor. The Makita's were just tougher and had greater torque application. Love the content bud. Really enjoying all of it. Just kind of surprised you don't have more subscribers to the channel. Maybe make a couple challenges to other YT'ers out there like SS717 to help boost some views and get subs. Post up a track day or cars & coffee. Anything helps really.
I appreciate the support, my friend! I collab with street speed from time to time. I am looking to put together a more frequent/consistent cars and coffee style gathering.
Justin, this is great stuff. excellent deep dive on the splitter install. but can you tell us what the tool was sigala used to properly make the slots in the right size and cleanly? camera view blocked being able to tell what was used. i know that panic feeling on cutting into exterior of your car. had the same tension when cutting my vents into my boosted frs to get the engine bay temps down. all is well now and looks sinister. worth taking the plunge for sure. liking the news on the z07 wing having more stability that will be a very intriguing upload.
@@HorsePowerObsessed no i meant the power tool they were using to make the slots. i think you had said in the video that yours wasn't able to make them wide enough or something? or maybe they just a dremel attachment like a die grinder or something?
@@HorsePowerObsessed awesome, makes sense. Now hurry up and edit that video of the wing getting done already! lol I need part two of this content now! bahaha have a great day man.
WoW so far so good! Luckily Alex from Sigala Designs stepped in😬. Im pretty sure you were glad he did. Your really pumping out these diy projects (or should I say diywk/do it yourself with Korey & diywsd/do it yourself with Sigala Designs)🤣 Im jus jealous of ur helpers but AWESOME mods and looking forward to the next one!!! Oh and by the way…WELCOME TO THE ZO6 CLUB🎉🎉🎉
Excellent video and that car is a mean looking sob … black is the best color hands down. Which model race ramps are those you have because I’m looking to get something for my ZLE
@@HorsePowerObsessed I install the front z07 splitter to day on my 25 e ray on the canard I cut of the middle one put in the first two and line up the last two came out great
You got some big ‘uns cutting into that fender brother! 😂 Really enjoying the mod videos. Will be very helpful info for DIY’s wanting to do any of these mods. Keep ‘em coming. 👍
Off the charts better looking. Go full bore with HYPER CAR graphics. You really dont need much to complete that hyper car look. This car would look good with the Verus wing.
Hey brother, do you still think it was necessary to remove the bumper to install this properly or judging by the work? These guys did couldn’t have been installed without removing the bumper completely?
To much in the front. If not tracking thats to much of a track look. Personal opinion but if you think the complete opposite i going to try to see it in your perspective
@@HorsePowerObsessed To each their own . But from my past personal experience I will NEVER put their crap on any of my vehicles. Even if they paid me too. Also their customer service was/is subpar to put it nicely. (Windy flat out lied to me!) I cringe when I see videos like this. AGM on the other hand is awesome to work with and their carbon fiber is MUCH superior. I'm pretty sure Anthony has everything you need for a Z07 package. It might not be listed on his website but that doesn't mean he can't work some magic for you. Your collection is looking stellar by the way. Peace!
I haven't had a bad experience at all. Their quality has been top notch and while it did take me a little while to get ahold of them at first they've been very responsive after I ordered the kit. I love AGM stuff as well so I don't really think you can go wrong either way.
@@HorsePowerObsessed Agree to fully disagree on the Mexican carbon fiber. When you put their Z07 wing on does it have 2 shiny bolts holding winglets on?
@@HorsePowerObsessed Oh I know that, you are correct. You can't order Z07 without aero, but you can factory order a Z06 without ordering the Z07 package and add the factory aero if allocation is given. A number of the Z06's cars have been factory built with full aero and they are not Z07's.
MORE information to come in the next video. This install isn't done yet! 😉 What do you think of it so far? SAVE 5% on your Z07 kit from Sigala by using code "HPO5" 💰
Luvvvv it! 😎👍🏼 I just saw an (Arctic white) Z06 this morning in the Orlando area.. rear spoiler is black, but it was 2 separate pieces. Yours looks like 1whole piece from driver to passenger side. Maybe if the one I saw today was Arctic white to match the car it wouldn't be so noticable.
