Would definitely advise checking to see what sort of cylinder you have first before attempting to drill, you wouldn’t stand a change if you were drilling a 3 star cylinder
your bit needs sharpening buddy. I understand your title.. BUT, I PRESSUMED..if you were a locksmith, YOU DID PICK IT FIRST..and after failing , you resort to that drilling. i am not really sure if you are a locksmith..or maybe just a neighbor who want to help a fellow neighbor. in that case, good job.
Since it's easy for a burglar to snap a handle and gain access to a cylinder, do you think it would be a good idea to weld the outside handle to the door instead of letting it be fixed by screws? Provided that you can still change the cylinder when needed by removing the plate that's on the inside of the door and then removing the cylinder from the inside.
Idiotic comments. He had to get in, he happened to have that drill bit and that machine. Job done, mission accomplished. Just get a life you silly people.
If its a double euro cylinder instead of a thumbturn, then you can't remove the cylinder without a key, drilling or picking it /locksmith @@jodeerans5137
You can pick a euro lock but it takes A LOT of time and skill. barrel pins etc make it a pain in the ass. For the sake of a £5 lock cylinder it isn't worth the time/money
You are right why wasn’t it just Picked...! Because he is a FakeSmith...! I could have Picked it in around 1 to 2 Minutes If that. This guy is an Idiot I’m sad to say.
I've done this and there was more than 2 rows of them pins, I tried each step of the way to open it and now after drilling till all are out, I still cant open it 😭🤣😭 HELP
I just got in from unlocking a door lock in he'll of a state guy told me he followed this guy fuck me mate have a bit of pride u could have picked that in 5 mins you should not be allowed near any sort of tool even the one that's helping u why did I bother buying a van stocking it with tools and so on I hoped they paid the house owner for damage
@@Davidthomasv8 He didnt damage anything u dumb basterd. He broke the old lock which was no use anyway as he had to change the lock anyway. Youre a muppet!
@@VelvetEars_ Nah,i tried to break into my shed a few times.In the end i called a friend who is more savvy with his hands.The problem is that my shed isn't near my home so i could only work with stuff i had with me.He drilled a big hole on the upper side of the lock but he also had to break a sweat to get into the shed...
My lock is 6 cylinder, been drilling for hours and I can turn the barrel freely and even get the lock to go up and down but can't get it to turn to the position where I can slide the whole cylinder out. Any ideas?
have you removed the screw down the edge of the door, the cam on the barrel must be central and inline in order to slide the barrel out, hope this helps
@@rainbowtrout9743 it was actually a snapped drill bit from the previous day that had prevent the barral from going in the right position. I realised it just as I managed to brute force it out
I've done this and there was more than 2 rows of them pins, I tried each step of the way to open it and now after drilling till all are out, I still cant open it 😭🤣😭 HELP
What a plonker! Show every thief how to drill a lock! Why would you even drill this? A locksmith would pick it open! Or use a decent drill bit! Struggling a bit there!!
Paperclip could be used for this "picking". All he does is push the pins into the holes he drilled. Actually pulling the pins out of the drill hole is actually optional.
@@MikkoRantalainen I don't need to watch and learn I already know and yes I did click your link and I've actually seen that video before so nothing new.
Right then John, you go through he drawers and ill have a mooch in the other rooms....
Shouldn’t u have the hoodie on for this procedure?
Would definitely advise checking to see what sort of cylinder you have first before attempting to drill, you wouldn’t stand a change if you were drilling a 3 star cylinder
Wow
You need to be using tct hardplate drill bits
You made that look like hard work!!
Surprised he never just panned the window in 😂
yea he wasnt trying to steal he was trying to remove the cylinder to replace it
If the drill slipped. he would have done.
your bit needs sharpening buddy. I understand your title.. BUT, I PRESSUMED..if you were a locksmith, YOU DID PICK IT FIRST..and after failing , you resort to that drilling. i am not really sure if you are a locksmith..or maybe just a neighbor who want to help a fellow neighbor. in that case, good job.
Look at all the (clueless) experts, this comment section is hilarious.
I see this man is not subbed to lock picking lawyer I see why now
Since it's easy for a burglar to snap a handle and gain access to a cylinder, do you think it would be a good idea to weld the outside handle to the door instead of letting it be fixed by screws? Provided that you can still change the cylinder when needed by removing the plate that's on the inside of the door and then removing the cylinder from the inside.
Would have been quicker to drill it with a cucumber 😂😂😂😂
Wait.. that's my house
Idiotic comments. He had to get in, he happened to have that drill bit and that machine. Job done, mission accomplished. Just get a life you silly people.
Lol that’s a masonry drill bit 😂
Its a tungsten bit for hardend steel, looks simular to masonary bit
Dead right it's a masonry drill bit
Looks like a Bosch multi purpose bit, got the blue spiral along the thread.
@@chrislogan8283 no, thats a bit used for brick... the blue ones are brick bits. i was a door installer and our brick bits were exactly like that one
You made that hard work..
Do you use the same size drill bit from start to finish?
You could use a thinner drill as a pilot hole first , then use bigger drill if you only have cheap drill bits like me 😁
Time to rob a bank
Best bit to use is cobalt.