I see that you’re remodeling sound. You have to remodel your car in the same place at a certain time that I see I know how it is gonna be looking after you get it done so keep going and I will be right here.
Cutting into a $150,000+++ C8 Z06 front bumper is nerve racking for sure. I’m sure you can breath now that it’s finished. Looks fantastic!
Yes sir it is! I'm loving it, though!!
Steve will Justin make you a “Believer”…you can plead the fifth if need be😉
@@markkutsy LOL
Can't get a Z07? No problem! Just build one. I like how you think.
Exactly! And for cheaper than GM offers it!
@@HorsePowerObsessedthat's a major W man!
I haven’t made it through the video yet, still watching but I’ve seen everything complete already and all I can say is “AWESOME!! Totally awesome!” In my best Spicoli impersonation.
lol I agree. It looks like it should have initially in my opinion!
@@HorsePowerObsessedabsolutely 💯 percent especially having the black exterior paint.
Can't wait for you to add the zo7 carbon fiber wing.
She is going to look bad, definitely in proves the dominant demeanor of the vehicle.
Not going to lie the wheel design looks pretty good.
Love the look of the carbon fiber !!
looking forward to seeing the carbon fiber wing put on next.
Thanks for sharing
You're very welcome! I'm pumped for this whole kit!
Looks great now the rear wing, this I want to see how they secure it to frame.
Coming up tomorrow!
ua-cam.com/video/4D4t752w2Ck/v-deo.html Sigala Z06 install with 154mph test drive video at end. The tips shook a bit and flexed but better than the C8 Z51 they did without the bolts to trunk. I say 100% if u cant get on your GM order.
The C8 kit from Sigala flexes a lot more in that video than the one for the Z06. I think the 100% carbon fiber build attributes to rigidity a lot more than what they make the stingray spoiler out of.
Just two words on this project Justin. Well done! 👍👍 Your C8 looks great! Save the Wave 👋
Thanks! 👍
Looks great, with the front splitter, side skirts and the LOW wing. I would keep it just like that. Jmo
Definitely looks good either way but I went a bit... higher...
That front splitter was 3200 bucks you can sell it
Agreed! I already gave it to a friend of mine, though.
Justin,
I was waiting for the "Here, Hold My Beer Moment" 😆 for the cutting portion of the installation 😆
Glad, Sigala stepped in for the assist of installation.
Honestly, I was worried about their products quality in looks and fitment... So I'm really looking forward to seeing the up close review of the final product!!!
So far it's looking pretty good though!
291 👍 Currently
-Shane
Looks awsome Justin. Now your totally ready for action. Just the high wing left🤔
Stay tuned! 🤫
Bro… insane. Been loving the content past few days
Appreciate it! I love modding new cars and this thing still has a ton coming for it!
Wow… looks so freaking good!! IMO the Z07 Package is needed on this car!! 🔥
It is definitely needed! Love it!!
Justin your ZO6 is looking marvelous.
Thanks, man!!
They created a master piece follow up to the original Z07 thanks
100%! It's a beautiful kit that you can't get from Chevy!
Loving this channel! Same boat as you. Ordered non z07 due to constraint. Should have by end of September or October. Black as well.
Heck yeah!!!
Really recommend getting the Makita drill driver 7.2v DF010D for getting all those little T15's and the like. My production staff use those on our shop floor and have really made a huge difference in performance of removal/installation of small hardware.
The Z07 pack is coming along very nicely bud, car is going to look phenomenal once it's all done. You going to put a livery on it down the line or keep it murdered out?
Thanks man. I’m not 100% sure on the livery yet. TBD. I really prefer my Milwaukee fuel stuff but I’ll take a look at it.
@@HorsePowerObsessed Yeah, we used the Milwaukee for a good while but ended up getting the Makita due to the Milwaukee's always breaking on the shop floor. The Makita's were just tougher and had greater torque application.
Love the content bud. Really enjoying all of it. Just kind of surprised you don't have more subscribers to the channel. Maybe make a couple challenges to other YT'ers out there like SS717 to help boost some views and get subs. Post up a track day or cars & coffee. Anything helps really.
I appreciate the support, my friend! I collab with street speed from time to time. I am looking to put together a more frequent/consistent cars and coffee style gathering.
@@HorsePowerObsessed As always, looking forward to any content you post bud. Stay Frosty out there my friend.
Thanks! Always appreciate the support.
Justin, this is great stuff. excellent deep dive on the splitter install. but can you tell us what the tool was sigala used to properly make the slots in the right size and cleanly? camera view blocked being able to tell what was used.
i know that panic feeling on cutting into exterior of your car. had the same tension when cutting my vents into my boosted frs to get the engine bay temps down. all is well now and looks sinister. worth taking the plunge for sure.
liking the news on the z07 wing having more stability that will be a very intriguing upload.
They were just using trim tools and their fingers. Nothing major. The kit they have is modeled from the GM kit so fitment is the same.
@@HorsePowerObsessed no i meant the power tool they were using to make the slots. i think you had said in the video that yours wasn't able to make them wide enough or something? or maybe they just a dremel attachment like a die grinder or something?
Ohh yeah it was a Milwaukee dremel with a cutting bit on it. All they really did differently than what I did was make the openings wider.
@@HorsePowerObsessed awesome, makes sense. Now hurry up and edit that video of the wing getting done already! lol I need part two of this content now! bahaha have a great day man.
Can't wait to see the wing tomorrow.
Do they also make their splitter in carbon flash.
Car looks awesome. Nice job. 👍👍
WoW so far so good! Luckily Alex from Sigala Designs stepped in😬. Im pretty sure you were glad he did. Your really pumping out these diy projects (or should I say diywk/do it yourself with Korey & diywsd/do it yourself with Sigala Designs)🤣 Im jus jealous of ur helpers but AWESOME mods and looking forward to the next one!!! Oh and by the way…WELCOME TO THE ZO6 CLUB🎉🎉🎉
Excellent video and that car is a mean looking sob … black is the best color hands down. Which model race ramps are those you have because I’m looking to get something for my ZLE
Thank you! You can get the same ones I have here: amzn.to/3YyfkGQ
Im putting on front splitter and canard on my E RAY did not get a stencil with mine any advice were can I get one
Where did you get it from? It might be hard to find one.
@@HorsePowerObsessed I install the front z07 splitter to day on my 25 e ray on the canard I cut of the middle one put in the first two and line up the last two came out great
Wow!!! The car looks awesome!!!
It is totally changed! Wait until you see the 2nd part of this video!
That's fantastic! Quite unnerving cutting that front bumper, eh? Been there, done that. Have the anxiety to prove it :)
lol definitely. It was scary for sure.
You got some big ‘uns cutting into that fender brother! 😂
Really enjoying the mod videos. Will be very helpful info for DIY’s wanting to do any of these mods.
Keep ‘em coming. 👍
Lol thanks! It was scary that’s for sure!
Is there any supercharger for c8 z06
That's satin graphite or black rims? They are looking great.
Gloss black! They look killer on this car!
Looks incredible! Hopefully constraints ease up soon
Is the front splitter a solid piece on an actual z07 package? It looks great but the gaps are noticeable
On this piece.
Nope. The Z07 is 3 piece from factory just like this. This kit is molded FROM the stock Z07 kit.
Off the charts better looking. Go full bore with HYPER CAR graphics. You really dont need much to complete that hyper car look. This car would look good with the Verus wing.
Definitely agree! The Z07 kit is needed in my opinion!
Hey man, what did you do with the original carbon flash splitter? I’ll totally buy it from you if you still have it!
I already gave it to a friend of mine, sorry.