What are the best drill bits mate, I've lost keys for patio door so I'm going to have to drill it out
Pay to get locks, why you need the best drill to break in your own home. Leave spare keys with someone!!
If its a double euro cylinder instead of a thumbturn, then you can't remove the cylinder without a key, drilling or picking it /locksmith @@jodeerans5137
was that a masonry drill bit ? it looked like it was hardwork
@@IsntThisAStupidName Indeed, I was just thinking I’ve got one of them in the van 😂
Never use normal cilinder lock, use a strong smart lock like the Bold lock
This comments section was too witty and intellectual for me. The method, however, worked just fine. Thanks.
Thank you.
Lock puller would of been quicker
Snap it much quicker
Can i still snap the barrel having fixed knob on the inside? I have same problem with stuck lock.
why wasn't it just picked?
You can pick a euro lock but it takes A LOT of time and skill. barrel pins etc make it a pain in the ass. For the sake of a £5 lock cylinder it isn't worth the time/money
takes about 30 seconds to pick
You are right why wasn’t it just Picked...! Because he is a FakeSmith...! I could have Picked it in around 1 to 2 Minutes If that. This guy is an Idiot I’m sad to say.
Because the house might be getting repossessed and you put new locks on.
Its fir people that cant pick lock a d don't want to pay lock Smith's high prices.
This ploker is using a wronge drill bit
Right drill bit u mean! He was in so quick u dumb basterd!
Every time i have tried it will always brake the bit
I've done this and there was more than 2 rows of them pins, I tried each step of the way to open it and now after drilling till all are out, I still cant open it 😭🤣😭 HELP
You could have just lock snapped that.
Pliers!
Can u even drill?
Wolffenstein Outdoors Sports and Archery
I just got in from unlocking a door lock in he'll of a state guy told me he followed this guy fuck me mate have a bit of pride u could have picked that in 5 mins you should not be allowed near any sort of tool even the one that's helping u why did I bother buying a van stocking it with tools and so on I hoped they paid the house owner for damage
Drill your head yeh u dumb fock. He did the job and thats what matters
@@Davidthomasv8 He didnt damage anything u dumb basterd. He broke the old lock which was no use anyway as he had to change the lock anyway. Youre a muppet!
My drill broke inside while doing this,is there a way to open the door?
Are you still locked out?
@@VelvetEars_ Nah,i tried to break into my shed a few times.In the end i called a friend who is more savvy with his hands.The problem is that my shed isn't near my home so i could only work with stuff i had with me.He drilled a big hole on the upper side of the lock but he also had to break a sweat to get into the shed...
Do not drill key hole
Piano b
2 mins to pick that lock - This is bad,
This is very worrying. Hardly save. Camera action smile.
You no the drill
Or just smash the glass
Just smash the window..
lol
My lock is 6 cylinder, been drilling for hours and I can turn the barrel freely and even get the lock to go up and down but can't get it to turn to the position where I can slide the whole cylinder out. Any ideas?
have you removed the screw down the edge of the door, the cam on the barrel must be central and inline in order to slide the barrel out, hope this helps
@@rainbowtrout9743 it was actually a snapped drill bit from the previous day that had prevent the barral from going in the right position. I realised it just as I managed to brute force it out
@@reepeez glad you sorted it
I've done this and there was more than 2 rows of them pins, I tried each step of the way to open it and now after drilling till all are out, I still cant open it 😭🤣😭 HELP
Yeeehaaa 🤠🤠
Give a guy drill and he thinks he is a locksmith. This is an unprofessional, amateur technique on breaking into a house. Turn yourself in.
Pretty sure he got in so job done no? Please can you make a video showing us the professional way.
What a plonker! Show every thief how to drill a lock! Why would you even drill this? A locksmith would pick it open! Or use a decent drill bit! Struggling a bit there!!
A thief would know how to do this anyway
Either that or they'll just snap the cover off and pull the cylinder out.
That’s not drilling, that’s drilling and picking. Nobody has those tools which is why everyone was searching for “how to drill open a lock”
Paperclip could be used for this "picking". All he does is push the pins into the holes he drilled. Actually pulling the pins out of the drill hole is actually optional.
He calls himself a locksmith ? why didn't he pick the lock open ? it's only a standard 5 pin would have only taken 30 seconds
Because drilling is simple dumb basterd!
@@javaidsadiq5775 *Bastard. Learn too spell before chucking insults BASTARD
@@mistergrimm Fockin BASTERD!
@@mistergrimm D1K sucker!
@@mistergrimm B A S T E R D !
please dont do this,call a locksmith
Really shouldn’t film yourself breaking in someone’s home
Amateur!!😂😂🤣
Pro u mean! He was in within 1:30 secs u dumb b!atch!
@@javaidsadiq5775 Watch and learn: ua-cam.com/video/2lzX5sSTbig/v-deo.html
@@MikkoRantalainen I don't need to watch and learn I already know and yes I did click your link and I've actually seen that video before so nothing new.
@@javaidsadiq5775 My point was that if you want *fast* you should go snapping the cylinder.
@@MikkoRantalainen I know but they're both fast