@@HorsePowerObsessedit’s ok! If you’re able to respond with where I can get one exactly like it, would be eternally grateful 🙏
I couldn't watch this anymore after the first cut 😂
😂😂😂
Time to Xpel again! looks good
Yes sir! It's already at Blackout Tinting for more!
you know what they say about carbon fiber once you get one piece your instantly hooked hahaha
It definitely seems that way!!
Hey brother, do you still think it was necessary to remove the bumper to install this properly or judging by the work? These guys did couldn’t have been installed without removing the bumper completely?
💯 you definitely have to remove the bumpers for this install
Thanks so much for the prompt response! Beautiful car and build!
Justin, Namaste from Mumbai. Enjoyed the front install on your new ride! Lookin good "Billy Ray"....
Not a fan of carbon fiber trim, but it does look nice on your black Z06.
It really pops with the black paint!
You chased black or carbon flush metallic?
My car is black.
Dude, that looks so badass!
Thanks, man!
You got BALLS
🤣🤣🤣
What Ive been waiting for!!!
2nd part coming tomorrow!
Looks awesome!!!
It really does. It's amazing looking in person, really captivating.
Looks Awesome! Would you be interested in selling me your old front splitter? I’m going to be in Carlisle I could pick it up from you there
I actually gave it to a friend of mine already.
What front bumper is this?
Stock with the z07 kit added
Huh?
Sorry, stock bumper with z07 aero kit added.
The pain of having to cut the front bumper man I felt that and it’s not even my z06 nonetheless looks good 👍🏿
Thanks, man! It's definitely not for the faint of heart!
To much in the front. If not tracking thats to much of a track look. Personal opinion but if you think the complete opposite i going to try to see it in your perspective
Would love to be blessed to own it. Not gonna lie. God is Great
100% agree!
Are you going to sell your OEM splitter and side skirts? Lot of guys could not get the splitter due to constraints
I actually gave it to a friend of mine.
HPO , High wing now.
Coming right up!
I can't believe you put their crap on your car!! AG Motorsports man!!!!
It is actually great quality stuff. I don't put garbage on my cars. I'd love to work with AG Motorsports as well but they don't have the full kit yet.
@@HorsePowerObsessed To each their own . But from my past personal experience I will NEVER put their crap on any of my vehicles. Even if they paid me too. Also their customer service was/is subpar to put it nicely. (Windy flat out lied to me!) I cringe when I see videos like this.
AGM on the other hand is awesome to work with and their carbon fiber is MUCH superior. I'm pretty sure Anthony has everything you need for a Z07 package. It might not be listed on his website but that doesn't mean he can't work some magic for you. Your collection is looking stellar by the way. Peace!
I haven't had a bad experience at all. Their quality has been top notch and while it did take me a little while to get ahold of them at first they've been very responsive after I ordered the kit. I love AGM stuff as well so I don't really think you can go wrong either way.
@@HorsePowerObsessed Agree to fully disagree on the Mexican carbon fiber. When you put their Z07 wing on does it have 2 shiny bolts holding winglets on?
Im in ATLANTA
No z07 wing?
Stay tuned! 🤫
@@HorsePowerObsessed Can you make the black matte?
🎉
🥳🎉
Man....I need to find a better job, LMAO!!!!
😂😂😂 I was there once, my friend!
Man, you want to sell your old Carbon Flash front splitter?
I actually already gave it to a friend of mine.
Damn! Lol
Would you like to sell your splitter?
I actually already gave it away to a friend of mine.
Would you sell me that old front splitter
I already gave it to a friend of mine.
No problem thanks again
Why does everyone call the aero package a Z07? You can order your Z06 with an aero package without having the Z07.
Because you can’t have a z07 without the aero package…
@@HorsePowerObsessed Oh I know that, you are correct. You can't order Z07 without aero, but you can factory order a Z06 without ordering the Z07 package and add the factory aero if allocation is given. A number of the Z06's cars have been factory built with full aero and they are not Z07's.
Looks awesome!
It's really quite gorgeous in person!